Chief HB32B Manual

Chief Projector accessoire HB32B

Læs nedenfor 📖 manual på dansk for Chief HB32B (3 sider) i kategorien Projector accessoire. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

8803-000104

12/07

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com

HB-32B

VIDEO PROJECTOR CEILING MOUNT

FOR DIGITAL PROJECTION TITAN SERIES,

The Chief HB32B video projector ceiling mount is designed to provide fast, simple and secure installation of the Barco

CLM10+. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The

HB32B mount also has positive registration lock so that the projector may be removed without losing projector mount

registration.

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL

INJURY! All components must be securely fastened to each other and to the ceiling, AND

the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it

cannot, the ceiling be reinforced.MUST

Unpack and check contents:

(1) Deluxe ceiling mount housing assembly. (3) M10 Washers, Flat

(1) Panasonic mounting bracket (3) M10 x 1.5 x 50mm, bolt

(4) 5/16” Flange Nuts (6) .5” x .257” x .625” nylon spacers

INSTALLATION INSTRUCTIONS

1. Turn your projector upside down.

2. Place the three 5/8” tall nylon spacers on the bottom of your projector and stack the second three on top of the

fist ones so they are two spacers tall.

3. Place the Barco custom mounting bracket over on these nylon spacers on the bottom of your projector lining up

with the three threaded inserts in the bottom of the projector with the three holes in the bracket.

4. Slide the (3) M10 washers, one on each (3) M10 x 50mm bolt and install them into the three threaded inserts in

the projector. Securely tighten all three mounting bolts at this time.

4. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.

If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.

5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the

screen.

PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with

mechanical installations. A third assistant is recommended.

6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting

plate. Be sure the Panasonic mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange

nuts.

For projector alignment see attached sheet.

Produkt Specifikationer

Mærke:	Chief
Kategori:	Projector accessoire
Model:	HB32B

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief HB32B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Projector accessoire Chief Manualer

Chief CHCMS115 Manual

30 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

Projector accessoire Manualer

Nyeste Projector accessoire Manualer

Barco R9832766 Manual

15 September 2024

Barco R9842370 Manual

12 September 2024

Barco R9855978 Manual

6 September 2024

My Wall HL 41 ML Manual

5 September 2024

Speaka SP-PWM-200 Manual

5 September 2024

Speaka SP-PWM-100 Manual

5 September 2024

Speaka PRB-1 Manual

5 September 2024

Roadinger UP-4 QCL Manual

5 September 2024

Panasonic ET-D3LEW300 Manual

5 September 2024

Unicol PGG Manual

4 September 2024