Audio-Technica BP896 Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica BP896 (2 sider) i kategorien Microfoon. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
BP896 / BP896-TH
MicroSet® Omnidirectional Condenser Lavalier Microphones
Features
BP896 Description
The BP896 is a subminiature clip-on/lavalier condenser microphone with an
omnidirectional polar pattern. It is designed to provide intelligible, natural audio for
stage/television talent, lecturers and houses of worship.
The microphone is intended to be worn on the clothing or hidden in props for excellent
yet unobtrusive sound pickup. The wide-range capability of the microphone ensures
clean, accurate reproduction with high intelligibility for speakers, presenters and
other performers. Its small size makes it ideal for use in applications where minimum
visibility is required.
The microphone requires 11V to 52V phantom power for operation.
The microphone includes a 1.4 m permanently attached miniature cable. Its free end
connects to the provided AT8539 power module via a locking 4-pin connector. The
connector is also compatible with all Audio-Technica UniPak® body-pack transmitters.
The output of the power module is a 3-pin XLRM-type connector.
A recessed switch in the power module permits choice of flat response or low-
frequency roll-off (via integral 80 Hz high-pass UniSteep® filter) to help control
undesired ambient noise.
The microphone comes equipped with a power module, a clothing clip base, a viper
clip base, three single mic holders, two double mic holders, two windscreens and six
element covers (two each in black, white and beige) for blending in with users’ attire. A
protective carrying case is also included. The microphone is available in black and beige.
Wireless MicroSet® Description
The microphone is also available in a variety of wireless models, including the
BP896cW. The BP896cW includes a 1.4 m permanently attached miniature cable
terminated with a locking 4-pin connector for use with Audio-Technica UniPak® body-
pack transmitters. Models are also available in a variety of terminations for use with
many other manufacturers’ wireless systems. No power module or belt clip is included
(or required) with the wireless models. The wireless modelsdimensions, polar pattern
and included accessories are otherwise identical to those of the BP896.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed
43° C for extended periods. Extremely high humidity should also be avoided.
Specifications
Element Fixed-charge back plate, permanently
polarized condenser
Polar pattern Omnidirectional
Frequency response 20-20,000 Hz
Low frequency roll-off 80 Hz, 18 dB/octave (wired only)
Open circuit sensitivity 49 dB (3.5 mV) re 1V at 1 Pa
Impedance 250 ohms (wired only)
Maximum input sound level 135 dB SPL, 1 kHz at 3% T.H.D.
Dynamic range (typical) 104 dB, 1 kHz at Max SPL (wired only)
Signal-to-noise radio 63 dB, 1 kHz at 1 Pa
Phantom power requirements 11-52V DC, 2 mA typical (wired only)
Current consumption 0.1 mA typical at 5V (wireless only)
Voltage range 2.5-11V (wireless only)
Switch Flat, roll-off (wired only)
Weight Microphone (less cable): 0.14 g
Power module (wired only): 85 g
Dimensions Microphone: 10.8 mm long, 2.6 mm diameter
Power module: 97.6 mm long, 18.9 mm diameter
Output connector (power module) Integral 3-pin XLRM-type
Cable 1.4 m long (permanently attached to microphone),
1.6 mm diameter, 2-conductor shielded cable with
locking 4-pin connector (wired only)
Accessories furnished AT8539 power module (wired only); AT8517
windscreens; six element covers (2 white, 2 beige, 2
black); viper clip base; clothing clip base; 3 single mic
holders; 2 double mic holders; carrying case
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
frequency response: 20–20,000 Hz polar pattern
Frequency in Hertz
LEGEND
Response in dB
12" or more on axis
Roll-off SCALE IS 5 DECIBELS PER DIVISION
Cable Terminations
BP896cW, BP896cW-TH Terminated with locking 4-pin connector for use with A-T UniPak
® body-pack transmitters
BP896cL4, BP896cL4-TH Terminated for Sennheiser
® wireless systems using Lemo
® connector
BP896cLM3, BP896cLM3-TH Terminated for Sennheiser
® wireless systems using locking 3.5 mm connector
BP896cT4, BP896cT4-TH Terminated for Shure
® wireless systems using TA4F-type connector
BP896cT5, BP896cT5-TH Terminated for Lectrosonics
® wireless systems using TA5F-type connector
BP896c, BP896c-TH Unterminated
Audio-Technica® is a registered trademark of Audio-Technica. Other product and company names mentioned herein may
be trademarks and/or service marks of their respective owners.
1
2
3
4
1
4
3
2
Tip
Ring
Sleeve
1
5
4
32
1
23
Pin 1 Pin 2 Pin 3 Pin 4
Function Ground / Shield Instrument Mic Audio Blas + In
Wire Colour Green Jumper to Pin 1 Copper Colour Red
Pin 1 Pin 2 Pin 3 Pin 4
Function Ground / Shield Blas + In Mic Audio Source Load
Wire Colour Green Red Copper Colour Jumper to Pin 1
Pin 1 Pin 2 Pin 3 Pin 4 Pin 5
Function Ground / Shield Blas + In Mic Audio Source Load Line In
Wire Colour Green Red Copper Colour Jumper to Pin 1 Open
Pin 1 Pin 2 Pin 3 Shell / Case
Function N/C N/C Blas + In, Mic Audio Ground / Shield
Wire Colour Open Open Red Green
Sleeve Ring Tip
Function Ground / Shield Mic Audio Blas + In
Wire Colour Green Copper Colour Red
FORM No. ATGC-L0166-10-E
Machida Tokyo Japan


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Microfoon
Model: BP896

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica BP896 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Microfoon Audio-Technica Manualer

Microfoon Manualer

Nyeste Microfoon Manualer

Vonyx

Vonyx CMC200 Manual

30 September 2024
Auna

Auna MIC-920B Manual

30 September 2024
AKG

AKG D5 CS Manual

29 September 2024
BOYA

BOYA BY-PM700 PRO Manual

29 September 2024
Vonyx

Vonyx VX1800S Manual

28 September 2024
Qtx

Qtx U-MIC-864.8-L Manual

28 September 2024
Reloop

Reloop sPodcaster Go Manual

27 September 2024
Krom

Krom Kyp Manual

23 September 2024
APart

APart MICPAT-2 Manual

23 September 2024