ART C1USB Manual

ART Mikrofon C1USB

Læs nedenfor 📖 manual på dansk for ART C1USB (1 sider) i kategorien Mikrofon. Denne guide var nyttig for 77 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Overview

The ART C1USB delivers the performance and tone of a professional studio quality side

address FET microphone with the convenience and simplicity of direct to digital USB 2.0

audio interface.

C1USB will operate as a standalone unit with any Windows or Mac based recording

system. In addition to being an audio to digital input device, the C1USB microphone

also has an integrated D/A converter that makes the microphone in effect its own audio

interface. The D/A converter provides computer playback to the 1/8th-inch headphone

output jack with volume and mix controls integrated into the microphone chassis. The

volume control sets the overall listening level in the headphones, while the mix control

allows the user to blend the computer audio (playback) and source (microphone) to the

headphones mix. This delivers a zero-latency recording solution.

Additional controls on the microphone include an input gain control to allow setting of

proper input level to your recording software, a -10dB pad switch to ensure distortion-

free reproduction of extremely loud at-source signals, and a a low frequency roll off at

100Hz for improved clarity and presence in your recordings.

High Performance USB Condenser

Microphone Package

Features

• Studio Quality 32mm Gold Sputtered Cardioid Capsule

• USB 2.0 16Bit / 48kHz AD Converter

• Integrated Stereo Headphone Output with Level and Mix Controls,

Input Trim Control, -10dB Input Trim Pad & Low Frequency Roll-Off Switches

• Compatible with Current Windows, Linux and Mac OS-X Operating Systems

• Rugged All Metal Chassis & Stainless Steel Wire Mesh Windscreen

• Hard-tail Microphone Standmount and Desktop Stand Included

Canada: Yorkville Sound - 550 Granite Court, Pickering, Ontario - Canada L1W 3Y8

USA: Yorkville Sound - 4625 Witmer Industrial Estate - Niagara Falls, NY USA 14305

Installation and Operation

Installing the ART C1USB is a simple procedure. Since it is fully USB

compliant, you can use either a Mac running OS-X or any PC running

WindowsXP or later. Simply connect the microphone to a standard

USB port using the included USB cable and plug and play. You will be

able to control your C1USB using the standard audio interface

controls in the Mac OS-X or Windows operating system.

Since it is possible to adjust the level of the signal from the operating

system preferences, and in your recording software, it's a good idea

to be familiar with these controls in the Mac or Windows operating

system. Therefore, we recommend that you follow the enclosed

instructions for either Windows XP or Mac OS-X before installing the

C1USB software driver.

Any 1/8th-inch TRS headphone or earbud can be connected to the

headphone output. It is advised to set the playback level to zero when

connecting the microphone to any USB input when headphones are

connected.

Produkt Specifikationer

Mærke:	ART
Kategori:	Mikrofon
Model:	C1USB

Har du brug for hjælp?

Hvis du har brug for hjælp til ART C1USB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon ART Manualer

2 Oktober 2024

2 September 2024

11 August 2024

6 August 2024

4 August 2024

ART Phantom II Pro Manual

4 August 2024

3 August 2024

31 Juli 2024

28 Juli 2024

22 Juli 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Hollyland LARK M1 Manual

16 December 2024

Power Dynamics PD210 Manual

16 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

Power Dynamics PD220 Manual

15 December 2024

LD Systems MIBS Manual

14 December 2024