Aluratek ABT01FKIT Manual

Aluratek Medieafspiller ABT01FKIT

Læs nedenfor 📖 manual på dansk for Aluratek ABT01FKIT (1 sider) i kategorien Medieafspiller. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

TV & Stereo

Receivers

Or connect to any

device with RCA OUT

(RCA cable included).

Transmit audio up to 33’

away to any Bluetooth

audio device.

Works up to 10 hours

on a full charge.

Connect to any audio output

device with an AUX OUT (3.5 mm)

or headset port (3.5 mm).

Computer MotorcycleMP3 Player

Bluetooth Transmitter

Bluetooth HeadphonesBluetooth Earbuds Bluetooth Speakers

Warranty

Aluratek warrants this product against defect in material or workmanship for 1 YEAR

from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has

been removed or altered on the product.

This warranty does not cover:

A) Cosmetic damage or damage due to acts of God

B) Accident, misuse, abuse, negligence or modification of any part of the product.

C) Damage due to improper operation or maintenance, connection to improper equipment,

or attempted repair by anyone other than Aluratek.

D) Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT

FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR

IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's

products, contents or use of this documentation and all accompanying software, and specifically

disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek

reserves the right to revise or update it's product, software or documentation without obligation to

notify any individual or entity.

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

E-mail: support@aluratek.com

Web: www.aluratek.com/helpdesk

Local (Irvine, CA): 714-586-8730

Toll free: 1-866-580-1978

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Package ContentsIntroduction

Using the Transmitter with Other Devices

Bluetooth Transmitter - Product Highlights Bluetooth Transmitter - Device Operation Bluetooth Transmitter - Device Operation (using with other devices)

Bluetooth Headphones - Product Highlights Bluetooth Headphones - Device Operation Bluetooth Headphones - Device Operation (using with other devices)

Using the Transmitter and Headphones with a TV

Technical Support

aluratek.com

model ABT01FKIT

Quick Start Guide

Wireless TV Streaming Kit

Your order has been carefully packaged and inspected. The following accessories should

be included in your package. Please inspect the contents of the package to ensure that

you have received all items and that nothing has been damaged. If you discover a problem,

please contact us immediately for assistance.

USB Charging Cable

(x2)

Registration Card

RCA-Y Cable 3.5 mm Cable

Charging port

(cable Included)

LED status

indicator

3.5 mm Stereo Jack

Connect to any audio output

device with an AUX OUT /

headset (3.5 mm) port or connect

to any device with RCA OUT

(RCA cable included)

Note: If you want to use ABT01F while charging, please make sure to connect the charging

cable first before powering on ABT01F.

Power ON / OFF / Pairing Button

Charging the battery

The battery is not fully charged and it is highly recommended that you charge ABT01F

before you begin using it.

Note: Using ABT01F “out of the box” will not harm the device. You will experience reduced battery life as the unit

will not be fully charged.

Connect the USB end of the cable provided to your PC or USB power adapter (not

included) and the charger plug to the charging jack of ABT01F. Please charge the battery

for a minimum of (3) hours. The Red LED will be on while charging. When charging is

complete, the red LED will turn off.

Function Operation LED Indicator

Power On Press and hold Power button for 3-5 seconds Blue LED

Enter Pairing

Mode

Ensure ABT01F is turned Off. Press and hold

Power button for 8-10 seconds until LED

flashes red and blue alternately

LED flashes red

and blue alternately

Power Off Press and hold Power button for 5-7 seconds Red LED turns to

Blue LED

Note: The pairing mode will last 2 minutes. ABT01F will power off automatically if no devices can be connected

within 2 minutes.

Pairing with Bluetooth receivers such as speaker, earbud, and headset:

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for detail

instruction. The general pairing procedures are as follows:

1. Make sure ABT01F is turned Off.

2. Activate your device’s Bluetooth function and set your device to pairing mode.

3. Activate ABT01F pairing mode by holding the power button for 8-10 seconds

(LED flashes red and blue alternately).

4. ABT01F and your Bluetooth device will pair automatically

(Please make sure they are next to each other).

5. After conneting successfully, the blue LED will flash.

Note: ABT01F will try to reconnect to the last paired device when it is powered ON / OFF again or when

it is out of range.

Note: ABT01F will not receive any control / feedback from the connected device. Any function on the connected

device such as play / pause will not work on the transmitter.

Note: Your paired device will auto connect to ABT01F. This may take a few seconds to two minutes to reconnect

depending on your device. Note: ABT01FKIT will try to reconnect when it is powered ON / OFF again or when it is out of range.

Note: The pairing mode will last 2 minutes. ABT01FKIT will switch to the standby mode automatically if no

devices can be connected within 2 minutes.

Pairing with the transmitter such as iPhone, smartphone, and tablet:

The pairing procedure will vary depending on the actual device. Please refer to the user

guide of your device for detail instruction. The pairing procedures are as follows:

1. Make sure ABT01FKIT is powered off.

2. Activate ABT01FKIT pairing mode by press and hold the button for 6 seconds.

(Red and Blue LED will flash rapidly)

3. Activate your device’s Bluetooth function and set your device to search for Bluetooth

devices. Select ABT01FKIT when it is found.

4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you

are prompted for PIN, please enter “0000”.

5. If prompted by your device to connect, please select “Yes”.

6. After connecting successfully, the blue LED will flash every 3 seconds.

Note: Please make sure the audio output is set to Bluetooth / ABT01FKIT for audio streaming from the device.

Charging the battery

The battery is not fully charged and it is highly recommended that you charge ABT01FKIT

before you begin using it.

Note: Using ABT01FKIT “out of the box” will not harm the device. You will experience reduced battery life as the

unit will not be fully charged.

Connect the larger USB end of the provided cable to your computer / power adapter.

Connect the micro smaller micro USB end to the USB port of ABT01FKIT. Please charge

the battery for a minimum of 6 hours. The Red LED will be on while charging. When

charging is complete, the red LED will turn Blue.

Function Operation LED Indicator

Enter Pairing

Mode

Ensure ABT01FKIT is turned OFF. Press and

hold button for 6 seconds.

Red and Blue LED

flashes rapidly

Power On

/ Off

Press and hold the button until the red

LED flashes.

Red then Off

Add Bluetooth transmitting functionality to any audio output device with a 3.5 mm AUX

OUT / headset output / RCA output jack to Bluetooth enabled headphones and speakers.

Use the Bluteooth Transmitter to transmit audio wirelessly from your TV to the

Bluetooth headphones.

There are two ways to connect the Transmitter:

The Transmitter and Headset are pre-paired and ready for use out of the box. Simply

power on both devices and enjoy!

Connect the Transmitter to the AUX OUT / headset (3.5mm) port on the back

of your TV.

Thank you for choosing Aluratek’s Wireless TV Streaming Kit. In no time you will be able

to use the Bluetooth Transmitter and Bluetooth Headphones together to listen to rich

hi-fidelity stereo sound from your TV - wirelessly!

Please, read this guide thoroughly and follow the installation and operation procedures

carefully to prevent any damage to the unit and / or any of the devices it connects to.

In addition to making sure only quality materials are used for manufacturing, Aluratek is

also dedicated to provide the best customer satisfaction and support.

The product focus of Aluratek is to bring simple yet elegant connectivity solutions to the

consumers to enhance their consumer electronics, communications and computing

experience. Each product is carefully designed with the consumer in mind. Each product

is solution-driven to address the need of the consumers and deliberately planned to

provide the ultimate user experience.

We hope you enjoy your Aluratek product.

Thank you - Aluratek, Inc.

Micro USB

Charging Port

Next / Previous Track

3.5 mm

LINE IN port

Microphone

Answer Call / End Call / Power ON /

Power OFF / Pair Bluetooth Device / Play / Pause

Volume Control /

LED Indicator

Adjustable Headband

Connect the Transmitter using the RCA-Y cable.

When using the included RCA cable to connect to a TV or tuner / receiver,

please make sure you connect to the RCA OUT. Some TV’s may not have an

RCA OUT. Connecting to the RCA IN will not work.

RCA-IN /

Line-In

RCA-OUT /

Line-Out

AUX OUT /

3.5 mm headset port

Produkt Specifikationer

Mærke:	Aluratek
Kategori:	Medieafspiller
Model:	ABT01FKIT

Har du brug for hjælp?

Hvis du har brug for hjælp til Aluratek ABT01FKIT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Medieafspiller Aluratek Manualer

Aluratek ABCTVKIT Manual

18 August 2024

Aluratek ABT01FKIT Manual

11 August 2024

Aluratek ABCTWSKIT Manual

9 August 2024

Aluratek APMP100F Manual

4 Juli 2024

Aluratek APMP101F Manual

4 Juli 2024

Medieafspiller Manualer

Nyeste Medieafspiller Manualer

AOpen Digital Engine DEX5550 Manual

20 November 2024

D-Link DSM-520 Manual

2 November 2024

NuPrime CDP-9 Manual

12 Oktober 2024

LG LT903 Manual

7 Oktober 2024

LG LVC-C553 Manual

7 Oktober 2024

Jensen CAR140MW Manual

7 Oktober 2024

LG RH399M Manual

7 Oktober 2024

LG VLC8610W3K Manual

7 Oktober 2024

LG V8814P Manual

7 Oktober 2024

Dune HD Base 3D Manual

6 Oktober 2024