Britax-Römer Dualfix Manual

Britax-Römer Bilsæde Dualfix

Læs nedenfor 📖 manual på dansk for Britax-Römer Dualfix (2 sider) i kategorien Bilsæde. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

09 10

01 02

Please observe the instructions on the use of child restraint systems described

in your vehicle owner’s manual.

The seat may be used in all vehicles equipped with the ISOFIX anchoring

systems. Please consult your vehicle owner’s manual for information the seats

which are approved for child safety seats in the weight class 0-18 kg.

The fastening with ISOFIX and support leg is based on semiuniversal approval.

The seat may be used only in those vehicles cited in the enclosed vehicle type

list. This type list is constantly updated. The latest version can be obtained from

us or from www.britax.eu / www.roemer.eu.

You can use your child car seat as follows:

NEXT CHILD SAFETY SEATS

USE IN THE VEHICLE

PRODUCT OVERVIEW

Shoulder pads

Harness buckle

Headrest

Cover

ISOFIX insert guides

ISOFIX attachement points (car) Shoulder straps

ISOFIX indicators

Recline button

Adjustment strap

Adjusting button Release button

Fabric loop

Locking arms

Support leg

Support leg indicator

Adjustment buttons

To ensure the full protective effect of the child safety

seat:

• In the event of an accident with an impact speed above 10

km/h it is possible that the child safety seat may have been

damaged, but that the damage may not be immediately obvi

ous. In this case the child safety seat must be replaced.

Please dispose of it properly.

• Regularly check all important parts for damage. Make sure

that the mechanical components in particular are all in per-

fect working order.

• To prevent damage, ensure that the child safety seat does

not become jammed between hard objects (car door, seat

runners etc.).

• Always have the child safety seat checked if it has been

damaged (e.g. if it is dropped).

• Never lubricate or oil parts of the child seat.

• In order to properly protect your child, it is imperative that

you install and use the DUALFIX exactly as described in this

manual.

Please observe the waste disposal regulations in your country.

CARE INSTRUCTIONS

Disposal of packaging Container for cardboard

Cover Residual waste, thermal utilisation

Plastic parts In accordance with the labelling in the

designated container

Metal parts Container for metals

Harness straps Container for polyester

Buckle &latch Residual waste

In the direction of travel Yes

Against the direction of travel Yes

With 2 point or 3 point vehicle belt No

On seats featuring:

ISOFIX attachments (between seat surface and backrest) Yes 2)

1) In the direction of travel 9-18 kg / Against the direction of travel 0-18 kg

2) In the direction of travel 9-18 kg: if there is a front airbag: Slide the passenger seat a

long way back and refer to any instructions in vehicle owner’s manual.

Against the direction of travel 0-18 kg: DO NOT use on a passenger seat with a front

airbag!

(Please observe the applicable regulations in your country)

BRITAX RÖMER

child safety seat

Tested and certied ac-

cording to ECE* R 44/04

Group Body weight

DUALFIX 0+ & 1 0 to 18 kg

• -The child safety seat has been designed, tested and certied according to the requirements of the Euro

pean Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certica-

tion number are located on the orange certication sticker (sticker on the child safety seat).

• This certication will be invalidated if you make any modications to the child safety seat.

• The DUALFIX child safety seat must only be used to secure your child in the vehicle. It must never be

used as a seat or toy in the home.

• Risk of injury due to unauthorised modications! Unauthorised technical modications may reduce or

entirely void the seat´s protective properties. Do NOT make any technical modications to the child seat.

• Use the child seat only as described in the user instructions.

*ECE = European Standard for Child safety Equipment

Storage compartment

DUALFIX base

BRITAX RÖMER Child safety seats

Testing and certication

in accordance with ECE R 44/04

Rearward facing Forward facing Group Body weight

MAX-WAY 1 2 – 9 – 25 kg

MULTI-TECH 2 1 2 – 9 – 25 kg

KIDFIX /KIDFIX SICT 2 3 – 15 – 36 kg

KID / KID plus 2 3 – 15 – 36 kg

0–18 kg

9–18 kg

CARE AND MAINTENANCE

Care for the harness buckle

It is vital for the safety of your child that the harness buckle works correctly. Malfunc-

tions of the harness buckle are usually caused by accumulations of dirt or foreign

bodies. Malfunctions are as follows:

• The buckle latches are ejected only slowly when the red release button is

pressed.

• The buckle latches will no longer lock home (i.e. they are ejected again if you try

to push them in).

• The buckle latches engage without an audible „click“.

• The buckle latches are difcult to insert (you feel resistance).

• The buckle only opens if extreme force is applied.

Remedy

Wash out the harness buckle so that it functions properly once again.

Cleaning the cover

Please be sure to use only genuine BRITAX RÖMER replacement seat covers,

as the seat cover is an integral part of the child safety seat which plays an impor-

tant role in ensuring that the system works properly. Replacement seat covers

are available from your retailer.

• The child seat must not be used without its cover.

• The cover can be removed and washed with a mild detergent using the washing

machine‘s cycle for delicate items (30 °C). Please observe the instructions on

the washing label of the cover.

• The plastic parts can be cleaned using soapy water. Do not use harsh

cleaning agents (such as solvents).

• The harnesses can be washed in lukewarm soapy water.

• The shoulder pads can be washed in lukewarm soapy water.

CAUTION! Never remove the buckle latches 21 from the straps.

CAUTION! The child seat must not be used without the seat cover.

Removing the cover

1. Grasp the recline button

and move the seat shell 26 downwards into the

upright position.

2. Loosen the harness straps as far as possible.

3. Open the harness buckle 07 (press the red button).

4. Slide the headrest 04 to its lowest position.

6. Remove the cover of the headrest 04 .

7. Open the poppers on the left and right of the rear part of the cover.

8. Unhook the elastic seam of the cover under the edge of the seat shell.

TIP: Start at the handles on the side and at the upper edge of the seat shell.

9. Pull the cover up and over the bezel of the strap adjuster.

10. Feed out the harness buckle 07 and the end of the strap from the cover.

11. Pull the cover upwards a little and then put it with the cutout over the headrest 04 .

Retting the Cover:

Simply follow the steps in the opposite order.

CAUTION! Check that the harness straps are not twisted and that they have

been correctly inserted in the belt slots on the cover.

Removing the shoulder pads:

1. Loosen the 5-point harness of the child seat as much as possible. Unhook the

shoulder straps 06 on the backside of the childseat from the connecting piece

28 .

2. Pull below both, the shoulder pads 05 and the two shoulder straps 06 to the

front through the slots 29 . (Frontside of the childseat)

3. Slide the belt loops 32 off of the plastic extensions 30 of the shoulder belt

height adjuster 31 .

4. Pull the shoulder pads 05 through the slots 29 to the front.

5. Remove the shoulder pads 05 from the shoulder straps 06 .

Retting the shoulder pads:

Simply follow the steps in the opposite order.

Never use the child seat without correct installed shoulder pads. CAUTION!

EASY ACCESS FUNCTION

When used in rearward facing mode:

Group 0+ (0-13 kg)

1.Grasp the recline button 10 and put

the child seat into the most reclined

position.

2.Press the grey rotation button 23 and

turn the seat 90° into the Easy Access

mode

CAUTION! Before every journey:

make sure that the rotating part of the

child seat is fully engaged by making

sure the child seat is in a xed position.

Group 1 (9-18 kg)

1. Grasp the recline button 10 and put

the child seat whilst pressing the grey

safety button 20 into the most upright

position.

2.Press the grey rotation button 23 and

turn the seat 90° into the Easy Access

mode

CAUTION! Before every journey:

make sure that the rotating part of the

child seat is fully engaged by trying to

turn the seat around in both directions.

When used in forward facing mode:

Group 1 (9-18 kg)

1. Grasp the recline button 10 and

put the child seat into the most upright

position.

2. Press the grey rotation button 23

and turn the seat 90° into the Easy

Access mode

CAUTION! Before every journey:

make sure that the rotating part of the

child seat is fully engaged by trying to

turn the seat around in both directions.

The DUALFIX 360° seat rotation which makes it easier to get your child into or out

of the child seat (Easy Access Function).

The DUALFIX has a grey safety button 20 which must be pressed when changing

between group 0+ and group 1. The grey safety button 20 prevents that the child

seat is used by mistake in the wrong group for your child.

28 32 31 30 29

07 21

DUALFIX

0 - 18 kg

9 - 18 kg

0 ~ 4 y

User instructions

www.britax.eu

EDV-Nr. 2000009861 14/01

Produkt Specifikationer

Mærke:	Britax-Römer
Kategori:	Bilsæde
Model:	Dualfix
Bredde:	450 mm
Dybde:	530 mm
Højde:	780 mm
Vægt:	14700 g
Produktfarve:	Black, White
Monteringstype:	ISOFIX
type af sikkerhedssele:	5-punkt
Sidebeskyttelse:	Ja
Gruppe:	0+/1 (0 - 18 kg; 0 - 4 år)
Justerbar nakkestøtte:	Ja