XCell Work Pocket 144590 Manual

XCell Ikke kategoriseret Work Pocket 144590

Læs nedenfor 📖 manual på dansk for XCell Work Pocket 144590 (6 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/6
An- und Ausschalten:
Modi der Arbeitsleuchte: Mit kurzem Betätigen des Power-Knopfs schaltet man
zunächst die Arbeitsleuchte ein und kann anschließend durch wiederholte, kurze
Knopfdrücke die Leuchtsrke einstellen.
Die drei Leuchtstärke-Modi sind: 100 %; 50 %; 25 %
!! Warnung: Die Lampe ist sehr hell! Bitte vermeiden Sie es, das Licht direkt auf
Augen zu richten oder direkt in das Licht zu blicken.
Auswahl der Befestigung und Rotationshigkeit: Diese Leuchte kann entweder
mit Hilfe des Magnets an der Unterseite der Leuchte oder mit Hilfe des Hakens an
der Oberseite fi xiert werden. Nachdem die Leuchte angebracht wurde, kann man
sie dank ihrer Rotationsfähigkeit um 360 ° drehen, um das Licht noch fl exibler
ausrichten zu können.
Erinnerungsfunktion zum Laden: Die XCELL Pocket hat eine
Batteriestatusanzeige mit vier Streifen. Sobald die Kapazität auf 10 % oder
niedriger absinkt, wird der letzte Streifen anfangen zu blinken. Spätestens dann
sollte die Arbeitsleuchte geladen werden.
Akkustand-Indikator:
Ladedauer: Die durchschnittliche Ladedauer des Akkus betgt etwa 3,5
Stunden. Der Ladevorgang wird automatisch beendet, wenn der Akku voll
aufgeladen ist.
Bitte beachten:
Bitte versuchen Sie bei Schäden nicht, das Gerät selbst zu reparieren.
Bitte von Feuer fernhalten, da durch den Akku Explosionsgefahr besteht.
Features
- Built-in high brightness LED light source: 1 * 6W COB LED.
- Excellent light output: The brightness is up to 680 lm, 113 lumens / watt.
- Installation method: On the bottom there is a strong magnet that can be
attached to any metal surface.
- Excellent design: A built-in 100 ° lens ensures a uniformly soft spotlight.
- A rotating hook is located at the head of the work lamp.
- The magnetic bracket can rotate 360 ° around the lamp body.
- Highly ef cient circuit, long life.
- Built-in intelligent battery status indicator that simplifi es charging.
- Micro USB universal charging interface for easy charging with any
standard micro USB charger.
- The robust charging por t cover protects against small amounts of liquid,
dust and other potential damage caused by external in uences.
- Stable and impact-resistant casing (IK06)
- High translucence and high temperature resistance.
- Working conditions: -20 ° C to + 65 ° C
- Dimensions: length x width x height: 110mm x 37mm x 70mm; Weight
(with battery): 173 g
Switch on and off:
Modes of the work light: By brie y pressing the power button, you rst
turn on the work light and can then adjust the brightness by repeated,
short button presses.
The three luminosity modes are: 100 %; 50 %; 25 %.
Warning: This lamp is very bright! Please avoid pointing the light directly
at your eyes or looking directly into the light.
Fastening and Rotational Capability Selection: T his work lamp can be
mounted either by means of the magnet on the bottom or by means of the
hook at the top. Once the lamp has been attached, it can be rotated by 360
° to enable even more fl exible alignment of the light, as needed.
Reminder for charging: The XCELL Pocket has a battery level indicator
with four stripes. As soon as the capacity drops to 10% or lower, the
last stripe will start ashing. At the latest then the work light should be
loaded.
Battery level indicator:
Charging duration: The average charging duration of the battery is about
3.5 hours. Charging stops automatically when the battery is fully charged.
Please note:
Please do not try to repair the device yourself in case of damage.
Please keep away from fi re as the battery may explode.
The built-in magnet is very strong. Please keep all devices and objects
that can be damaged by magnets (e.g. bank cards, PC parts, etc.) away
from it.
If you do not use the light frequently, please recharge it at least once
every three months.
Please do not leave this lamp exposed to direct sunlight, water,
chemicals or corrosive gases for long periods of time.
If the case or lens is dirty, use a soft cloth with some glass cleaner to
clean the lamp. Rough cloths and alcoholic detergents should not be
used.
Never charge unattended!
Merkmale:
Eingebaute LED-Lichtquelle mit hoher Helligkeit: 1 * 6W COB-LED.
Hervorragende Lichtausbeute: Die Helligkeit beträgt bis zu 680 lm,
113 Lumen / Watt.
Installationsmethode: Auf der Unterseite befi ndet sich ein starker Magnet, der an
jeder Metalloberfl äche angebracht werden kann.
Ausgezeichnetes Design: Eine eingebaute 100° Linse sorgt für ein gleichmäßig
weiches Spotlicht.
Ein drehbarer Haken be ndet sich am Kopf der Arbeitslampe.
Der Magnetbügel kann um 36 um den Lampenkörper rotieren.
Hochef ziente Schaltung, lange Leuchtdauer.
Eingebaute intelligente Batteriestatusanzeige, welche das Laden vereinfacht.
Micro-USB-Universal-Ladeschnittstelle zum einfachen Laden mit jedem
handelsüblichen Micro-USB Ladegerät.
Die robuste Ladeportabdeckung schützt vor geringe Mengen Flüssigkeit, Staub
und sonstige Scden durch externe Ein üsse.
Stabiles und schlagfestes Gehäuse (IK06)
Hohe Lichtdurchssigkeit und hohe Temperaturbeständigkeit.
Arbeitsbedingungen: -20 °C bis + 65 °C
Maße: Länge x Breite x Höhe: 110 mm x 37 mm x 70 mm; Gewicht (mit Akku):
173 g
10% 25% 75% 100%50%
Der eingebaute Magnet ist sehr stark. Bitte halten Sie sämtliche Gete und
Objekte, die von Magneten beschädigt werden können (z. B. Bankkarten, PC-
Teile, usw.), von ihm fern.
Sollten Sie die Leuchte nicht häufi g nutzen, laden Sie sie bitte dennoch
einmal alle drei Monate auf. Bitte lassen Sie diese Leuchte nicht über längere
Zeit dem direkten Sonnenlicht, Wasser, Chemikalien oder ätzenden Gasen
ausgesetzt.
Sollte das Gehäuse oder die Linse dreckig sein, verwenden Sie bitte ein
sanftes Tuch mit etwas Glasreiniger, um die Leuchte zu säubern. Raue Tücher
und alkoholische Reinigungsmittel sollten nicht verwendet werden.
Nie unbeaufsichtigt aufl aden!
Item No. XCell Pocket
FL 1 STANDARD
Worklight
100% 50% 25%
Light output 680 lm 340 lm 180 lm
Run time 3 h 5 h 10 h
Beam distance 36 m 20 m 17 m
Peak beam Intensity 330cd 180cd 75cd
Impact Resistance 2 Meters
Remarks: The above data is in accordance with the measurement method described
in International Flashlight Measurement Standard ANSI/NEMA FL1. The batteries
used: XCell Pocket with 113655 2500mAh/3.7V lithium battery, Different batteries or
enviroment may affect the above data.
Item No. XCell Pocket
FL 1 STANDARD
Worklight
100% 50% 25%
Light output 680 lm 340 lm 180 lm
Run time 3 h 5 h 10 h
Beam distance 36 m 20 m 17 m
Peak beam Intensity 330cd 180cd 75cd
Impact Resistance 2 Meters
10% 25% 75% 100%50%
Arbeitslampe
XCell Pocket (Art. 144590)
Bedienungsanleitung
Vielen Dank für Ihren Einkauf!
Bitte lesen Sie diese Bedienungsanleitung vor Gerbauch sorgfältig durch und
bewahren Sie diese sorgfältig auf.
1. Sehr starker Magnet /
Very strong magnet
2. Arbeitslampe /
Work lamp
3. Akkustand-Indikator /
Battery level indicator
4. 360° Haken /
360° Hook
5. 100° Linse /
100° Lens
6. Schalter /
Switch
7. Micro-USB Anschluss /
Micro-USB connection
Work lamp
XCell Pocket (Item 144590)
Instruction manual
Thank you for your purchase! Please read this manual carefully before using the
lamp and store the manual carefully.
Remarks: The above data is in accordance with the measurement method described
in International Flashlight Measurement Standard ANSI/NEMA FL1. The batteries
used: XCell Pocket with 113655 2500mAh/3.7V lithium battery, Different batteries or
enviroment may affect the above data.
ene rgy inside GmbH
Ludwig-Elsbett-Straße 8
D-97616 Salz
WEEE-Reg.-Nr. DE 95037264
Made in China


Produkt Specifikationer

Mærke: XCell
Kategori: Ikke kategoriseret
Model: Work Pocket 144590

Har du brug for hjælp?

Hvis du har brug for hjælp til XCell Work Pocket 144590 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret XCell Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer