Xit XTDF5500 Manual
Læs nedenfor 📖 manual på dansk for Xit XTDF5500 (1 sider) i kategorien Blitz. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
Item # XTDF5500
Most Cameras
Elite Series
Universal Flip Flash
PLEASE READ BEFORE YOU USE THE FLASH
IMPORTANT NOTES FOR FLASH PHOTOGRAPHY
AND MAINTENANCE
1. After each picture, wait for at least 4 -5 seconds for the
flash to be fully charged before taking the next shot even
though the ready light is on. This will help to prolong the
lifespan of the flash tube as well as to attain the full
charging capacity of the flash capacitor for precise flash
photography.
2. For precise flash output, it is best to wait till an
intermittent humming sound is heard before depressing
the shutter.
3. Maintain at least 6.6 ft. away from your subject.
4. In the event that the flash exposure is incorrect (over or
under exposed or green auto check light does not light
up), you may take either one or more of the corrective
action: (1) move closer to the object (2) re-adjust your
bounce angle (3) Increase ISO setting.
5. Bounce should only be used on lighter color ceiling.
Note that when using this feature, 2-3 f/stop of light will be
lost due to reflection.
6. Always use a fresh set of 4 batteries of the same brand
and type when old batteries are depleted. Mix and match
batteries of different types/brands will greatly deteriorate
flash performance.
7. When flash is not being used for extended period of
time (>2 weeks), remove all batteries to prevent battery
leakage. After batteries removal, do not expose the flash
unit and batteries to excessive heat such as fire or sun.
8. Charge up and test fire the flash unit at least once per
month to maintain the optimal performance of the flash
tube and charging capacitor.
BATTERY INSTALLATION
Ensure the ON/OFF is in the OFF position. Insert 4 new
AA size batteries according to the battery polarity
indicated inside the battery chamber.
WARNING
Note: This flash unit may halt and not function when the
battery power is not sufficient or when user operates this
unit inappropriately. Please switch it off by its main switch.
Wait for a few seconds and replace the battery if
necessary before switching it on again. This flash unit
should then work again as normal.
COMPATIBILITY
C - Canon Digital E-TTL, E-TTL II cameras & E-TT film
cameras
N - Nikon Digital TTL, i-TTL Cameras & TTL, i-TTL film
cameras
P - Pentax Digital TTL or film
O - Olympus Digital TTL or film
P - Panasonic Digital TTL or film
SA - Sony Alpha & Minolta Digital ADI, D Lenses cameras
& TTL film cameras
MOUNTING THE FLASH ON THE CAMERA
Ensure the ON/OFF is in the OFF position. Slide the flash
hot shoe base onto the camera’s hot shoe contact and
fasten the lock ring in an anti-clockwise motion. Slide the
ON/OFF Switch to the ON position. When the Ready Light
lights up, the flash is ready to fire. Pressing the Test
Button will test fire the unit.
SLAVE FLASH
XTDF5500 can be used as a slave unit. You can enjoy
creative flash photography with multiple lightings from the
various directions.
XTDF5500 synchronizes to any flash produced by the
master flash (either Camera’s built-in flash or camera
manufactures’ original flash) on the camera. Please make
sure XTDF5500 mode is switch to Slave mode.
USING BOUNCE HEAD
Various combination of bounce angle can be used to cut
off unwanted shadow or for special soft effect purposes.
ROUND-STYLE REFLECTOR
A round style reflector is attached to flash head. This
reflector helps throw clean and diffused light over your
subject. This reflector can be moved into or out of place
in front of your flash.
SPECIFICATIONS:
Guide Number: 40m/118ft. @ 105
Circuitry: IGBT (Insulated Gate Bipolar Transistor)
Color Temperature: 5600
Bounce Angle: Up 30-45-60-75-90
Swivel Angle: Left 60-75-90-120-150-180
Right 60-75-90
Flash Duration: 1/700 sec. (Full power)
Recycling Time: 0.5-6 sec.
Number of flashes: 100-300 per set of new batteries
Power Source: 4 AA Batteries (Alkaline, NiCd or NiMH)
Dimension (in): 6.7 x 2.7 x 1.6 (170 x 70 x 40mm)
Weight: 8.8 oz. (250 grams) (w/o batteries & reflector)
FLASH FEATURES
• Guide No: 40m/118ft. @ 105
• Bounce construction
• Slave function
• Round Style Reflector
* Camera dependent features.
Please check your camera operating instruction
manual.
DIRECT FLASH INDIRECT FLASH
Produkt Specifikationer
| Mærke: | Xit |
| Kategori: | Blitz |
| Model: | XTDF5500 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Xit XTDF5500 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Blitz Xit Manualer
8 September 2024
8 September 2024
21 Juli 2024
21 Juli 2024
21 Juli 2024
Blitz Manualer
- Blitz Sony
- Blitz Canon
- Blitz Braun
- Blitz Fujifilm
- Blitz Nikon
- Blitz Olympus
- Blitz Leica
- Blitz Sigma
- Blitz Pentax
- Blitz Rollei
- Blitz Godox
- Blitz Genaray
- Blitz GVM
- Blitz LogiLink
- Blitz Hähnel
- Blitz Quantum
- Blitz Xantech
- Blitz Manfrotto
- Blitz Pulsar
- Blitz Minox
- Blitz Impact
- Blitz Jinbei
- Blitz Neewer
- Blitz Bolt
- Blitz Anton/Bauer
- Blitz Nissin
- Blitz Aputure
- Blitz Metz
- Blitz Vello
- Blitz Goodram
- Blitz Yongnuo
- Blitz Profoto
- Blitz Sunpak
- Blitz SeaLife
- Blitz Dorr
- Blitz Kenko
- Blitz Elinchrom
- Blitz Cactus
- Blitz Cullmann
- Blitz Rotolight
- Blitz SWIT
- Blitz COLBOR
- Blitz PolarPro
- Blitz ANDYCINE
- Blitz Westcott
- Blitz Ikelite
- Blitz Kaiser Fototechnik
- Blitz Lastolite
- Blitz FoxFury
- Blitz Quadralite
Nyeste Blitz Manualer
8 Oktober 2024
2 Oktober 2024
1 Oktober 2024
30 September 2024
27 September 2024
8 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024