Audio-Technica AE2500 Manual

Audio-Technica Mikrofon AE2500

Læs nedenfor 📖 manual på dansk for Audio-Technica AE2500 (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
User Manual
Dual-element Cardioid Instrument Microphone AE2500
■Features
■Notes on use
■Connection procedure
■Specifications
Condenser, dynamic
Cardioid
20 - 17,000 Hz (condenser)
30 - 10,000 Hz (dynamic)
80 Hz, 12 dB/octave (condenser)
-51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
100 ohms (condenser)
600 ohms (dynamic)
148 dB SPL, 1 kHz at 1% T.H.D. (condenser)
158 dB SPL, with 10 dB pad (normal)
124 dB, 1 kHz at Max SPL (condenser)
70 dB, 1 kHz at 1 Pa (condenser)
11-52 V DC, 3 mA typical (condenser)
Flat, roll-off ; 10 dB pad (normal) (condenser only)
390 g
5m dual shielded, 8-conductor cable,
5-pin XLRF-type connector at microphone,
two 3-pin XLRM-type output connectors
• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
* Typical, A-weighted, using Audio Precision System One.
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
08-DEC--2020 Form No.ATGC-L0387-20
Thank you for purchasing this product. Before using the product, read through the user manual to
ensure that you will use the product correctly.
Please keep this manual for future reference.
The AE2500 is intended for use in professional applications where remote power is available. It
requires 11V to 52V DC phantom power only to the condenser output of the supplied cable.
Output from the microphone's 5-pin XLRM-type connector is lowimpedance (Lo-Z) balanced. The
included 5m shielded cable features a 5-pin XLRF-type input connector and two standard 3-pin
XLRM-type output connectors. The balanced signals appear across Pins 2 and 3 (condenser) and
Pins 4 and 5 (dynamic). Pin 1 is ground (shield). Output is phased so that positive acoustic pressure
produces positive voltage at Pins 2 and 4.
An integral 80 Hz hi-pass filter provides easy switching from a flat frequency response to a low-end
roll-off. The roll-off position reduces the microphone’s sensitivity to popping in close vocal use. It also
reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room
reverberation and mechanically-coupled vibrations.
The AE2500 includes an AT8471 isolation clamp to provide secure mounting, versatile positioning,
and effective dampening of unwanted mechanical noise.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for
extended periods. Extremely high humidity should also be avoided.
Connect the output terminals of the microphone to the 5-pin XLRF-type connector on the
included cable. Connect the two 3-pin XLRM-type output connectors on the opposite end of
the cable to devices that have a microphone input (balanced input) compatible with a
phantom power supply.
The output connectors are XLRM-types with polarities as show in the figures below.
For product improvement, the product is sublect to modification without notice.
• Revolutionary dual-element design features two elements (condenser and dynamic) enclosed in a
single-housing
• Dynamic element delivers the aggressive attack of the beater while the condenser captures the
round tonalities of the shell
• Elements are positioned in a perfect phase relationship, something practically unachievable with
two separate microphones
• Robust design for enduring dependability on the road
• Integral 80 Hz HPF switch and 10 dB pad (condenser element)
■Safety precaution
■Cautions for the product
Although this product was designed to be used safely, failing to use it correctly may result in an
accident. To ensure safety, observe all warnings and cautions while using the product.
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty
place.
Element
Polar pattern
Frequency response
Low Frequency response
Open circuit sensitivity
Impedance
Maximum input sound level
Dynamic range (typical)
Signal-to-noise ratio
Phantom power requirements
Switch
Weight
Cable
165.0 mm long, 55.0 mm maximun diameter
Integral 5-pin XLRM-type
Dimensions
Output connector
Included accessories AT8471 isolation clamp for 5/8"-27 threaded stands;
5/8"-27 to 3/8"-16 threaded adapter;
soft protective pouch
1 2
3
Microphone output terminals
PIN1
(ground) PIN5
(Dynamic cold)
PIN4
(Dynamic hot)
PIN2
(Condenser hot)
PIN3 (Condenser cold) PIN3 (cold)
PIN1
(ground)
PIN2
( )hot
Cable output terminals
①
②
③
①
②
③
①
XLR-F5P
②
③
④
⑤
G
( )＋
( )－
G
( )＋
( )－
XLR-M3P×2
Cable connection diagram
Condenser element
Dynamic element
This product requires
48V DC phantom power
for Condenser element.
■ ■Condenser polar attern p Condenser fr r o e: 20~17,000Hzequency esp ns
180°
150°
120°
30°
0°
330°
300°
270°
240°
210°
LEGEND
0°, 50cm
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz Roll-off
60°
90° 10 dB
Response in dB
Frequency in Hertz
10
0
-10
-20
-30
20
■ ■Dynamic polar attern p Dynamic Fr r o e: 30~10,000Hzequency esp ns
180°
150°
120°
30°
0°
330°
300°
270°
240°
210°
LEGEND
0°, 50cm
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
60°
90° 10 dB
Response in dB
Frequency in Hertz
10
0
-10
-20
-30
20
100
50 200 10k5k1k500 2k 20k
100
50 200 10k5k1k500 2k 20k

Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Mikrofon
Model: AE2500

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica AE2500 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrofon Audio-Technica Manualer

Audio-Technica

Audio-Technica BP892xCW Manual

13 Januar 2025
Audio-Technica

Audio-Technica ATGM2 Manual

6 December 2024
Audio-Technica

Audio-Technica Creator Pack Manual

6 December 2024
Audio-Technica

Audio-Technica AT2040 Manual

6 December 2024
Audio-Technica

Audio-Technica AE2500 Manual

6 December 2024
Audio-Technica

Audio-Technica AT881TH/RC Manual

6 December 2024
Audio-Technica

Audio-Technica AT882TH Manual

6 December 2024
Audio-Technica

Audio-Technica AT882TH/D3RC5 Manual

6 December 2024
Audio-Technica

Audio-Technica AT4033a Manual

6 December 2024
Audio-Technica

Audio-Technica AT2020USB+V Manual

6 December 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

BOYA

BOYA BY-PM700 Manual

14 Januar 2025
DJI

DJI Mic Mini Manual

14 Januar 2025
Sound Devices

Sound Devices Astral A20-HH Manual

13 Januar 2025
HyperX

HyperX QuadCast S Manual

12 Januar 2025
Monacor

Monacor ECM-306BU/SW Manual

12 Januar 2025
Electro-Voice

Electro-Voice WSPL-1 Manual

12 Januar 2025
Schertler

Schertler STAT-C Manual

11 Januar 2025
AKG

AKG GN50 M Manual

10 Januar 2025
Godox

Godox Cube-C Manual

6 Januar 2025
Vonyx

Vonyx WAT200 Manual

5 Januar 2025