Celly GHOSTMAGCHARGE Manual

Celly Batterioplader GHOSTMAGCHARGE

Læs nedenfor 📖 manual på dansk for Celly GHOSTMAGCHARGE (36 sider) i kategorien Batterioplader. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/36
Please read this manual and
pay attention to the safety
warnings before using the
product
Keep the manual to have the possibility
to consult it at a later time, or in case of
passing the product to a third party.
Esprinet S.p.A. can not in any way be
held responsible for injury or damage
caused to people or things resulting from
improper use of the product.
Safety notes
Connect the product only indoors and
compatible USB power supplies (DC 5V /
9V / 12V, 2A)
Connect the product only to an easily
accessible outlet, so that you can quickly
disconnect them from the power supply in
the event of a problem.
Do not use the product if it is damaged.
Never touch the product with wet or
damp hands.
Use the product indoors only.
Do not use in humid environments or in
the rain.
Never insert metallic objects such as keys
or metal clips into the openings of the
product.
To avoid malfunction or damage to the
product, avoid accidental drops, crush,
puncture, or exert a high level of pressure
on the product.
Keep away from moisture, water or
other liquids. If the product comes into
contact with water, moisture or other
liquids, do not use it to avoid electric
shock or damage. Do not store or expose
the product to any heat source, direct
sunlight, radiators, stoves, or other heat
sources such as the dashboard of your
car in the summer. Never use the product
unsupervised. During operation, the
product may become hot.
Never use the product when moving
from a cold to a warm environment.
Condensation may form and, in some
cases, damage the product.
Allow the product to reach room
temperature before plugging it back in
and using it again.
is could take several hours.
Usage temperature: 0-35 ° C.
Do not attempt to modify, repair or
disassemble the product.
Do not use a damaged product.
Never use aggressive detergents, alcohol
or other chemical solutions for cleaning as
they could damage the housing or even
compromise its use.
Cleaning the product.
Disconnect all connected cables before
starting cleaning. Do not immerse the
product in water or other liquids.
ere are no replaceable parts inside the
product. Never open and / or disassemble
it. Keep the product out of the reach of
children. Do not allow children or persons
with disabilities to use electrical products
unsupervised.
Make sure children do not play with the
wrap. ese could swallow it and choke.
Use
1. Before charging the device, make sure
that its technical characteristics (voltage,
output and amperage) are compatible
with the charger.
2. Connect the supplied cable to a USB
power supply with compatible output (DC
5V / 9V / 12V, 2A) and to the wireless
charger.
3. Place the wireless charging and
magnetic alignment compatible device,
make sure it is in the correct and stable
position; to find out the charging status,
check the charging icon displayed on the
device screen.
4. If you are having problems with
charging, the possible reasons are as
follows:
• Too high or low voltage
• Too high or low current
• Overheating
• Foreign object
• Distance too high
5. With the device fully charged, remove it
from the wireless charger.
6. Disconnect the charger from the power
source after use.
Cleaning
Disconnect all cables before cleaning.
If necessary, clean the holder with a
damp cloth and allow it to dry completely
before use.
Use a clean brush with soft, long bristles
to remove dust from the connectors.
Do not use solvents, corrosive agents or
gaseous cleaners.
Make sure that water or other liquids do
not enter the housing.
Storage
Store the charger in a clean and dry area.
Keep away from direct sunlight.
Product disposal (applicable in
countries with separate collection
systems for recyclable materials)
Old products cannot be disposed of in
household waste! If the product is no
longer able to be used at a certain time,
dispose of it according to the regulations
in force in your country. is ensures that
old products are professionally recycled
and also excludes negative consequences
for the environment. For this reason,
electrical equipment is marked with the
symbol shown here.
Technical specifications
Input: DC 5V / 2A, 9V / 2A, 12V / 2A
Output: DC 5V / 1A, 7.5V / 1A, 9V /
1.12A, 9V / 1.66A
Maximum output power: 15W
Maximum Magnetic H field strenght:
<5A/m at 20 cm
Frequency: 110-205KHz
is product complies with the
RoHS directive 2011/65 / EU
- 2015/863 / EU. e product is
CE marked and complies with the safety
standards established by the European
Union.Hereby, Esprinet SpA declares that
the product complies with Directive
2014/53 / EU.
e full text of the EU declaration of
conformity is available at the following
Internet address: www.celly.com/
exchange/CELLY-SPA/Dichiarazioni_di_
conformita/GHOSTMAGCHARGE/DOC.pdf
Celly® is a trademark owned by Esprinet
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy
Park 20, 20871 Vimercate
(MB) - Italy
Made in China.
Instruction manual
WIRELESS CHARGER
Model: GHOSTMAGCHARGE
Rev02 - 10.05.2023
EN


Produkt Specifikationer

Mærke: Celly
Kategori: Batterioplader
Model: GHOSTMAGCHARGE

Har du brug for hjælp?

Hvis du har brug for hjælp til Celly GHOSTMAGCHARGE stil et spørgsmål nedenfor, og andre brugere vil svare dig




Batterioplader Celly Manualer

Batterioplader Manualer

Nyeste Batterioplader Manualer