Chief HB010R Manual

Chief Projektor tilbehør HB010R

Læs nedenfor 📖 manual på dansk for Chief HB010R (2 sider) i kategorien Projektor tilbehør. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

8803-000005 06/04/07

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

HB-010R

V P C M IDEO ROJECTOR EILING OUNT

FOR RUNCO VX-1000C D C, VX1000CI, VX-1000 ,VX-2 ,

XV-4000CI, VX VX VX VX-4000D, -5000C, -5000CI, -5000D,

The Chief HB010R video projector ceiling mount is designed to provide fast, simple and secure installation of the

Runco VX-1000c, . Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image

alignment. The HB010R mount also has positive registration lock so that the projector may be removed without

losing projector mount registration.

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL

INJURY! All components must be securely fastened to each other and to the ceiling, AND

the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it

cannot, the ceiling MUST be reinforced.

Unpack and check contents:

(1) Deluxe ceiling mount housing assembly. (6) #10 washers, flat

(1) Runco mounting bracket (6) 10 - 32 x 3/8” Screws, PH, Phillips

(4) 5/16” Flange Nuts (6) 10 - 32 x 2” Screws, PH, Phillips

(6) Nylon Spacer .50” OD X .26”ID X 1.625 TL

INSTALLATION INSTRUCTIONS

1. Turn your projector upside down.

2. Place the (6) Nylon Spacers over the six threaded inserts in the bottom of the projector .

3. Place the Runco mounting bracket on the six nylon spacers on the bottom of the projector so the hooks are

facing the back and the six holes in the bracket line up the six threaded inserts in the bottom of the projector.

4. Slide the (12) #10 washers, two on each (6) 10-32 x 2” Screw and install them into the six threaded inserts in

the projector. Securely tighten all six mounting screws at this time.

5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the

ceiling. If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.

6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the

screen.

PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with

mechanical installations. A third assistant is recommended.

6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting

plate. Be sure the Runco mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange nuts.

For projector alignment see attached sheet.

Produkt Specifikationer

Mærke:	Chief
Kategori:	Projektor tilbehør
Model:	HB010R

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief HB010R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Projektor tilbehør Chief Manualer

Chief CHCMS115 Manual

30 August 2024

Chief CMS036 Manual

21 August 2024

Chief SSB176 Manual

21 August 2024

Chief SSM116 Manual

21 August 2024

Chief CMS006009W Manual

21 August 2024

21 August 2024

21 August 2024

21 August 2024

21 August 2024

21 August 2024

Projektor tilbehør Manualer

Nyeste Projektor tilbehør Manualer

Barco R9861400 Manual

27 September 2024

Barco R9832766 Manual

15 September 2024

Barco R9842370 Manual

12 September 2024

Barco R9855978 Manual

6 September 2024

My Wall HL 41 ML Manual

5 September 2024

Speaka SP-PWM-200 Manual

5 September 2024

Speaka SP-PWM-100 Manual

5 September 2024

Speaka PRB-1 Manual

5 September 2024

Roadinger UP-4 QCL Manual

5 September 2024

Panasonic ET-D3LEW300 Manual

5 September 2024