Audio-Technica AT875R Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica AT875R (2 sider) i kategorien Microfoon. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
LINE + GRADIENT CONDENSER MICROPHONE
- Designed for video production and broadcast (ENG/EFP)
audio acquisition
- Extremely short length (175mm) ideal for use with compact
digital cameras
- Provides the narrow acceptance angle desirable for long-
distance sound pickup
- Excellent sound rejection from the sides and rear of mic
- Tailored response minimizes camera and handling noise
- Operates on phantom power only
The AT875R requires 11V to 52V DC phantom power for
operation.
Output from the microphone’s XLRM-type connector is low
impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”
positive acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables
must be wired consistently: Pin 1-to-Pin 1, etc.
The high sensitivity of the AT875R assures useful output and
an excellent match to most input sources. In some cases,
however, an attenuator such as the Audio-Technica AT8202
may be required between the microphone and preamplier to
avoid overloading sensitive input stages.
The microphone is RoHS compliant–free from all substances
specied in the EU directive on hazardous substances.
Avoid leaving the microphone in the open sun or in areas
where temperatures exceed 43°C for extended periods.
Extremely high humidity should also be avoided.
FORM No. ATGC-L0120-07-E
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
same as 1 kHz
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Line + gradient
FREQUENCY RESPONSE 90-20,000 Hz
OPEN CIRCUIT SENSITIVITY -30 dB (31.6 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 127 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 107 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIRMENTS 11 - 52V DC, 2 mA typical
WEIGHT (less cable and accessories) 80 g
DIMENSIONS 175.0 mm long,
21.0 mm diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for ⅝"-27
threaded stands;
⅝"-27 to ⅜"-16 threaded adapter;
windscreen;
protective carrying case


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Microfoon
Model: AT875R

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica AT875R stil et spørgsmål nedenfor, og andre brugere vil svare dig




Microfoon Audio-Technica Manualer

Microfoon Manualer

Nyeste Microfoon Manualer

Audac

Audac APM116MK2 Manual

1 Oktober 2024
Vonyx

Vonyx CMC200 Manual

30 September 2024
Auna

Auna MIC-920B Manual

30 September 2024
AKG

AKG D5 CS Manual

29 September 2024
BOYA

BOYA BY-PM700 PRO Manual

29 September 2024
Vonyx

Vonyx VX1800S Manual

28 September 2024