Audio-Technica ATM-450 Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica ATM-450 (7 sider) i kategorien Mikrofon. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/7
artist series live sound microphones
ATM450
Cardioid Condenser Instrument Microphone
Features
Uncompromising sound quality for overheads, percussion,
acoustic guitar, strings and other acoustic instruments
Unique side-address stick design maximizes placement options
with minimal obstructions
Cardioid polar pattern reduces pickup of sounds from the sides
and rear, improving isolation of desired sound source
Rugged all-metal design and construction for years of trouble
free use
Isolation clamp provides secure mounting, versatile positioning,
and effective dampening of unwanted mechanical noise
Integral 80 Hz high-pass lter switch and 10 dB pad switch
Description
The ATM450 is a xed-charge condenser microphone with a cardioid
polar pattern. It is designed specically for use on overheads, percussion,
acoustic guitar, strings and other acoustic instruments in professional
live-sound and studio applications.
The microphone requires 11V to 52V phantom power for operation.
The cardioid polar pattern of the microphone is more sensitive to sound
originating directly in front of the element, making it useful for controlling
feedback and reducing pickup of unwanted sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is equipped with a switchable 10 dB pad and a switch
that permits choice of at response or low-frequency roll-off (via integral
80 Hz high-pass lter).
The microphone is enclosed in a rugged housing. The included AT8471
isolation clamp permits mounting on any microphone stand with 5/8"-27
threads. A windscreen and a soft protective pouch are also included.
Operation and Maintenance
The ATM450 requires 11V to 52V phantom power for operation.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
An integral 80 Hz high-pass lter provides easy switching from a at
frequency response to a low-end roll-off. The roll-off position reduces
the pickup of low-frequency ambient noise (such as trafc, air-handling
systems, etc.), room reverberation and mechanically coupled vibrations.
To engage the high-pass lter, use the end tip of a paperclip or other
small pointed instrument to slide the switch toward the “bent” line.
The microphone is also equipped with a switchable 10 dB pad that
lowers the microphone’s sensitivity, thus providing higher SPL capability
for exible use with a wide range of users and system congurations.
To engage the 10 dB pad, use the end tip of a paperclip or other small
pointed instrument to slide the switch toward the -10 position.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods. Extremely high
humidity should also be avoided.


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Mikrofon
Model: ATM-450

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica ATM-450 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Audio-Technica Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer

Shure

Shure MoveMic Manual

17 November 2024
Comica

Comica DUAL.LAV D03 Manual

17 November 2024
BOYA

BOYA BY-PM500W Manual

17 November 2024
Elgato

Elgato Wave Panels Manual

16 November 2024
Warm Audio

Warm Audio WA-8000 Manual

15 November 2024
Pyle

Pyle PDWM3100 Manual

15 November 2024
Behringer

Behringer TM1 Manual

15 November 2024
Yamaha

Yamaha RM-WCH-8 Manual

14 November 2024
Yamaha

Yamaha RM-WOH Manual

14 November 2024