Audio-Technica Pro 92cW Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica Pro 92cW (1 sider) i kategorien Mikrofon. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
pro series microphones
PRO 92cW & PRO 92cW-TH
Omnidirectional Condenser Wireless Headworn Microphones
Features
Designed for lecturers, presenters, houses of worship and other
applications requiring clear, articulate vocal reproduction
Flexible, contoured loop hooks over either ear for a comfortable t
Natural, smooth frequency response optimized for vocal
reproduction
Rugged construction designed to meet the challenges of day-to-
day use
Offered in black and beige (-TH) models
Terminated for use with all Audio-Technica UniPak® wireless
systems
Description
The PRO 92cW is a headworn condenser microphone with an
omnidirectional polar pattern. It is designed to provide articulate vocal
reproduction for lecturers, presenters and houses of worship.
The microphone includes a 1.4 m (55") permanently attached miniature
cable. Its free end terminates in a locking 4-pin connector for use with
Audio-Technica UniPak® body-pack transmitters.
The microphone comes equipped with a windscreen, a cable clip and a
carrying pouch. The microphone is available in black and beige.
Operation and Maintenance
The exible design of the PRO 92cW enables it to be worn on either
the left or right ear. Position the lightweight contoured earpiece around
your ear, so that the boom extends from the top of your ear. Remove the
PRO 92cW and bend a gentle curve in the microphones boom to follow the
contour of your face. Again, hook the earpiece around your ear, adjusting the
earpiece and boom as needed to achieve a secure, comfortable t, so that
the microphone is not dislodged by shaking your head.
A cable clip is provided for strain relief, allowing the microphone to
remain securely in place without the weight of the cable pulling on the
headset. To install the cable clip, slip the cable into the snap-on connector
and attach the clip to clothing, leaving enough slack on the microphone
side of the clip to allow for free, comfortable motion.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 110° F (43° C) for extended periods. Extremely high
humidity should also be avoided.
Architect’s and Engineer’s Specications
The microphone shall be a xed-charge condenser designed for
headworn use. It shall have an omnidirectional polar pattern and a
frequency response of 20 Hz to 20,000 Hz. It shall be capable of handling
sound input levels up to 116 dB. Nominal open-circuit output voltage shall
be 5.6 mV at 1V, 1 Pascal.
The microphone shall have a 1.4 m (55") permanently attached miniature
cable terminating in a locking 4-pin output connector for use with
Audio-Technica UniPak® body-pack transmitters.
The microphone shall be a headworn design with an element diameter of
9.2 mm (0.36"). Microphone and boom weight shall be 4 grams (0.14 oz).
The microphone shall include a cable clip, a windscreen and a carrying
pouch. Finish shall be black [beige].
The Audio-Technica PRO 92cW [PRO 92cW-TH] is specied.
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com 0001-0163-01
Specications
Function
Pin 1 Ground/Shield
Pin 2 Instrument
Pin 3 Mic Audio
Pin 4 Bias + In
cW, cW-TH
Condenser
Omnidirectional
20-20,000 Hz
–45 dB (5.6 mV) re 1V at 1 Pa
116 dB SPL, 1 kHz at 1% T.H.D.
60 dB, 1 kHz at 1 Pa
0.3 mA typical at 5V
1.5-9V
Microphone & boom: 4 g (0.14 oz)
Microphone, boom, connector & cable:
24 g (0.84 oz)
Microphone: 21.7 mm (0.85") long,
9.2 mm (0.36") diameter
Boom: 110.0 mm (4.33") long,
2.4 mm (0.09") boom diameter
1.4 m (55") terminated with locking 4-pin
connector for use with A-T UniPak®
body-pack transmitters
M38
AT8442 cable clip; AT8158 windscreen;
carrying pouch
Element
Polar pattern
Frequency response
Open circuit sensitivity
Maximum input sound level
Signal-to-noise ratio1
Current Consumption
Voltage Range
Weight
Dimensions
Cable
Audio-Technica case style
Accessories furnished
In the interest of standards development, A.T.U.S.
offers full details on its test methods to other industry
professionals on request.
1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
1 Typical, A-weighted, using Audio Precision System One.
Specications are subject to change without notice.
LEGEND
200 Hz
1 kHz
5 kHz
8 kHzSCALE IS 5 DECIBELS PER DIVISION
240˚
180˚
210˚
270˚
300˚
330˚
150˚
120˚
90˚
30˚
60˚
12" or more on axisLEGEND
Frequency in Hertz
Response in dB
10 dB
100
50 200 10k5k1k500 2k 20k
Roll-off
frequency response: 2020,000 Hz
polar pattern


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Mikrofon
Model: Pro 92cW

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica Pro 92cW stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Audio-Technica Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer

Shure

Shure MoveMic Manual

17 November 2024
Comica

Comica DUAL.LAV D03 Manual

17 November 2024
BOYA

BOYA BY-PM500W Manual

17 November 2024
Elgato

Elgato Wave Panels Manual

16 November 2024
Warm Audio

Warm Audio WA-8000 Manual

15 November 2024
Pyle

Pyle PDWM3100 Manual

15 November 2024
Behringer

Behringer TM1 Manual

15 November 2024
Yamaha

Yamaha RM-WCH-8 Manual

14 November 2024
Yamaha

Yamaha RM-WOH Manual

14 November 2024