Audio-Technica BPHS1 headset Manual

Audio-Technica Hovedtelefon BPHS1 headset

Læs nedenfor 📖 manual på dansk for Audio-Technica BPHS1 headset (4 sider) i kategorien Hovedtelefon. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

broadcast & production microphones

BPHS1

Broadcast Stereo Headset

Features

• Microphonefeaturespolarpatternandfrequencyresponsetailored

 fornatural,highlyintelligiblevocalreproduction

• Closed-backcircumauralearcupshelpsealoutcrowdnoiseand

 otherbackgrounddistractions

• Neodymiummagnetsinmicrophoneandheadphonesforhigh

 outputlevel&detailedsoundreproduction

• Ruggeddesignwithuser-replaceablecableandearpads

• Cardioidpickuppatternofthedynamicmicrophonerejects

 off-axissounds

• Boom-mountedmicrophonecanbepositionedontheleftorrightside

• Adjustablecushionedheadbandandlightweightdesignforlong-

 wearingcomfort

• Cableterminations:

 -3-pinXLRM-typeconnectorformicrophone

 -¼"3-conductorforheadphones

Description

The BPHS1 is a rugged broadcast stereo headset with closed-back

circumaural (around-the-ear) ear cups and a professional boom-mounted

microphone that can be worn on either side. It is designed for news and

sports broadcasting, announcing and interviews.

The headset’s microphone has a cardioid polar pattern tailored for pickup of

speech with maximum voice intelligibility over a wide range of frequencies.

It is more sensitive to sound originating directly in front of the element,

making it useful in reducing pickup of unwanted sounds. The exible

gooseneck boom swivels for easy positioning on either the right or left side.

The dual earphones offer an extended frequency response of 20-20,000 Hz

and smooth, natural sound reproduction. At the heart of each earpiece,

a 40 mm neodymium driver offers impressive power handling for high

maximum sound pressure levels. Generously padded circumaural ear

cups provide acoustic isolation and long-wearing comfort; the adjustable

headband is also crafted and cushioned for listening comfort.

The headset includes a user-replaceable detachable 3.3 m (10.8') cable

terminating in two output connectors, one each for the microphone and

headphone: the microphone output is a 3-pin XLRM-type connector; the

headphones’ output is a 3-conductor ¼" connector. Three windscreens are

also included to protect against noise from breath and wind.

Operation & Maintenance

The BPHS1 broadcast headset features a exible microphone boom

that pivots so that it can be worn on either side of the face. Put on the

headset with the microphone boom on the desired side. (Note: For stereo

monitoring, the earphone with a red insert on the yoke assembly carries

the right stereo channel.) Adjust the boom as needed to follow the contour

of your face, positioning the microphone near the corner of your mouth.

Experiment with placement for optimal performance: Positioning the

microphone closer to your mouth will increase the low-end response for

a more robust, full-range sound. As you move the microphone away from

your mouth, the low-end response will diminish.

To remove included 3.3 m (10.8') shielded cable, loosen and remove the

thumb screw and pull the multi-pin connector out of its socket. To replace

the cable, plug the multi-pin connector into the socket, replace and tighten

the thumb screw.

The cable features a standard 3-pin XLRM-type microphone output

connector and a ¼" headphone output connector. Output from the

microphone’s XLRM-type connector is low impedance (Lo-Z) balanced.

The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output

phase is “Pin 2 hot”– positive acoustic pressure produces positive voltage

at Pin 2. The headphone ¼" connector is wired for stereo operation: the end

portion of the connector (Tip) carries the left channel; the center portion (Ring)

carries the right channel; and the bottom portion (Sleeve) carries the ground.

Take care to keep foreign particles from entering the windscreen. An

accumulation of iron or steel lings on the diaphragm, and/or foreign

material in the windscreen’s mesh surface, can degrade performance.

Architect’s and Engineer’s Specications

The headset shall be a stereo broadcast headset with closed-back ear

cups and a boom-mounted microphone that can be positioned on the

left or right side.

Padded circumaural ear cups shall provide acoustic isolation; the headband

shall be adjustable and cushioned. The earphones shall have an extended

frequency response of 20 Hz to 20,000 Hz, and shall be equipped with

40 mm neodymium drivers.

The microphone shall be a moving coil dynamic with a neodymium magnet.

It shall have a cardioid polar pattern and a frequency response of 40 Hz to

20,000 Hz. Nominal open-circuit output voltage shall be 1.4 mV at 1V, 1

Pascal. Output shall be low impedance balanced (560 ohms). The boom

shall be of a pivoting, exible design.

The headset shall have a 3.3 m (10.8') user-replaceable detachable cable

terminating in two output connectors, one each for the microphone

and headphone. The output of the microphone shall be a 3-pin XLRM-

type connector. The output of the headphone shall be a 3-conductor ¼"

connector.

Weight shall be 264 g (9.3 oz). It shall include three windscreens. Finish

shall be low-reectance black.

The Audio-Technica BPHS1 is specied.

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Hovedtelefon
Model:	BPHS1 headset
Brugervejledning:	Ja
Produktfarve:	Sort
Produkttype:	Headset
Antal:	1
Impedens:	65 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Bæremåde:	Headset
Headset type:	Binaural
Hovedtelefon frekvens:	20 - 20000 Hz
Hovedtelefon følsomhed:	100 dB
Driverenhed:	40 mm
Plug and play:	Ja
Mikrofonindgangsimpedans:	560 ohm (Ω)
Mikrofon frekvens:	40 - 20000 Hz
Mikrofon sensitivitet:	-57 dB
Ørekobling:	Circumaural
Magnet-type:	Neodym
Akustisk system:	Lukket
Tilslutning af mikrofon:	6,3 mm
Støjreducerende mikrofon:	Ja