ART AR5 Manual


Læs nedenfor 📖 manual på dansk for ART AR5 (1 sider) i kategorien Microfoon. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
The ART AR5 Active Ribbon microphone delivers
the incredibly clear, open and natural tone
associated with typical classic ribbon microphones.
The dual capsule design and integrated active
electronics deliver higher output and more stable
impedance than a standard dynamic ribbon,
maximizing the compatibility and performance
with a wide range of high end preamps.
The AR5’s rugged, low profile design makes it the
ideal choice for any application where the tone of
a classic ribbon microphone is preferred, but the
reliability, output and performance of a condenser
microphone is required.
Although ribbon microphones are by their nature
extremely fragile, the ART AR5 can handle high
sound pressure levels approaching 150dB range.
The low-tension, 2-micron aluminum ribbon design
offers audio reproduction with smooth, natural
extended low and high frequency response.
The asymmetrical figure-8 pickup pattern has an
extended sweet spot on the rear face of the
microphone allowing the recording to accurately
reproduce the natural space and ambient
reverberation of a good sounding live room.
The microphones chassis is precision-tooled
brass with a dent resistant stainless-steel wire-mesh
windscreen. The included shock-mount virtually
eliminates vibration and handling noise, while at
the same time safely securing the microphone in
any position needed during the recording process.
Please Note: the ART AR5 should always be
stored upright in the carrying case when the
microphone is not in use.
Ribbon Microphone
Canada: Yorkville Sound - 550 Granite Court, Pickering, Ontario - Canada L1W 3Y8
USA: Yorkville Sound - 4625 Witmer Industrial Estate - Niagara Falls, NY USA 14305
1. Always protect your ART AR5 from any impact including dropping
the mic, jarring or shaking the microphone during transit. Always
handle ART AR5 with complete care and store the microphone in the
vertical (upright) position when not in use.
2. Never blow into your ART AR5 or tap on the microphone body.
Protect the microphone from any sudden or strong blasts of air movement
from ever reaching your microphone, as it can tear and / or irreparably
damage the fragile ribbon element. When using an ART AR5 , it may
be advisable to use a pop filter, like the optional ART M-WS to protect
the ribbon from percussive events and excessive moisture.
3. When not in use, always keep the ART AR5 in the carrying case
provided and always store the microphone vertically. The ribbon
element in the microphone can 'sag' if the microphone is stored
horizontally for long periods of time, and this will degrade the
microphone's overall performance.
Care of a Ribbon Microphone
All ribbon microphones require special care and careful handling or they will be seriously damaged.
In order to ensure long life for your ART AR5 please always do the following:


Produkt Specifikationer

Mærke: ART
Kategori: Microfoon
Model: AR5

Har du brug for hjælp?

Hvis du har brug for hjælp til ART AR5 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Microfoon ART Manualer

ART

ART AR5 Manual

2 Oktober 2024
ART

ART C3 Manual

2 September 2024
ART

ART M-Three Manual

11 August 2024
ART

ART M-Four Manual

4 August 2024
ART

ART Phantom I Manual

28 Juli 2024

Microfoon Manualer

Nyeste Microfoon Manualer

Audac

Audac APM116MK2 Manual

1 Oktober 2024
Vonyx

Vonyx CMC200 Manual

30 September 2024
Auna

Auna MIC-920B Manual

30 September 2024
Audio-Technica

Audio-Technica ATR1300x Manual

30 September 2024
AKG

AKG D5 CS Manual

29 September 2024
BOYA

BOYA BY-PM700 PRO Manual

29 September 2024