Yamaha NTX500 Manual

Yamaha Guitar NTX500

Læs nedenfor 📖 manual på dansk for Yamaha NTX500 (5 sider) i kategorien Guitar. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
Thank you for choosing a Yamaha electric-acoustic guitar.
In order to make the most of the advanced features and performance provided by your
guitar, please read this manual carefully before using the instrument.
Note that this manual covers only the electronic parts of this product. For information on
the other non-electronic parts, refer to the separate Acoustic Guitar Owner’s Manual.
Electric Acoustic Guitar
System73 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury
or even death from electrical shock, short-circuiting, damages, fire or other hazards. These
precautions include, but are not limited to, the following:
Do not open
This instrument contains no user-serviceable parts. Do not open the instrument or attempt to
disassemble or modify the internal components in any way. If it should appear to be malfunction-
ing, discontinue use immediately and have it inspected by qualified Yamaha service personnel.
Water warning
Do not expose the instrument to rain, use it near water or in damp or wet conditions, place it on any
containers (such as vases, bottles, or glasses) containing liquids that might spill into any openings. If
any liquid such as water seeps into the instrument, turn off the power immediately and have the instru-
ment inspected by qualified Yamaha service personnel.
If you notice any abnormality
When one of the following problems occur, immediately turn off the power and remove all batteries
from the instrument, then have the instrument inspected by Yamaha service personnel.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to
you or others, or damage to the instrument or other property. These precautions include, but are
not limited to, the following:
Connection
Before connecting the instrument to other electronic components, turn off the power for all components.
Before turning the power on or off for all components, set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and gradually raise the
volume controls while playing the instrument to set the desired listening level.
Location
Do not place the instrument in an unstable position where it might accidentally fall over.
Handling caution
Do not rest your weight on, or place heavy objects on the instrument, and do not use exces-
sive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a high or uncom-
fortable volume level, since this can cause permanent hearing loss. If you experience any
hearing loss or ringing in the ears, consult a physician.
* Yamaha cannot be held responsible for damage caused by improper use or modifications
to the instrument, or data that is lost or destroyed.
* Information on the battery can be found in the section at the end of this sheet.
* Please read the instruction manual for the external audio device such as a guitar ampli-
fier, etc., prior to use.
EN
Battery Holder
Control Section
Output Jack
(with power switch function)
Pickup Section
NOMENCLATURE/THE CONTROLS
The built-in preamplifier is automatically turned ON when a guitar cable is
connected to the output jack. The tuner can be turned on or off anytime.
q
VOL Control
Controls the volume. Turning the knob fully counterclockwise sets the volume to zero.
*Alwayssetthevolumetozerowhenconnectingordisconnectingthecable.
w
BATT. (Battery Check) Indicator
This indicator will light when the battery needs to be replaced. Please replace the bat-
tery as soon as possible when the BATT. indicator lights.
*The battery check indicator may light momentarily when the TUNER switch is
pressed.Thisisnotasignhowever,thatthebatterypowerislow.
e
3-Band Equalizer
The knob positions in the figure show the flat level setting. Turn clockwise to boost, or
counter clockwise to cut.
LOW : Boosts or cuts the level of the low frequencies.
MID : Boosts or cuts the level of the middle frequencies. The AMF control r adjusts
the center frequency of the band affected by this control.
HIGH : Boosts or cuts the level of the high frequencies.
r
AMF (Adjustable Mid Frequency) Control
Sets the center frequency of the band of frequencies affected by the MID equalizer
control. The range is from 80 Hz to 5 kHz.
t
Tuner Display
Displays tuner information.
y
TUNER Switch
Switches the tuner ON/OFF.
SPECIFICATIONS
System: System73 Pickup: Bar Sensor (Piezo type) Preamplifier Controls:
Vol., 3-Band EQ (HIGH, MID, LOW), AMF control, TUNER Output Jack: Combination end
pin/power switch Output Impedance:
1kΩ Batteries: Size AA alkaline battery (LR6)
x2 Battery Life: Approx. 180 hours (Without tuner and using alkaline batteries. May differ
due to operating conditions.) Tuner: Chromatic type (12 semi-tones), A4=440Hz, Accuracy
range +/ 3 cents Accessories: Neck adjustment hex-wrench x1
*Thecontentsofthismanualapplytothelatestspecicationsasofthepublishingdate.
Toobtainthelatestmanual,accesstheYamahawebsitethendownloadthemanualle.
USING THE TUNER
q
Press and hold the TUNER switch until the display lights to switch the tuner
power ON.
w Tune the guitar string until the note name of the desired pitch appears in the display.
e The string is in tune when only the lamp lights in the center of the display.
r Press the TUNER switch again to switch the tuner power OFF. Also, if the note name is not
shown in the display for more than 1 minute, the power will automatically switch OFF.
( display goes off)
*ItmaytakeafewsecondsbeforethetunercandetectpitchesafterbeingswitchedON.
*Thenotenameand displaysmayhavedifcultykeepingupwithirregular
pitchchanges.Graduallychangethepitchandcheckwhentuning.
*
Thetunermaynotbeabletodetectnotesrichwithovertonesorwithveryshortsustain.
*Soundoutputisnotmutedwhenthetunerisbeingused.
Pitch is low g g
g In Tune f f
f Pitch is high
Release Lever
Battery Holder
Alkaline
battery x2
BATTERY REPLACEMENT
As battery power becomes low, the battery check indicator will light. Replace the batteries
as soon as possible.
q Press the release lever on the battery case in the di-
rection indicated by the arrow in the illustration in
order to unlock it, and then slide out the battery holder.
w Remove the old batteries from the battery holder, and
insert the two new size AA alkaline batteries. Make
sure that the poles on the batteries are properly posi-
tioned as shown in the diagram inside of the holder.
e Slide the battery holder back into the battery case and
press rmly so that the battery holder locks in place.
ZX40690 版次 R0


Produkt Specifikationer

Mærke: Yamaha
Kategori: Guitar
Model: NTX500

Har du brug for hjælp?

Hvis du har brug for hjælp til Yamaha NTX500 stil et spørgsmål nedenfor, og andre brugere vil svare dig