Audio-Technica AT882TL/SS Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica AT882TL/SS (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 58 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Description
The AT882TL/SS requires a phantom power supply of 11–52V DC for each element. Output is low-
impedance balanced. The balanced signal appears across Pins 2 and 3, while the ground (shield)
connection is Pin 1. Output is phased so that positive acoustic pressure produces positive voltage
at Pin 2, in accordance with industry convention.
Each of the elements in the microphone is shock mounted. The Line-cardioid polar pattern of the
elements provides a 90°angle of acceptance. The AT882TL/SS is designed with integral wind-
screens to ensure maximum security against wind noise and plosives.
The microphone features a rubber switch that toggles between on/mute in Channel A (red
output), and a LED indicator that displays On status. This switch does not affect the output of
Channel B.
The microphone is enclosed in a sturdy metal housing with a low-reflectance black finish. Its base
is a desk stand that connected with a 2 meter splitter cable, which terminates in two 3-pin XLRM-
type connectors, for in-house and remote feeds.
The AT882TL/SS is intended for use on a flat surface. The 2 meter splitter cable terminates in two
3-pin XLRM-type connectors, which can be connected to in-house and/or remote feeds. Connect
the red output (Channel A) to the primary in-house feed. Connect the gray output (Channel B) to
the remote feed.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for
extended periods. Extremely high humidity should also be avoided.
Features
Designed for quality sound reinforcement in demanding situations, especially those
requiring separate miking for PA and broadcast.
Dual-element Line-cardioid condenser microphone with two independent power
module.
A rubber switch with LED allows users to easily mute/un-mute the Channel A (red
output) signal of microphone.
Circuit grounds for each channel are completely isolated, greatly reducing the potential
for hum.
Integral windscreens ensure ultimate security against wind noise and plosives.
Sturdy metal housing design with ball-in-socket base permits flexible positioning.
Heavy die-cast case and rubber bottom pads minimize coupling of surface vibration to
the microphones.
Specifications
Element Dual back electret condenser
Polar pattern Line-cardioid (Unidirectional)
Frequency response 20-20,000 Hz
Open circuit sensitivity -31 dB (28.2 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum input sound level 126 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise ratio >69 dB, 1 kHz at 1 Pa
Phantom power requirements 11-52V DC, 2 mA typical
Switch Push button control: Channel A on/mute
Weight 1.22 kg
Dimensions 214 mm - long,
227 mm - Max. height,
102 mm - Width
Cable 2 m long, vinyl-jacketed stereo cable
Output connector Two 3-pin XLRM-type
polar pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency response
Frequency in Hertz
Response in dB
12” or more on axis
Audio-Technica Corp. Machida Tokyo Japan 2018 NOV FORM No. ATGC-L0362-18-E
Optional Accessories:
AT8201 line matching transformer (Lo-z to
50,000 ohms)
AT8202 adjustable in-line attenuator for use
with low-impedance microphones.
AT8506 four-channel 48V phantom power
supply (AC powered).
Dual-element Line-cardioid Condenser Microphone (with Single channel Switch and LED)
AT882TL/SS


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Mikrofon
Model: AT882TL/SS

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica AT882TL/SS stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Audio-Technica Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer

PSC

PSC RF Multi SMA Manual

17 December 2024
PSC

PSC PowerStar RF Manual

17 December 2024
Hollyland

Hollyland LARK M1 Manual

16 December 2024
Power Dynamics

Power Dynamics PD210 Manual

16 December 2024
Vimar

Vimar 20586 Manual

15 December 2024
Vimar

Vimar 19586.M Manual

15 December 2024
Vimar

Vimar 20586.B Manual

15 December 2024
Vimar

Vimar 20586.N Manual

15 December 2024
Vimar

Vimar 19586 Manual

15 December 2024
Vimar

Vimar 19586.B Manual

15 December 2024