Canarm Evlin IPL1121A01BK Manual

Canarm Lys Evlin IPL1121A01BK

Læs nedenfor 📖 manual på dansk for Canarm Evlin IPL1121A01BK (1 sider) i kategorien Lys. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
PENDANT LIGHT
2. Mount the mounting
bracket to electrical box using
electrical box screws (not
included).
3. Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground
screw in the electrical box.
Connect the black wire (or wire
with marking) from the fixture to
the black wire in the electrical
box and connect the white wire
from the fixture to the white wire
in the electrical box.
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no
bare wire (on the black and
white) is visible at the wire nuts.
5. Attach fixture to mounting
bracket by tightening the 2 screws.
6. Install specified bulb type
and wattage (not included).
7. Screw the glass shade on to
the fixture. Ensure the glass is
securely attached to the fixture.
Tel: (613) 342-5424, Fax: (800) 263-4598
IPL1121A01
10/22
Phillips
Screwdriver Wire Cutters
Pliers Wrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Wiring supplies
as required by
local electrical
code
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
Rod
Swivel
arm
Swivel
arm
Fixture
Note: Determine desired
mounting option prior to
proceeding with installation.
1. A. INSTALLATION FOR
PENDANT MOUNT
i. Install the length of rod that is
required by threading wire
through the rod and screwing it
to the fixture. Install swivel to the
rod, ensuring that the plastic
bushing sleeve is at the swivel.
B. INSTALLATION FOR SEMI
FLUSH MOUNT
i. Remove the swivel arm from
the canopy by unscrewing the
hex nut, star washer and washer.
ii. Place the canopy over the
nipple on the fixture and secure
in place with the washer, star
washer and hex nut.
Star
Washer
Hex
Nut
Canopy
Canopy
Star
Washer
Hex Nut Screw
Bulb
Glass
Fixture
Plastic
bushing
sleeve
Plastic
bushing
sleeve
Washser
Washser
White
Electrical
Box
Electrical Box Screws
(not included)
Mounting
Bracket
Black
House
supply
Ground
wire
Fixture
Ground wire
Mounting
Bracket
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH,
make sure that glass is properly secured.


Produkt Specifikationer

Mærke: Canarm
Kategori: Lys
Model: Evlin IPL1121A01BK

Har du brug for hjælp?

Hvis du har brug for hjælp til Canarm Evlin IPL1121A01BK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Canarm Manualer

Lys Manualer

Nyeste Lys Manualer