Chief HB92C Manual
Chief
Projector accessoire
HB92C
Læs nedenfor 📖 manual på dansk for Chief HB92C (1 sider) i kategorien Projector accessoire. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
HB92C
V P C M IDEO ROJECTOR EILING OUNT
FOR HRISTIE C DIGITAL EASY RIDER,
The Christie HB92C custom video projector ceiling mount is designed to provide fast, simple and secure installation.
Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The HB92C
mount also has positive registration lock so the projector may be removed without losing projector mount
registration.
Unpack and check contents:
(1) Deluxe ceiling mount assembly (8) M12 Flat washers
(1) Custom mounting bracket (8) M12 X 20mm hex bolts
(4) 5/16” flange nuts
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the custom mounting bracket on the projector so the small triangle in the bracket is toward the front of the
projector and all eight holes in the custom bracket align with the eight mounting inserts in the bottom of your
projector.
3. Place (1) M12 flat washer on each of the (8) M12 X 20mm bolts, starting them all by hand and secure them using
the proper size wrench. Using the proper wrench, securely tighten all eight mounting bolts at this time.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling MUST be reinforced.
4. Be sure the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If not,
the ceiling must be reinforced. Improper installation may result in serious personal injury.
5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
WARNING: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended
6. With the help of your one or two assistants, lift the projector and install it on the studs extending from the
mounting plate. Make sure the custom mounting plate is seated in the slots and Tighten securely using the
four 5/16” flange nuts.
For projector alignment see attached sheet.
8803-000063 02/05
Produkt Specifikationer
Mærke: | Chief |
Kategori: | Projector accessoire |
Model: | HB92C |
Har du brug for hjælp?
Hvis du har brug for hjælp til Chief HB92C stil et spørgsmål nedenfor, og andre brugere vil svare dig
Projector accessoire Chief Manualer
30 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
Projector accessoire Manualer
- Projector accessoire Sony
- Projector accessoire Panasonic
- Projector accessoire Sanyo
- Projector accessoire InFocus
- Projector accessoire Optoma
- Projector accessoire Da-Lite
- Projector accessoire Auna
- Projector accessoire Casio
- Projector accessoire BenQ
- Projector accessoire NEC
- Projector accessoire Projecta
- Projector accessoire AV:link
- Projector accessoire Manhattan
- Projector accessoire Vision
- Projector accessoire Tempest
- Projector accessoire My Wall
- Projector accessoire Lindy
- Projector accessoire Barco
- Projector accessoire Gravity
- Projector accessoire Konig & Meyer
- Projector accessoire Speaka
- Projector accessoire Chipolino
- Projector accessoire Unicol
- Projector accessoire Premier Mounts
- Projector accessoire Elite Screens
- Projector accessoire Kingpin Screens
- Projector accessoire Smart Media
- Projector accessoire Roadinger
Nyeste Projector accessoire Manualer
15 September 2024
12 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024