Celly GHOSTSUPMAGFLCH Manual

Celly Batterioplader GHOSTSUPMAGFLCH

Læs nedenfor 📖 manual på dansk for Celly GHOSTSUPMAGFLCH (46 sider) i kategorien Batterioplader. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/46
Please read this manual and
pay attention to the safety
warnings before using the
product. Keep the manual
to have the possibility to consult it at
a later time, or in case of passing the
product to a third party. Esprinet S.p.A.
can not in any way be held responsible
for injury or damage caused to people or
things resulting from improper use of the
product.
Safety notes
Connect the product only indoors and
compatible USB power supplies (DC 5V
/ 9V / 12V, 2A) Connect the product only
to an easily accessible outlet, so that you
can quickly disconnect them from the
power supply in the event of a problem.
Do not use the product if it is damaged.
Never touch the product with wet or
damp hands. Use the product indoors
only. Do not use in humid environments
or in the rain. Never insert metallic
objects such as keys or metal clips into
the openings of the product.
To avoid malfunction or damage to the
product, avoid accidental drops, crush,
puncture, or exert a high level of pressure
on the product. Keep away from moisture,
water or other liquids. If the product
comes into contact with water, moisture
or other liquids, do not use it to avoid
electric shock or damage. Do not store or
expose the product to any heat source,
direct sunlight, radiators, stoves, or other
heat sources such as the dashboard of
your car in the summer. Never use the
product unsupervised. During operation,
the product may become hot. Never use
the product when moving from a cold to
a warm environment. Condensation may
form and, in some cases, damage the
product. Allow the product to reach room
temperature before plugging it back in
and using it again.
This could take several hours.
Usage temperature: 0-35 ° C.
Do not attempt to modify, repair or
disassemble the product.
Do not use a damaged product.
Never use aggressive detergents, alcohol
or other chemical solutions for cleaning
as they could damage the housing or
even compromise its use.
Cleaning the product.
Disconnect all connected cables before
starting cleaning. Do not immerse the
product in water or other liquids.
There are no replaceable parts inside the
product. Never open and / or disassemble
it. Keep the product out of the reach of
children. Do not allow children or persons
with disabilities to use electrical products
unsupervised. Make sure children do not
play with the wrap. These could swallow
it and choke.
Use
1. Before charging the device, make sure
that its technical characteristics (voltage,
output and amperage) are compatible
with the charger.
2. Connect the supplied cable to a USB
power supply with compatible output
(DC 5V / 9V / 12V, 2A) and to the wireless
charger.
3. Place the wireless charging and
magnetic alignment compatible device,
make sure it is in the correct and stable
position; to find out the charging status,
check the charging icon displayed on the
device screen.
4. If you are having problems with
charging, the possible reasons are as
follows:
• Too high or low voltage
• Too high or low current
• Overheating
• Foreign object
• Distance too high
5. With the device fully charged, remove
it from the wireless charger.
6. Disconnect the charger from the power
source after use.
Cleaning
Disconnect all cables before cleaning.
If necessary, clean the holder with a
damp cloth and allow it to dry completely
before use.
Use a clean brush with soft, long bristles
to remove dust from the connectors. Do
not use solvents, corrosive agents or
gaseous cleaners. Make sure that water
or other liquids do not enter the housing.
Storage
Store the charger in a clean and dry area.
Keep away from direct sunlight.
Product disposal (applicable in
countries with separate
collection systems for recyclable
materials)
Old products cannot be disposed of in
household waste! If the product is no
longer able to be used at a certain time,
dispose of it according to the regulations
in force in your country. This ensures that
old products are professionally recycled
and that it also excludes negative
consequences for the environment.
For this reason, electrical equipment is
marked with the symbol shown here.
Technical specifications
Input: DC 5V / 2A, 9V / 2A, 12V / 2A
Output: 5W / 7.5W/10W / 15W
Maximum output power: 15W
Maximum Magnetic H field strenght:
<5A/m at 20 cm
Frequency: 110-205KHz
This product complies with the
RoHS directive 2011/65 / EU -
2015/863 / EU. The product is
CE marked and complies with the safety
standards established by the European
Union.Hereby, Esprinet SpA declares that
the product complies with Directive
2014/53 / EU. The full text of the EU
declaration of conformity is available at
the following Internet address: www.
c e l l y . c o m / ex c h a n g e /C E L LY - S PA /
D i c h i a r a z i o n i _ d i _ c o n f o r m i t a /
GHOSTSUPMAGFLCH/DOC.pdf
Celly® is a trademark owned by Esprinet
S.p.A.
All brands are registered trademarks of
their respective owners.
Esprinet S.p.A., via Energy
Park 20, 20871 Vimercate
(MB) - Italy
Made in China.
For info and contacts, please
write to:
contact@esprinet.com
www.celly.com
Instruction manual
WIRELESS CHARGER
Model: GHOSTSUPMAGFLCH
Rev00 - 06.2024
EN


Produkt Specifikationer

Mærke: Celly
Kategori: Batterioplader
Model: GHOSTSUPMAGFLCH

Har du brug for hjælp?

Hvis du har brug for hjælp til Celly GHOSTSUPMAGFLCH stil et spørgsmål nedenfor, og andre brugere vil svare dig




Batterioplader Celly Manualer

Batterioplader Manualer

Nyeste Batterioplader Manualer

Alogic

Alogic UL2QC10CA Manual

23 December 2024
Alogic

Alogic QC10PCMBLK Manual

23 December 2024
Alogic

Alogic QC10MSGR Manual

23 December 2024
Alogic

Alogic QC10MCGD Manual

23 December 2024
Alogic

Alogic WCCA30WHCC Manual

23 December 2024
Alogic

Alogic WCG1X65 Manual

23 December 2024
Alogic

Alogic QC10AWNQH Manual

23 December 2024
Alogic

Alogic QC10MSLV Manual

23 December 2024
Alogic

Alogic Matrix MSCCM Manual

23 December 2024