Yingli Solar YLM-J 108 Cell M10 Manual

Yingli Solar Solpanel YLM-J 108 Cell M10

Læs nedenfor 📖 manual på dansk for Yingli Solar YLM-J 108 Cell M10 (11 sider) i kategorien Solpanel. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/11

Y I N G L I S O L A R .C O M

This manual applies to photovoltaic modules (“PV modules”,

also commonly known as solar panels) manufactured by Yingli

Energy Development Company Limited (“Yingli Solar”), and

is explicitly written for qualified professionals (“Installer” or

“Installers”), including without limitation licensed electricians

and RAL Certified PV Installers.

I N T RO D U C T I O N

Thank you for choosing Yingli Solar as your PV module provider. We

appreciate your business! This manual contains important information

pertaining to the electrical and mechanical installation and maintenance

of PV modules, and contains safety information that you must read carefully and

be familiar with before handling, installing, and/or maintaining Yingli Solar PV

modules.

Yingli Solar does not assume responsibility and expressly disclaims liability for

losses, damages, or expenses arising out of, or in any way connected with this

Installation and User Manual. Yingli Solar assumes no responsibility for any

infringement of patents or other rights of third parties, which may result from

using Yingli Solar PV modules. No license is granted expressly or by implication

or under any patent or patent rights. The information in this manual is believed to

be reliable, but does not constitute an expressed or implied warranty. Yingli Solar

reserves the right to make changes to its PV modules and other products, their

specifications, or this manual without prior notice.

Yingli Solar and its subsidiaries are not liable for any damages caused by

inappropriate installation, use, or maintenance of Yingli Solar PV modules,

including without limitation damages, losses, and expenses caused by non-

observance of the instructions of this manual or caused by or in connection with

products of other manufacturers.

Yingli Solar PV modules are designed to meet the requirements for the standards

IEC 61215 IEC 61730 and , application class A. Modules rated for use in this

application class may be used in systems operating at greater than 50 V DC

or 240 W, where general contact access is anticipated. Modules qualified for

safety through and and within this application class are IEC 61730-1 IEC 61730-2

considered to meet the requirements for safety class II. In the course of the PV

module certification process, the compliance of this manual with the certification

requirements has been verified by an independent certification laboratory.

This Installation and User Manual is available in different languages. In cases of

discrepancy between versions, the English language version shall control.

Failure to comply with the requirements listed in this manual will invalidate the

Limited Warranty for PV Modules as provided by Yingli Solar at the time of sale to

the direct customer. Additional recommendations are provided to enhance safety

practices and performance results. Please provide a copy of this manual to the

PV system owner for their reference, and inform them of all relevant aspects of

safety, operation and maintenance.

S A F E T Y

General

You must understand and follow all applicable local, state, and federal regulations

and standards for building construction, electrical design, fire, and safety, and

must check with local authorities to determine applicable permitting requirements

before attempting to install or maintain PV modules.

Rooftop PV systems should only be installed on dwellings that have been

formally analyzed for structural integrity, and confirmed to be capable of handling

the additional weighted load of PV system components, including PV modules, by

a certified building specialist or engineer.

For your safety, do not attempt to work on a rooftop until safety

precautions have been identified and taken, including without

limitation fall protection measures, ladders or stairways, and

personal protective equipment (PPE).

For your safety, do not install or handle PV modules under adverse conditions,

including without limitation strong or gusty winds, and wet or frosted roof surfaces.

The flat-plate PV module construction consists of a laminated assembly of solar

cells encapsulated within an insulating material with a rigid glass surface and an

insulated substrate. The laminated assembly is supported by an aluminum frame

that is also used for installation the module. See Figure 1 for an illustration of the

PV module components.

Figure 1: Module components and cross-section of the laminated assembly

Electrical

1. Aluminum Frame

2. Glass

3. Encapsulating EVA

4. PV Cell

5. Backsheet

YINGLI SOLAR GB MODULES

Installation and User Manual

Revision date: Dec. 12th, 2022 | Applicable for IEC certified products | The second edition

Produkt Specifikationer

Mærke:	Yingli Solar
Kategori:	Solpanel
Model:	YLM-J 108 Cell M10

Har du brug for hjælp?

Hvis du har brug for hjælp til Yingli Solar YLM-J 108 Cell M10 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Solpanel Yingli Solar Manualer

Yingli Solar YLM-J 3.0 Pro Manual

1 September 2024

Yingli Solar YLM-J 108 Cell M10 Manual

1 September 2024

Solpanel Manualer

Nyeste Solpanel Manualer

Sharp NU-JB395 Manual

15 December 2024

Perel SOL30P Manual

14 December 2024

Velleman SOL/MK Manual

4 December 2024

V-TAC VT-410B Manual

4 December 2024

Livoo TEA303 Manual

3 December 2024

Osram OSP500 Manual

26 November 2024

EcoFlow Solar Panel 60W Manual

18 November 2024

KKT Kolbe DH05 Manual

15 November 2024

Deye SUN-60K-G04P3-EU-AM4 Manual

14 November 2024

Deye SUN-70K-G04P3-EU-AM4 Manual

14 November 2024