Chief HB49E Manual


Læs nedenfor 📖 manual på dansk for Chief HB49E (1 sider) i kategorien Projektor tilbehør. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
8803-000006
HB
49E
V
IDEO
P
ROJECTOR
C
EILING
M
OUNT
for Eiki LC-SX4/L, LC-X4/L, Christie Digital Vivid Blue, Sanyo PLC-EF30L,
PLC-XF30L,
The Chief HB49E video projector ceiling mount is designed to provide a fast, simple and secure installation of your
projector. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
HB49E mount also has positive registration lock so that the projector may be removed without losing projector mount
registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
All components must be securely fastened to each other and to the ceiling, AND the ceiling
MUST be capable of supporting 5 times the total weight of the installation. If it cannot, the
ceiling MUST be reinforced.
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (6) M8 - 12mm BHSCS
(1) HB Left Mounting Bracket (6) M8 - Flatwasher
(1) HB Right Mounting Bracket (4) 5/16” Flange Nuts
(1) M5.Allen Wrench
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Locate the three threaded brass inserts on each side of the bottom of the projector.
3. Place the mounting brackets on the projector lining up the three mounting holes in the brackets with the three
threaded brass inserts in the bottom of the projector.
4. Using the six M8 12mm screws and flatwashers, screw them into the six threaded inserts in the bottom of the
projector using the allen wrench provided. Securely tighten all six mounting screws at this time.
5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If
not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical
installations. A third assistant is recommended.
7. With the help of your assistants, lift the projector and install it to the studs extending from the mounting plate. Be
sure the HB49E mounting plate is seated in the slots prior to releasing hand from handles. Tighten securely
using the 5/16” flange nuts.
For projector alignment see attached sheet.


Produkt Specifikationer

Mærke: Chief
Kategori: Projektor tilbehør
Model: HB49E

Har du brug for hjælp?

Hvis du har brug for hjælp til Chief HB49E stil et spørgsmål nedenfor, og andre brugere vil svare dig




Projektor tilbehør Chief Manualer

Chief

Chief RPMC198 Manual

31 December 2025
Chief

Chief RPMA360 Manual

31 December 2025
Chief

Chief RSMA342 Manual

31 December 2025
Chief

Chief RSMA360 Manual

31 December 2025
Chief

Chief RPMC266 Manual

31 December 2025
Chief

Chief RSMC360 Manual

31 December 2025
Chief

Chief RPMA303 Manual

31 December 2025
Chief

Chief RPMC246 Manual

31 December 2025
Chief

Chief RSA000S Manual

31 December 2025
Chief

Chief RSA360 Manual

31 December 2025

Projektor tilbehør Manualer

Nyeste Projektor tilbehør Manualer