Canarm Leona IPL2036B01BK Manual

Canarm Lys Leona IPL2036B01BK

Læs nedenfor 📖 manual på dansk for Canarm Leona IPL2036B01BK (1 sider) i kategorien Lys. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
PENDANT
LIGHT
1. Install the length of rod that is
required by threading wire
through the rod and screwing it to
the fixture. Install swivel to the rod,
ensuring that the plastic bushing
sleeve is at the swivel.
2. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”. Mount the mounting
bracket to electrical box using
electrical box screws (not
included). Make sure the studs on
the mounting bracket are facing
out from the electrical box.
3. Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground screw
in the electrical box. Connect the
black wire (or wire with marking)
from the fixture to the black wire in
the electrical box and connect the
white wire from the fixture to the
white wire in the electrical box.
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no bare
wire (on the black and white) is
visible at the wire nuts.
5. Position fixture over studs on
mounting bracket assembly.
Secure fixture in place with star
washers and cap nuts.
6. Install specified bulb type and
wattage (not included).
White
Black
House supply
Ground wire
Fixture
Ground wire
Tel: (613) 342-5424, Fax: (800) 263-4598
IPL2036B01
10/22
Star
Washer Cap
Nut
Fixture
Stud
Rod
Swivel
Fixture
Bulb
Phillips
Screwdriver Wire Cutters
Pliers Wrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Wiring supplies
as required by
local electrical
code
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A
CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
INSTALLATION:
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
“B”
Studs
Electrical Box Screws
(not included)
Electrical
Box Mounting
Bracket
Plastic
bushing
sleeve
Plastic
bushing
sleeve


Produkt Specifikationer

Mærke: Canarm
Kategori: Lys
Model: Leona IPL2036B01BK

Har du brug for hjælp?

Hvis du har brug for hjælp til Canarm Leona IPL2036B01BK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Canarm Manualer

Lys Manualer

Nyeste Lys Manualer