Audio-Technica ES935SML6 Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica ES935SML6 (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 47 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
MICROLINE® CONDENSER GOOSENECK MICROPHONE with Mute Switch / LED
10 dB
20k10k5k2k1k50020010050
8 kHz
200 Hz
1 kHz
5 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Optional Accessories:
AT8474 universal isolation mount.
AT8473 quick-mount stand adapter.
AT8506 four-channel 48V phantom
power supply (AC powered).
AT8668 quick-mount plug-in micro-
phone desk stand.
AT8801/EU single-channel 48V
phantom power supply (AC pow-
ered).
Polar Pattern
Frequency Response
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
Frequency in Hertz
LEGEND 12” or more on axis
Roll-off
Response in dB
FORM No. ATGC-L0101-07-E
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Fixed-charge back plate
permanently polarized condenser
POLAR PATTERN MicroLine®
FREQUENCY RESPONSE 30-20,000 Hz
LOW-FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY -35 dB (17.7 mV) re 1V at 1 Pa
IMPEDANCE 250 ohms
MAXIMUM INPUT SOUND LEVEL 133 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 109 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1Pa
SWITCHES Flat, roll-off; mute/on
PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
WEIGHT 108 g
DIMENSIONS 316.3 mm - long
8.0 mm - head diameter,
18.9 mm - base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8138 MicroLine foam windscreen
OPTIONAL INTERCHANGEABLE
ELEMENTS
ESE-O omnidirectional (360°)
ESE-C cardioid (120°)
ESE-H hypercardioid (100°)
E S 9 3 5 S M L 6 i s a w i d e - r a n g e
miniature condenser microphone with
a MicroLine® polar pattern and an
integral mute switch/LED. It is designed
for qual ity s ound reinforcem ent,
professional recording, elevision
and other demanding sound pickup
applications. The small-diameter
gooseneck design permits highly
flexible positioning while maintaining
a smooth, wellcontoured appearance.
An included snap-on foam windscreen
effectively reduces wind noise and
“popping.”
The ES935SML6 is equipped with
UniGuard® RFI-shielding technology,
which offers outstanding rejection of
radio frequency interference (RFI). The
microphone is RoHS compliant free
from all substances specied in the EU
directive on hazardous substances.
The microphone's MicroLine
® polar pattern
provides a 9 angle of acceptance.
Additional interchangeable elements
with omnidirectional (360°), cardioid
(120°) and hypercardioid (100°) pickup
patterns are available.
The integral power module can be powered from any external 11V
to 52V DC phantom power supply. A recessed switch in the power
module permits choice of at response or low-frequency roll-off (via
integral 80 Hz high-pass UniSteep® lter) to help control undesired
ambient noise. A mute switch in the base lights when the mic is "on".
The switch is designed to operate quietly without any mechanical
noise.
The microphone is enclosed in a rugged housing with a low-
reectance black nish. It features an XLRM-type connector insert at
its base, allowing it to be plugged directly into an XLRF-type panel
jack or microphone cable. An AT8474 low-prole isolation mount or
AT8473 stand clamp is optional to permit attachment of the XLR mic
base to a standard ⅝"-27 or ⅜"-16 threaded mic stand or mounting
ange.
The ES935SML6 stands 316.3 mm from the table or podium. The
model output is low impedance balanced. The output connector
mates with XLRF-type cable connectors. The balanced signal
appears across Pins 2 and 3, while the ground (shield) connection is
Pin 1. Output is phased so that positive acoustic pressure produces
positive voltage at Pin 2, in accordance with industry convention.
The integral 80 Hz high-pass UniSteep® filter provides easy
switching from a flat frequency response to a low-end roll-off. The
roll-off position reduces the pickup of low-frequency ambient noise
(such as traffic, airhandling systems, etc.), room reverberation and
mechanically coupled vibrations. To engage the UniSteep® lter, use
the end tip of a paperclip or other small pointed instrument to slide
the switch toward the “bent” line.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43°C for extended periods. Extremely high
humidity should also be avoided.


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Mikrofon
Model: ES935SML6

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica ES935SML6 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Audio-Technica Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer

Shure

Shure MoveMic Manual

17 November 2024
Comica

Comica DUAL.LAV D03 Manual

17 November 2024
BOYA

BOYA BY-PM500W Manual

17 November 2024
Elgato

Elgato Wave Panels Manual

16 November 2024
Warm Audio

Warm Audio WA-8000 Manual

15 November 2024
Pyle

Pyle PDWM3100 Manual

15 November 2024
Behringer

Behringer TM1 Manual

15 November 2024
Yamaha

Yamaha RM-WCH-8 Manual

14 November 2024
Yamaha

Yamaha RM-WOH Manual

14 November 2024