Cateye Rapid X2 KINETIC Manual

Cateye Lommelygte Rapid X2 KINETIC

Læs nedenfor 📖 manual på dansk for Cateye Rapid X2 KINETIC (2 sider) i kategorien Lommelygte. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

TL-LD710K

Rubber base for Sharp Aero

For posts with a more acute angle, use the

rubber base for Sharp Aero.

OPTION

Always charge the product before use.

Attach the light securely to the seatpost.

Automatic battery-saving function:

When the remaining battery power is low, the lighting mode switch

starts flashing and the lighting mode changes to flash. The Kinetic

function is disabled when the remaining battery power is low.

Charge the light as soon as possible.

ENG

TLLD710K-171117 5

HOW TO CHARGE

HOW TO USE

HOW TO MOUNT

Seatpost

Click Lighting mode switch

Press and hold ON OFF

Low

Approx. 5h*

High

Flashing

Approx. 30h*

Rapid

Approx. 16h*

* The stated runtime of each mode exclude the Kinetic function, and the

actual runtime may vary when the Kinetic function is enabled.

As a reference, when the Kinetic function is enabled 60 times / hour, the

runtime will be approx. 3 hours in Low mode, approx. 7 hours in Flashing

mode, and approx. 5 hours in Rapid mode.

Kinetic function:

When deceleration of the

bicycle is detected, the light

will turn on in the High mode

for approximately 2.5 seconds

regardless of the lighting

mode selected. The light will

remain on in the High mode

as long as deceleration is

detected.

WARNING!!!

• Before your trip, please make sure the light is

securely attached and lights up.

Do not use a damaged rubber band.

•

Always pay attention to the remaining battery power

by checking the indicator periodically while using.

CAUTION!

• This light detects deceleration through the use of

acceleration sensor. Please note that activation of

the Kinetic function depends on the degree of

deceleration, the light may not react or the

reaction may be delayed.

• Stop your bicycle to operate the switch.

• Keep the light away from children.

• Charging, discharging, and storing in high

temperatures will cause the rechargeable battery

to deteriorate faster. Do not place the light inside

a vehicle or near a heater.

• This unit is not totally waterproof. Please wipe

and dry it completely after using in rain.

Otherwise, it may cause failure.

• If the light unit or parts become dirty with mud,

etc., clean with a soft cloth which is moistened

with mild soap. Never apply paint thinner, benzine

or alcohol; damage will result.

PRECAUTIONS ON CHARGING

• We recommend using 500+mA (USB2.0) USB

battery charger.

• Avoid charging in direct sunlight or in a vehicle

parked under direct sunlight, and make sure to

charge only when the ambient temperature is

between 5 and 40°C .(41°F and 104 °F)

• Before charging, be sure that no dust or other

foreign objects attach to the USB plug.

•

Do not subject the light to vibrations while charging.

• When your PC is in sleep state, the unit cannot be

charged.

• Once charging is complete, be sure to disconnect

the USB plug.

•

Charging and lighting times are approximate values,

and will vary by environmental and user conditions.

• If the illumination time is significantly reduced

even after proper charging, the rechargeable

battery may be nearing the end of its service life.

Dispose of the battery as described in “PRECAU-

TIONS ON DISPOSAL”.

STORAGE PRECAUTIONS

Cool and dry storage is recommended.

For long period storage, it is important to charge the

battery 30 minutes every 6 months.

PRECAUTIONS ON DISPOSAL

When disposing of the light unit, remove the

internal rechargeable battery and dispose of it

according to local regulations.

Manual

Before using the light, read this

manual thoroughly and keep it for

future reference.

Light unit USB cable

(MICRO USB)

Rubber band

(Large/Small)

USB cable

To PC or USB battery charger

Charging

Charging is completed

Standard

charging time Approx. 2 h

(USB 2.0)

Switch (Indicator)

Rubber band

Produkt Specifikationer

Mærke:	Cateye
Kategori:	Lommelygte
Model:	Rapid X2 KINETIC
Tænd-/slukkontakt:	Ja
Bredde:	74.4 mm
Dybde:	30.5 mm
Højde:	32.9 mm
Vægt:	32 g
Produktfarve:	Black, Red
Kontroltype:	Knapper
Lampe type:	COB LED
Batteriteknologi:	Lithium polymer (LiPo)
Driftstemperatur (T-T):	5 - 40 °C
Vandfast:	Ingen
Opladningstid for batteri:	2 t
Lysfarve:	Rød
Emballageindhold:	Monteringssæt
Genopladeligt batteri:	Ja
Opladningskilde:	USB
Lommelygte type:	Cykellygte
Lommelygte tilstande:	Strobe mode, Turbo
Integreret LED:	Ja
Antal lystilstande:	3
USB-opladningsport:	Ja
Egnet til udendørs brug:	Ja