Wire Technologies 10334-WR Manual


Læs nedenfor 📖 manual på dansk for Wire Technologies 10334-WR (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
40 310GBASE-LX4 1 nm 2 km LC
40GBASE-LX4 Specifications
Form Factor: QSFP+
Data Rate: 40G
Tx/Rx Wavelength: 1310nm
Compatible with: See Table
Reach: 2km
Cable Type: MMF/SMF
Interface Type: QSFP+
DDM/DOM: Yes
Connector Type: Duplex-LC
Power Supply: 3.3V
Temperature Range: 0-70°C
Warranty: Lifetime - See Warranty Document
40GBASE-LX4 Features
Hot pluggable SFP+ footprint
Supports .995 to .5 Gb/s bit rates 39 42
RoHs-6 compliant
Built-in digital diagnostic function
Compliant with OEM vendor mu i-source agreement lt
Testi ng
Compatibility Tested: Each transceiver is tested in an origi-
nal host switch for recognition (Loop back test)
Performance Tested: Tested over an optical connection of
the intended distance. Recreated in the lab using a bit fib re
spool method.
100% Testing of all Transceiver s: No Batch Testing (1-10%)
Popular Compatibility Options
Vendor Part Code
Wire 40GBASE-LX4-WR
Cisco QSFP-40G-UNIV
Juniper JNP-QSFP-40G-LX4
Mellanox MC2210511-IR4
Arista QSFP-40G-LRL4
Brocade -QSFP-LR4L 40G
H QSFP-40G-LX4-SM1310 C3
D-Link DEM-QX02Q-LX4
Intel QSFP-LX4- 40G
Dell 407-BBRC
Extreme 10334
Avago QSFP-LX4-40G
75+ other vendors available
Description
This 4 -LX4 compatible QSFP+ transceiver provides 40G throughput up to 2 over Multi-Mode Fibre (MMF) or Sin-0G km
gle-Mode F (SMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible ibre
with the host OEM switch, router or network interface card (NIC).
This easy to install, hot swappable transceiver has been programmed, uniquely serialized and application tested to
ensure that it will initialize and perform identically to the OEM Transceiver. Digital Optical Monitoring (DOM) support
is also present to allow access to real-time operating parameters. We stand behind the quality of our products and
proudly offer a lifetime warranty.


Produkt Specifikationer

Mærke: Wire Technologies
Kategori: Ikke kategoriseret
Model: 10334-WR
Produktfarve: Sølv
Strømforbrug (typisk): 3.5 W
Driftstemperatur (T-T): 0 - 70 °C
Certificering: CE, FCC, REACH
Bæredygtighedscertifikater: RoHS
Maksimal dataoverførselshastighed: 41200 Mbit/s
Oprindelsesland: Kina
SFP modtagertype: Fiberoptisk
Grænsefladetype: QSFP+
Fiber optisk strømstik: LC
Enkelttilstand fiber (SMF) understøttet: Ja
Multitilstand fiber (MMF) understøttet: Ingen
Maksimal overførselsafstand: 2000 m
Bølgelængde: 1310 nm
Mærke kompatibilitet: MSA Compliant
Gennemsnitstid mellem fejl (MTBF): 1000000 t
Fiber ethernet kabelteknologi: 40BASE
Minimal driftstemperatur: 0 °C
Maksimal driftstemperatur: 70 °C
SFP transceiver standard: LX4
Tx effekt (min.): -7 dBmW
Tx effekt (maks.): 4.3 dBmW
Duplex system: Fuld
Digital diagnose overvågning (DDM): Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Wire Technologies 10334-WR stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Wire Technologies Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024