Cambridge BT100 Manual

Cambridge Bluetooth musik modtager BT100

Læs nedenfor 📖 manual på dansk for Cambridge BT100 (2 sider) i kategorien Bluetooth musik modtager. Denne guide var nyttig for 66 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

BT100 and Blutooth Audio streaming

The BT100 is compatible with the following Cambridge Audio products:

• DacMagic Plus

• Sonata NP30

• Stream Magic 6

Selecting the BT100 as an input on the compatible Cambridge Audio product,

allows that product to receive wireless Bluetooth audio from most

phones/tablets and laptops.

When connected to your Cambridge Audio product, the BT100 allows it to

receive BluetoothAudio (known as Bluetooth Advanced Audio Distribution

Proﬁle or A2DP). Contact your dealer for details.

The BT100 supports Bluetooth A2DP using either the original SBC encoded

form or the latest higher quality apt-X encoded form (if the sending device

supports it).

SBC and apt-X refer to the encoding used over the wireless Bluetooth interface

only and not the format your music may be in, which can be any type that your

phone/ laptop or other playing device supports.

Your playing device plays your ﬁles then re-encodes the playback before

streaming it to the BT100 in one of these two formats.

Many phones and laptops now feature Bluetooth with A2DP. SBC should be

supported by all such devices (it is the madatory format for A2DP).

apt-X is optional, so check if your sending device supports it, if you wish to

achieve the highest quality audio transfer.

Note: The BT100 declares that it can handle both SBC and apt-X to the

sending device which will then use whichever version it supports.

What is apt-X?

apt-X is a high quality CODEC (CODer/DECoder) i.e. a way of compressing

audio data so it can be sent over a link such as Bluetooth then decompressed

on the other side (if both devices support it).

If your Bluetooth audio source does not support apt-X, the BT100 will fall back

to using the standard SBC CODEC that is supported by all Bluetooth audio

devices.

BT100 controls and connections

A. Pairing button/Status LED

Button performs pairing and related functionality. Integrated LED indicates

BT100 status.

B. USB plug

Streams high quality USB audio into your compatible Cambridge Audio

product’s USB socket.

C. Extension Cable

Allows the BT100 to be positioned for accessibility or optimal wireless

reception.

Pairing

To begin streaming high quality music from your chosen media source it will

ﬁrst need to be paired with the BT100.

A. Insert BT100 into the USB port on your compatible Cambridge Audio

product.

B. Wait a moment for the BT100 to be detected. Then double click the button

to enter pairing mode, the BT100 indicates it is in the pairing state by

ﬂashing rapidly.

C. Put your Bluetooth compliant audio source into pairing mode. Please

consult your manufacturer’s user manual on how to do this.

Pairing your BT100 and source establishes an authorised audio link that can

then be used again in the future without having to go through this stage again.

After pairing you can just select the BT100 and play at any time as long as

your Bluetooth A2DP compatible source (phone/laptop etc.) is within approx.

10m of the BT100.

Normally on your source you will need to select Bluetooth Pairing and then the

BT100 should appear as ‘Cambridge Audio BT100’ in a list of locally found

Bluetooth devices.

Select that item in the list to ﬁnish pairing.

D. On successful pairing, the BT100s LED goes off for a second or two, then

triple ﬂashes quickly. The LED then goes off and only lights up in the future

when you are playing audio via Bluetooth.

E. To play back via a paired Bluetooth device, simply select the BT100 on that

device and start playing. The BT100 LED lights up constantly when

streaming SBC or on and ﬂicks off every 2 seconds when streaming apt-X.

Notes:

- You can pair to more than one source up to a maximum of 8 sources at any

time. Pairing to a 9th device will cause the ﬁrst one to be forgotten and so

on. However as you would expect the BT100 can only play back from one of

these sources at a time.

- When you have ﬁnished playback many sources keep the Bluetooth link

active for a time unless you actively tell them to stop by deselecting playback

via the BT100 (do not unpair as this is not necessary).

This can prevent another source to be able to access the BT100.

To immediately use another source, simply deselect the BT100 for playback

on your ﬁrst source device before starting up on a second.

- Some devices stream empty data all the time even when paused or stopped.

These devices will cause the BT100s LED to be on even if playback is

currently stopped or paused.

BT100

Produkt Specifikationer

Mærke:	Cambridge
Kategori:	Bluetooth musik modtager
Model:	BT100
Produktfarve:	Sort
Bluetooth-profiler:	A2DP
Værtsgrænseflade:	USB
Transmissionsafstand:	10 m
Kompatibilitet med Apple-enheder:	iPad