Cambridge TV2 Manual


Læs nedenfor 📖 manual på dansk for Cambridge TV2 (1 sider) i kategorien Soundbar. Denne guide var nyttig for 35 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
PLACEMENT! TV2 IS DESIGNED TO BE PLACED UNDER YOUR TV. THE TV MUST HAVE A BASE NO WIDER THAN 550MM
(21.5”) AND NO DEEPER THAN 300MM (12) AND MUST WEIGH NO MORE THAN 30KG (66LBS). IF THE TV BASE IS TOO
LARGE TO FIT, PLACE TV2 ON A LOWER SHELF OF YOUR TV RACK.
TOP TIPS
SOUND MODES
There are 4 dierent modes that can be selected to enhance your sound
experience. You can also Increase or decrease the Subwoofer output.
TV: Greatly improved TV sound.
Music: Enhances stereo music and music videos.
Film: Designed to get the best sound from movies.
Voice: Enhances voices to improve intelligibility.
AUTO POWER DOWN
To save power, TV2 will
automatically turn o after 20
minutes if no sound is playing
from your TV.
AUTO POWER ON
When you turn on your TV,
TV2 will detect the sound and
automatically turn on.
TV CONNECTIONS
Only one audio connection to your TV is
required, in order of preference:
1. Optical: If available on your TV, use this for
best quality.
2. ARC: If your TV has a socket labelled ARC
use this connection.
3. RCA: Connect both left and right channels
to your TV.
4. AUX In: Connect to the headphone output
of your TV if neither ARC or optical are
available on your TV.
Note: If the 3.5mm socket is used it takes
priority over the RCA input which will be muted.
Once paired, music from your device will play
through the unit.
To add another Bluetooth device, repeat from
step 2. TV2 will store up to 8 paired devices
in memory.
LEARNING YOUR TV REMOTE
Remove the fabric grille and locate the
control panel. Follow the instructions
remembering to point your TV remote at the
control panel whilst learning.
BLUETOOTH SET-UP
TV2 is equipped with Bluetooth to allow
wireless playback from any Bluetooth
equipped phone, tablet or computer.
1. Select the Bluetooth input BT on the
remote.
2. To connect a Bluetooth device to TV2,
press and hold the BT button and the
Blue LED will blink.
3. Consult the instructions of the Bluetooth
device to connect to TV2. Successful
pairing will be signalled by a ‘beep’ from
the unit and the Blue LED will stop
ashing.
Service
Only
100-240V AC ~ 50/60Hz
Power AC
Max Power Cons umption: 120W
Aux In RL Audio In Optical In ARC
Optical In R LAudio In Aux InARC
Vol (2secs)Learn
1
2
Learn Vol
Vol on TV remote
Learn Vol
Vol
on TV remote
AUX Line in Optical in AC power socket ARC
TV2 tv sound plinth with bluetooth
To talk to us, call +44 (0)203 514 1521 (UK Local) or 1-877-357-8204 (USA)
TV2 is only able to decode LPCM(PCM) 2.0 format signal, Please ensure your source output setting is set to LPCM(PCM).
AP35051/1


Produkt Specifikationer

Mærke: Cambridge
Kategori: Soundbar
Model: TV2

Har du brug for hjælp?

Hvis du har brug for hjælp til Cambridge TV2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Soundbar Cambridge Manualer

Cambridge

Cambridge TV 2 Manual

3 Oktober 2024
Cambridge

Cambridge TV5 v2 Manual

24 Februar 2024
Cambridge

Cambridge TV2 Manual

26 November 2023

Soundbar Manualer

Nyeste Soundbar Manualer

Pyle

Pyle PWPSB2403 Manual

14 November 2024
Pyle

Pyle PWPSB1103 Manual

13 November 2024
Samsung

Samsung HW-K561 Manual

2 November 2024
Bauhn

Bauhn ASBBT-0724 Manual

19 Oktober 2024
Samsung

Samsung HW-K660 Manual

19 Oktober 2024
Grundig

Grundig GSB 930 Manual

18 Oktober 2024
Insignia

Insignia NS-HTSB20S Manual

15 Oktober 2024
JVC

JVC TH-E324B Manual

10 Oktober 2024
Samsung

Samsung HW-J8511 Manual

4 Oktober 2024