Chief HB44E Manual

Chief Projektor tilbehør HB44E

Læs nedenfor 📖 manual på dansk for Chief HB44E (2 sider) i kategorien Projektor tilbehør. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone

makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation

or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-

pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this

document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8803-002022 Rev00

a Duchossois Group Company

01/11

Continued. . .

MODEL: HB-44E Custom Projector Bracket

Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

PARTS

Figure 1

INSTALLATION

WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened

to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.

1. Lower custom HB bracket onto top of projector. Ensure that triangle in bracket points toward front of projector. (See Figure 1)

2. Attach HB bracket to projector using four M10 x 35mm hex head screws through four M10 washers and four outer corner holes in the HB

bracket. (See Figure 1)

3. Continue attaching bracket to projector using two M8 x 25mm hex head screws through two M8 washers into two outer center holes in

bracket. (See Figure 1)

4. Finish attaching bracket to projector using two M8 x 70mm hex head screws through four nylon spacers (2 spacers per hex head screw)

and two M8 washers into two center holes in bracket. (See Figure 1)

(1) BRACKET, Custom HB (4) SCREW, Hex head cap screw, M10 x 35mm

(4) NUT, Flange, Hex, 5/16-18 (2) SCREW, Hex head cap screw, M8 x 25mm

(4) WASHER, Flat, M10 (2) SCREW, Hex head cap screw, M8 x 70mm

(4) WASHER, Flat, M8 (4) SPACER, Nylon, .74 x .391 x 1.0"

x 2

Produkt Specifikationer

Mærke:	Chief
Kategori:	Projektor tilbehør
Model:	HB44E

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief HB44E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Projektor tilbehør Chief Manualer

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

31 December 2025

Projektor tilbehør Manualer

Nyeste Projektor tilbehør Manualer

Barco R9853370 Manual

14 Januar 2025

Roadinger MBT-3 Manual

6 Januar 2025

Peerless-AV PE1120-W Manual

26 December 2024

Peerless-AV PAP-SANYO-ST1 Manual

26 December 2024

Peerless-AV PAP-298 Manual

22 December 2024

Peerless-AV PWA-14S Manual

22 December 2024

Sony VPLL-Z4111 Manual

22 December 2024

NeoMounts BEAMER-C300 Manual

19 December 2024

NeoMounts BEAMER-C80 Manual

19 December 2024

NeoMounts BEAMER-W050SILVER Manual

19 December 2024