Audio-Technica ES935H6 Manual

Audio-Technica Mikrofon ES935H6

Læs nedenfor 📖 manual på dansk for Audio-Technica ES935H6 (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
HYPERCARDIOID CONDENSER GOOSENECK MICROPHONE
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Optional Accessories:
AT8474 universal isolation mount.
AT8473 quick-mount stand adapter.
AT8506 four-channel 48V phantom
power supply (AC powered).
AT8668 quick-mount plug-in micro-
phone desk stand.
AT8801/EU single-channel 48V
phantom power supply (AC pow-
ered).
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Roll-off
Response in dB
FORM No. ATGC-L0097-07-E
Machida • Tokyo • Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN Hypercardioid
FREQUENCY RESPONSE 80-20,000 Hz
LOW-FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -40 dB (10.0 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 138 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 109 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1Pa
SWITCHES Flat, roll-off
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
WEIGHT 104 g
DIMENSIONS 197.3 mm - long
8.4 mm - head diameter,
18.9 mm - base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8109 two-stage foam windscreen
OPTIONAL INTERCHANGEABLE
ELEMENTS
ESE-O omnidirectional (360°)
ESE-C cardioid (120°)
ESE-ML MicroLine ® (90°)
ES935H6 is a wide-range miniature
c o n d e n s e r m i c r o p h o n e w i t h a
h y p e r c a r d i o i d p o l a r p a t t e r n . I t
i s d e s i g n e d fo r q u a l i t y s o u n d
reinforcement, professional recording,
elevision and other demanding sound
pickup applications. The small-diameter
gooseneck design permits highly exible
positioning while maintaining a smooth,
well-contoured appearance. An included
snap-on foam windscreen effectively
reduces wind noise and “popping.”
T h e E S 9 3 5 H 6 i s e q u i p p e d w i t h
UniGuard® RFI-shielding technology,
which offers outstanding rejection of
radio frequency interference (RFI). The
microphone is RoHS compliant – free
from all substances specied in the EU
directive on hazardous substances.
T he m i c ro p h on e 's h y p er c a rd i o id
polar pattern provides a 100° angle of
acceptance. Additional interchangeable
elements with omnidirectional (360°),
cardioid (120°) and MicroLine® (90°)
pickup patterns are available.
The integral power module can be powered from any external 11V
to 52V DC phantom power supply. A recessed switch in the power
module permits choice of at response or low-frequency roll-off (via
integral 80 Hz high-pass UniSteep® lter) to help control undesired
ambient noise.
The microphone is enclosed in a rugged housing with a low-
reectance black nish. It features an XLRM-type connector insert at
its base, allowing it to be plugged directly into an XLRF-type panel
jack or microphone cable. An AT8474 low-prole isolation mount or
AT8473 stand clamp is optional to permit attachment of the XLR mic
base to a standard ⅝"-27 or ⅜"-16 threaded mic stand or mounting
ange.
The ES935H6 stands 197.3 mm from the table or podium. The model
output is low impedance balanced. The output connector mates with
XLRF-type cable connectors. The balanced signal appears across
Pins 2 and 3, while the ground (shield) connection is Pin 1. Output is
phased so that positive acoustic pressure produces positive voltage
at Pin 2, in accordance with industry convention.
The integral 80 Hz high-pass UniSteep® filter prov ides easy
switching from a flat frequency response to a low-end roll-off. The
roll-off position reduces the pickup of low-frequency ambient noise
(such as traffic, airhandling systems, etc.), room reverberation and
mechanically coupled vibrations. To engage the UniSteep® lter, use
the end tip of a paperclip or other small pointed instrument to slide
the switch toward the “bent” line.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43°C for extended periods. Extremely high
humidity should also be avoided.

Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Mikrofon
Model: ES935H6

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica ES935H6 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrofon Audio-Technica Manualer

Audio-Technica

Audio-Technica ATGM2 Manual

6 December 2024
Audio-Technica

Audio-Technica Creator Pack Manual

6 December 2024
Audio-Technica

Audio-Technica AT2040 Manual

6 December 2024
Audio-Technica

Audio-Technica AE2500 Manual

6 December 2024
Audio-Technica

Audio-Technica AT881TH/RC Manual

6 December 2024
Audio-Technica

Audio-Technica AT882TH Manual

6 December 2024
Audio-Technica

Audio-Technica AT882TH/D3RC5 Manual

6 December 2024
Audio-Technica

Audio-Technica AT4033a Manual

6 December 2024
Audio-Technica

Audio-Technica AT2020USB+V Manual

6 December 2024
Audio-Technica

Audio-Technica AT2020TYO Manual

6 December 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

PSC

PSC RF Multi SMA Manual

17 December 2024
PSC

PSC PowerStar RF Manual

17 December 2024
Hollyland

Hollyland LARK M1 Manual

16 December 2024
Power Dynamics

Power Dynamics PD210 Manual

16 December 2024
Vimar

Vimar 20586 Manual

15 December 2024
Vimar

Vimar 19586.M Manual

15 December 2024
Vimar

Vimar 20586.B Manual

15 December 2024
Vimar

Vimar 20586.N Manual

15 December 2024
Vimar

Vimar 19586 Manual

15 December 2024
Vimar

Vimar 19586.B Manual

15 December 2024