Audio-Technica XM5S Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica XM5S (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
UNIDIRECTIONAL DYNAMIC MICROPHONE
Audio-Technica’s Xtreme Series are high-output design, excellent
sound and rugged, all-metal construction, this totally redesigned
series creates a new standard in affordable vocal microphones.
There are four models - X M1S, XM3S, XM5S and XM5S-SV in Xtreme
Series.
- High-output design for vocals that cut through the mix.
- Unidirectional dynamic element design.
- XM3S microphone is tailored frequency response, also used for
optimal instrument reproduction.
- XM5S microphone is extended frequency response for optimal vocal
reproduction.
- XM5S-SV microphone is nished with silver colour plated, for
dazzlingly exhibit on the stage.
- Corrosion-resistant contacts from gold-plated XLRM-type
connectors.
- Rugged all-metal construction for reliable performance.
- Cardioid polar pattern reduces pickup of sounds from the sides and
rear, improving isolation of desired sound source.
Output from the microphones XLRM-type connector is low
impedance (Lo-Z) unbalanced. The signal appears across Pins 2; Pin
1 is ground (shield). Output phase is “Pin 2 hot” positive acoustic
pressure produces positive voltage at Pin 2.
Plug Type Ground Audio “+”
XLR Pin 1 / Pin 3 Pin 2
6.3mm TS Sleeve Tip
To avoid phase cancellation and poor sound, all mic cables must
be wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance
(Hi-Z) mic input, connect a Lo-Z balanced cable to a Hi-Z matching
transformer (A-T CP8201 or equal) at the equipment input.
When using the microphone in settings with a stage monitor speaker,
the speaker should be located 135° off axis (45° off the rear of the
microphone). This placement, in conjunction with the microphone’s
uniform cardioid pickup pattern, will virtually eliminate the possibility
of undesired audio feedback.
Take care to keep foreign particles from entering the windscreen.
An accumulation of iron or steel filings on the diaphragm, and/or
foreign material in the windscreen’s mesh surface, can degrade
performance.
FORM No. ATGC-L0136-08-E
Machida Tokyo Japan
SPECIFICATIONS
ELEMENT Dynamic
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 80-15,000 Hz
75-15,000 Hz
60-18,000 Hz
OPEN CIRCUIT SENSITIVITY -53 dB (2.2 mV) re 1V at 1 Pa
-54 dB (1.9 mV) re 1V at 1 Pa
-54 dB (1.9 mV) re 1V at 1 Pa
IMPEDANCE 500 ohms
600 ohms
600 ohms
WEIGHT (less cable) 250 g
270 g
250 g
DIMENSIONS
169.0 mm - long, 52.0 mm - head diameter
169.0 mm - long, 42.0 mm - head diameter
167.0 mm - long, 50.0 mm - head diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
CABLE 5m cable with XLRF-type connector at
microphone and 6.3mm plug
ACCESSORIES FURNISHED Stand clamp for ⅝”-27 threaded stand;
⅝”-27 to ⅜”-16 threaded adapter
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB
1 kHz
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
Polar Pattern
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
Frequency Response
Frequency in Hertz
LEGEND 12” or more on axis
Response in dB


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Mikrofon
Model: XM5S

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica XM5S stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Audio-Technica Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer

PSC

PSC RF Multi SMA Manual

17 December 2024
PSC

PSC PowerStar RF Manual

17 December 2024
Hollyland

Hollyland LARK M1 Manual

16 December 2024
Power Dynamics

Power Dynamics PD210 Manual

16 December 2024
Vimar

Vimar 20586 Manual

15 December 2024
Vimar

Vimar 19586.M Manual

15 December 2024
Vimar

Vimar 20586.B Manual

15 December 2024
Vimar

Vimar 20586.N Manual

15 December 2024
Vimar

Vimar 19586 Manual

15 December 2024
Vimar

Vimar 19586.B Manual

15 December 2024