Alcatel Versatis P100 Manual

Alcatel Telefon Versatis P100

Læs nedenfor 📖 manual på dansk for Alcatel Versatis P100 (2 sider) i kategorien Telefon. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

INTRODUCTION

Thank you for choosing Versatis P100. Before using this phone, please read

the SAFETY INSTRUCTIONS first. Your phone comes with various features.

Please thoroughly read this user manual for all the feature operation and

troubleshooting information you need to install and operate your new phone.

SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury,

including the following:

Read and understand all the instructions.1.

Follow all warnings and instructions marked on the product.2.

Unplug this product from the wall outlet before cleaning. Do not use 3.

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Do not use this product near water (for example, near a bath tub, 4.

kitchen sink, swimming pool).

Do not overload wall outlets and extension cords as this can result in the 5.

risk of fire or electric shock.

Unplug this product from the wall outlet under the following conditions: 6.

1) When the power supply cord or plug is damaged or frayed.

2) If the product does not operate normally by following the operating

instructions.

3) If the product has been dropped and the cabinet has been damaged.

4) If the product exhibits a distinct change in performance.

Avoid using a telephone (other than a cordless type) during an electrical 7.

storm. There may be a remote risk of electric shock from lightning.

Do not use the telephone to report a gas leak in the vicinity of the leak.8.

Use only the supplied NiMH (Nickel Metal Hydride) batteries! The 9.

operation periods for the handsets are only applicable with the default

battery capacities

The use of other battery types or non-rechargeable batteries/primary 10.

cells can be dangerous. These may cause interference and/or unit

damages. The manufacturer will not be held liable for damage arising

from such non-compliance.

Do not use third party charging bays. The batteries may be damaged.11.

Please note the correct polarity while inserting the batteries.12.

Do not immerse batteries in water, do not place in fire.13.

Battery Safety Precautions

Do not burn, disassemble, mutilate, or puncture. Like other batteries of •

this type, toxic materials could be released which can cause injury.

To reduce the risk of fire or personal injury, use only the battery listed •

in User’s Guide.

Keep batteries out of children.•

Remove batteries if storing over 30 days.•

CAUTION: Danger of explosion if battery is incorrectly

replaced. only with GPI or BYD Ni-MH AAA 1.2V/500mAh

rechargeable battery or equivalent in the handset. Only

use rechargeable batteries with exactly the same specifications

as those supplied with the product. Using non-rechargeable or

non-conforming batteries can damage the product. The batteries

could split or leak if incorrectly inserted, opened or exposed to heat.

Never dispose of batteries in a fire: the cell could explode. Check

with local code for possible special disposal instruction.

MAIN FEATURES

FSK/DTMF Caller ID auto detect•

Up to 10 records of received Call Log•

Up to 10 records of Phonebook•

Up to 5 records of Redial List•

Personalized settings for Handset and Base (Ringer, Ringer Volume, •

Handset Name, etc.)

Visual Message Waiting Indicator (Network independent)•

Alarm•

Before you begin

Electrical safety

Don’t let the base unit or charger gets wet. Electrical equipment can 1.

cause serious injury if used while you are wet or standing in water.

If the base unit or charger ever falls into water, don’t retrieve it 2.

until you have unplugged the power lead from the mains and the

telephone line plug from the telephone socket (base unit only); then

pull it out by the unplugged cables.

Never use your cordless handset outdoors during a thunderstorm 3.

unplug the base unit from the telephone line and the mains socket

when there are storms in your area. Damage caused by lightning is

not covered by the guarantee.

Interference

If the sound quality gets worse as you move around while on a call, this is

probably caused by interference between the handset and the base unit,

perhaps because you are too near to another phone or other electrical

equipment. Move to a different position to clear the interference. If you do

not move, your call may be cut off.

NOTE: Radio interference in the environment may occasionally cause

a short break in the link between the handset and the base unit while

you are on a call. The handset’s display will flash briefly, while the unit

automatically restores the link.

Out of range warning

If you hear a warning tone during a call, and the sound in the earpiece

becomes faint or distorted, you may be going out of range of the base unit.

Move nearer to the base unit within 20 seconds, until the warning tone

stops. Otherwise, your call may be cut off.

PARTS CHECKLIST

Make sure your package includes the items:

Versatis P100

1 Handset1.

1 Base station2.

1 AC power adaptor3.

1 Telephone line cord4.

2 Rechargeable batteries5.

Versatis P100 duo

•2Handsets1.

•1Basestation2.

•1charger3.

•2ACpoweradaptors4.

•1Telephonelinecord5.

•4Rechargeablebatteries6.

NOTE: If you find any of the parts missing, please contact your local

shop where you buy the product. In multi-handset packs, you will find

one or more additional handsets, chargers with power supply units and

additional rechargeable batteries.

Telephone Jack Requirements

To use this phone, you need a RJ11C type

modular telephone jack which might look like

the one pictured here .If you don’t have a jack,

call your local telephone company to find out

how to get one installed.

INSTALLATION AND SETUP

CAUTION: Disconnect the phone cord from the wall outlet before

installing or replacing the batteries.

Never install telephone wiring during lightning storm.•

Never touch un-insulated telephone wires or terminals, unless the •

telephone line has been disconnected at the network interface.

Never install telephone to operate in wet or damp locations.•

Use only the power pack provided for the base station.•

Use only the supplied NiMH rechargeable batteries.•

Installing and Replacing the Batteries

IMPORTANT: If you are not going to use the telephone for more than 30

days, remove the batteries because they may leak and damage the unit.

Slide open the battery compartment cover.1.

Place the 2 batteries as indicated. Respect polarity.2.

Slide the battery compartment cover back.3.

Put the handset on the base and charge for 15 hours first time. A 4.

beep indicates that the handset is properly placed on the base or

charger.

NOTE: Don’t use non-rechargeable batteries in the handset. They may

burst, causing damage.

Installing the base station

Your phone should be placed on a level surface, such as a desk or table

top.

Plug the power supply & line cord into the base station.1.

Plug the power supply & line cord into the wall socket.2.

Always use the cables provided in the box.3.

Installing the charger (Versatis P100 duo)

Plug the power supply into the charger. 1.

Plug the power supply into the wall socket. 2.

Always use the cables provided in the box.3.

CAUTION: Use only the Thomson Telecom power supply

that came with this unit. Using other power supplies may damage

the unit. Base and charger adaptor type is S002CV0600030, 100-

240Vac/6Vdc/300mA.

KEYS AND DISPLAY

Handset Overview

1. LEFT SOFT KEY (MENU/OK)

In idle mode: Press to access the main menu•

In sub-menu mode: Press to confirm the selection•

During a call: Press to access Intercom/ Phonebook/ Redial List/ Call •

List

2. RIGHT SOFT KEY (CLEAR/BACK/MUTE/INTERCOM)

In main menu mode: Press to go back to idle screen•

In sub-menu mode: Press to go back to previous level•

In sub-menu mode: Press and hold to go back to idle screen•

In editing / predialing mode: Press to clear a character / digit•

In editing / predialing mode: Press and hold to delete all the characters •

/ digits

During a call: Press to mute / unmute the microphone•

In idle mode: Press to intercom another handset•

3. UP

In idle mode: Press to access the call list•

In menu mode: Press to scroll up the menu items•

In Phonebook list / Redial list / Call List: Press to scroll up the list•

During a call: Press to increase the volume•

In ringing: Press to increase the ringer volume•

4. DOWN

In idle mode: Press to access the redial list•

In menu mode: Press to scroll down the menu items•

In Phonebook list / Redial list / Call List: Press to scroll down the list•

During a call: Press to decrease the volume•

In ringing: Press to decrease the ringer volume•

5. TALK ON

In idle / predialing mode : Press to make a call•

In Redial list / Call List / Phonebook entry: Press to make a call to the •

selected entry in the list

During ringing: Press to answer a call•

6. TALK OFF

During a call: Press to end a call and go back to idle screen•

In menu / editing mode: Press to go back to previous menu•

In menu / editing mode: Press and hold to go back to idle screen•

In idle mode: Press and hold to power off the handset•

In idle mode (when the handset is powered off): Press and hold to power •

on the handset

7. ALPHANUMERIC KEYPAD, * (STAR), # (HASH)

Press to insert a digit / character / * / #•

* key in idle mode: Press and hold to enable or disable the keypad lock•

* key during a call (in Pulse mode): Press to switch to tone mode•

# key in Idle mode: Press and hold to turn on / off the ringer•

0 key in predialing / number editing mode: Press and hold to insert a •

pause

# key in Call List mode: Press to review caller’s number if applicable•

8. REDIAL LIST

In idle mode: Press to access the redial list•

9. PHONEBOOK

In idle mode: Press to access the phonebook list•

10. FLASH

In idle / predialing mode: Press to insert a flash•

During a call: Press to dial a flash•

11. MICROPHONE

12. EARPIECE

Base Station Overview

1. PAGE

Press the Page on the base station to page your handset. It will ring for •

approximately 60 seconds.

2. CHARGING CRADLE

LCD Layout

The screen display gives you information on the current status of the

telephone.

Scroll up / down the menu items / Phonebook list / Redial list / Call

List

Steady when the handset is in range of the base. Flash when out of

range of the base or not registered to the base.

Steady when an intercom is in progress.

Flash when there is an incoming internal call.

Indicate a call is in progress.

Indicate that the ringer is switched off.

Steady when an alarm is set. Flash when the alarm time set before

reaches.

Indicate that the keypad is locked.

Indicate when there are received new Visual Message Waiting

(VMWI) not yet read. Will disappear when all the visual messages

have been read.

Indicate when the battery is fully charged.

Whole icon flashes when the battery performs initial charging.

Internal block icon flashes when the battery is in final charging

stage.

Indicate when the battery needs charging.

Flash when low battery power level is detected.

Indicate when more characters are existed before the text currently

displayed.

Indicate when more characters are existed after the text currently

displayed.

Press to select more menu options if applicable

Press to confirm the current selection if applicable.

Indicate new call in the call list.

Press <C/MUTE> to conduct Intercom call when idle

Press <C/MUTE> to go back to previous menu level or cancel the

current action if applicable

Press <C/MUTE> to clear a character or stop the alarm if applicable,

press to mute / unmute during a call.

Menu Structure (Handset)

In idle mode, press <MENU/OK> will firstly access the Phonebook menu.

Refer to the following for the menu structure.

Text and Digit Entry Table

The following tables show you where each letter and punctuation character

can be found. Respective character table will be used when corresponding

menu language is available to select. This will be helpful when storing a

name in the phonebook and renaming your handset.

In editing mode, a cursor is displayed to indicate the current text entry

position. It is positioned at the right of the last character entered.

WRITING TIPS:

Once a character is selected, the cursor will move to the next position after a

short pause.

You can move the cursor within the text by <UP/DOWN> to amend the text

entry.

Press <C> to delete the last character.

Press and hold <C> to delete the entire text string.

Key Assignment Overview

SETTING THE PHONE

Date and Time Settings

You will need to set the correct time and date so that you know when you

received answering machine or call list entries.

Change the date format

Press <OK> and <UP/DOWN> to select 1. .DATE & TIME

Press <OK> to select 2. .DATE FORMAT

Press <UP/DOWN> to select your desired date format (3. or DD-MM-YY

MM-DD-YY).

Press <OK> to confirm.4.

Change the time format

Press <OK> and <UP/DOWN> to select 1. DATE & TIME.

Press <OK> and <UP/DOWN> to select 2. TIME FORMAT.

Press <UP/DOWN> to select your desired time format (3. 12 HR or 24

HR).

Press <OK> to confirm.4.

Set the time

Press <OK> and <UP/DOWN> to select 1. .DATE & TIME

Press <OK> and <UP/DOWN> to select 2. .SET TIME

Press <OK> to enter the time information. The time entered will be in 3.

the format you set in the section.Change the time format

Press <OK> to confirm.4.

NOTE: If time has been set before, the current time will display, otherwise,

HH:MM will display.

Set the date

Press <OK> and <UP/DOWN> to select 1. .DATE & TIME

Press <OK> and <UP/DOWN> to select 2. .SET DATE

Press <OK> to enter the date information. The date entered will be in the 1.

format you set in the section.Change the date format

Press <OK> to conrm.2.

NOTE: If date has been set before, the current date will display, otherwise, DD-

MM-YY will display.

Alarm Settings

You can use this phone to set an alarm clock. When an alarm is set, the

<ALARM Icon> displays on the screen. When the alarm time is reached, the

<ALARM icon> and flash on the screen ringing with the alarm ALARM ON

melody for a duration of 45 seconds. You can press any key to disable the

alarm. If snooze function is activated, the alarm will sound again at the end

of the snooze period of seven minutes.

NOTE:

Key press is still applicable if handset keypad is locked and when the 1.

alarm time is reached.

The alarm volume level is the same as the settings of the handset 2.

ringer volume. If the handset ringer is set to VOLUME OFF, the alarm

still sounds at VOLUME 1 level.

During an external call or internal call, if an alarm is set and when the 3.

alarm time is reached, the <ALARM icon> and ALARM ON will still

flash. An alarm tone will be emitted from the earpiece to notify user

the alarm time is reached. Once user press any key or press and hold

<TALK OFF> to disable the alarm, it will revert to the call duration

screen.

During paging or ringing, the alarm will not sound when the alarm 4.

time is reached. However, if snooze function is enabled, the alarm

will sound again at the end of the snooze period provided that it’s not

ringing or in paging mode at the end of the snooze period.

Turn on/off the alarm

Press <OK> and <UP/DOWN> to select 1. .ALARM

Alcatel Logo and Alcatel name are trademarks of Alcatel and used

under license by Thomson Telecom.

Wall plate

Modular

telephone

line jack

U S E R M A N U A L

Key

Number Editing (For

phone number editing,

date/time editing)

Alphanumeric Editing (For phonebook

name editing and renaming handset)

Key spres

1st

2nd 3rd 4th 5th 6th

space 11

2 A B C 2 2

3 D E F 3 3

4 G H I 4 4

5 J K L 5 5

6 M N O 6 6

7 P

R S 7 7

8 T U V 8 8

9 W X Y Z 9 9

0 00 , P (Pause)

* * ? /

( ) *

# # ‘

‘

-& #

123

456

NEB

View Records

ADD

Enter the Name Enter the Number Select a Ringer Melody

VIEW

EDIT

DELETE

DELETE ALL CONFIRM?

PB S STATU

2. CALL LIST

View Records

ADD PBTO Enter the Name Edit the Number Select a Ringer Melody

DELETE

DELETE ALL

CONFIRM?

DE ILSTA

3. BS SETTINGS

DELETE HS

Enter the PIN

Select a Handset to Delete

DIAL MODE

TONE

PULSE

FLASH T EIM

SHORT

MEDIUM

LONG

CHANGE PIN Enter the d PIOl N Enter the New PIN Enter the New PIN Again

ECO MODE

OFF

4. HS SETTINGS

RING SE PTU INT RING Select a Ringer loMe dy

EXT RING Select a Ringer loMe dy

RING VOL EUM Select a Ringer Volume

TONE SETUP KEY NETO ON

OFF

BATT TOERY NE ON

OFF

OUT OF RANGE

OFF

LANGUAGE

ENGLISH /DEU CH /FRAN IS /TS CA

ITALANO /TURKCE/ESPANOL /E^^HNIKA /

NE DSDERLAN / POLSKI

RE HSNAME Enter the Handset Name

HS DISPLAY HANDSET NAME

TIME

AUTO ANSWER ON

OFF

5. DATE & TIME

6. ALARM

7. REGISTRATION PIN?

DEFAULT PIN?

DA FORMATTE

DD - MM - YY

TIME FORMAT 12 HR

24 HR

SET TIME ENTER TIME

ENTER DATESET DATE

Set Alarm Time SNOOZE OFF

OFF

MM - DD -

DIRECT MEM KEY 1

KEY 2

KEY 3

Produkt Specifikationer

Mærke:	Alcatel
Kategori:	Telefon
Model:	Versatis P100

Har du brug for hjælp?

Hvis du har brug for hjælp til Alcatel Versatis P100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Telefon Alcatel Manualer

Alcatel Temporis 23 Manual

27 September 2024

Alcatel T16 Slimline Manual

21 September 2024

Alcatel F330 Voice Manual

20 September 2024

Alcatel F570 Voice Manual

20 September 2024

Alcatel Temporis 580 Manual

15 September 2024

Alcatel XL595B Voice Duo Manual

13 September 2024

10 September 2024

6 September 2024

6 September 2024

6 September 2024

Telefon Manualer

Nyeste Telefon Manualer

Honor Magic6 Manual

23 November 2024

Panasonic KX-TGU120AZ Manual

21 November 2024

Panasonic KX-TGU432AZ Manual

21 November 2024

Plantronics Practica T110 Manual

16 November 2024

Amplicomms BigTel 1580 Combo Manual

15 November 2024

Doro 2880 Manual

14 November 2024

Doro 1880 Manual

14 November 2024

Lively Mobile+ Manual

13 November 2024

LG Fino Dual Manual

20 Oktober 2024

Profoon PDX-7020 Manual

14 Oktober 2024