Clas Ohlson DY907 Manual


Læs nedenfor 📖 manual på dansk for Clas Ohlson DY907 (4 sider) i kategorien Vandingskontrol. Denne guide var nyttig for 28 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
United Kingdom •
www.clasohlson.co.uk
English
Ver. 20220803
ON O FF
E
v
e
r
y
d
a
y
E
v
e
r
y
s
e
c
o
n
d
d
a
y
E
v
e
r
y
t
h
i
r
d
d
a
y
E
v
e
r
y
s
e
c
o
n
d
w
e
e
k
1
2
3
4
5
6
7
Irrigation Timer
Art.no 31-5969   Model DY907
Please read theentire instruction manual before using theproduct and
then save it for future reference. We reserve theright for any errors in
text or images and any necessary changes made to technicaldata. In
theevent of technical problems or other queries, please contact our
Customer Services.
Safety
The product is intended for outdoor useonly.
• The product should only be used with reinforced (braided) hoses.
Damaged or dry and brittle hoses should not beused.
• The product must not be immersed in water or other liquid.
• The product must not be covered in anyway.
• All hoses and connections should be checked regularly.
• The first week theproduct is used it should be checked to ensure that
everything is working as it should.
• All connections, hoses, batteries and programmes should be checked
before theproduct is left unmonitored for alongtime.
• Only good quality alkaline batteries should be used in theproduct.
Rechargeable batteries must not beused.
• The product must only be used theright wayup. Neverplace
theproduct upsidedown.
• The product must only be repaired by aqualified service technician.
• The product contains parts that are sensitive to static electricity.
Iftheproduct operates abnormally, it may need to be reset by taking
out thebatteries and putting them back inagain.
• The product should not be used in ambient temperatures below 0 °C
or with water having atemperature above 38 °C (100 °F).
• The product must not be used with water pressure exceeding6.9 bar
(100 psi).
• Take care not to pull or jerk thehoses connected to theproduct.
Care and maintenance
• Clean theproduct by wiping it with adampcloth. Useonly mild
cleaning agents, never solvents or corrosive chemicals.
• If theproduct is not to be used for along time:
- Set theIrrigation Mode Selector to [ OFF ].
- Remove thebatteries and store theproduct in adry, frost-free location.
• Insert new batteries at thebeginning of anew irrigation season.
Product description 4. Refit thescrews.
5. Use the [ + ] and [ ] buttons to set thecurrent time and also theirrigation
duration time while holding in the [ RUN TIME ] button.
Settings
Time
1. Hold in [ + ] and [ ] simultaneously for about 3 seconds to toggle
between a12-hour time display (AM/PM) or 24-hour time display.
2. Set thetime by holding in either the [ + ] or the [ ] button.
Irrigation duration (RUN TIME)
The RUN TIME is thelength of time thetimer releases water for irrigation.
Press [ RUN TIME ] to select one of thefollowing irrigation durations:
1, 3, 5, 7, 10, 15, 20, 25, 30, 45, 60, 75, 90, 120, 150, 180min.
Examples of irrigation programmes
1. Irrigation hose connector
2. Irrigation mode selector switch –
choose from:
- : The water supply is always onON
- : The water supply is always offOFF
- : Irrigation takes place Every day
every day
- : Irrigation takes Every second day
place every second day
- : Irrigation takes Every third day
place every third day
- : Irrigation Every second week
takes place every second week
3. Tap connector. Select thecorrect tap
connector by unscrewing therequired
number of adapters. There are three
sizes: 1/2 BSP, 3/4 BSP and 1 BSP.ʺ ʺ ʺ
4. Display screen
5. [ + − ] [ ]: Time set buttons
6. [ RUN TIME ]: Irrigation duration set button
7. START TIME”: Irrigation time, choose from:
Irrigation begins at 06:00 (6 am)
Irrigation begins at 18:00 (6 pm)
Irrigation begins at 09:00 (9 am)
Assembly
Batteries
When thebattery icon starts to flash, thewater supply to theirrigation
hose is shut off and new batteries are required.
Important
• Switch off thewater at thetap and disconnect thetimer from thetap
before replacing thebatteries.
• Changing thebatteries will reset thetimer settings.
ON OFF
E
v
e
r
y
d
a
y
E
v
e
r
y
s
e
c
o
n
d
d
a
y
E
v
e
r
y
t
h
i
r
d
d
a
y
E
v
e
r
y
s
e
c
o
n
d
w
e
e
k
ON OFF
E
v
e
r
y
d
a
y
E
v
e
r
y
s
e
c
o
n
d
d
a
y
E
v
e
r
y
t
h
i
r
d
d
a
y
E
v
e
r
y
s
e
c
o
n
d
w
e
e
k
The irrigation programme will
begin every day at 06:00 (6 am)
and 18:00 (6 pm).
The irrigation programme will begin
every second week at 09:00 (9 am).
Troubleshooting guide
The timer waters
irregularly or not atall.
Remove thebatteries and reinsert them to
reset thetimer. Referto the section.Batteries
Responsible disposal
The product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Tap connectors 1/2 , 3/4 , 1ʺ ʺ ʺ
Batteries 2×1.5 V, AA/LR6
Dimensions 190×116×61 mm
Weight 293 g
1. Remove thetwo screws in thebattery
cover on theback of thetimer.
2. Remove thebattery cover and insert
two1.5 V AA/LR6 batteries. Referto
themarkings in thebattery compartment to
ensure correct polarity.
3. Refit thebattery cover, making sure that
theend of theribbon is not caught between
thecover and thebody of thetimer. Theribbon
is there to help remove thebatteries.


Produkt Specifikationer

Mærke: Clas Ohlson
Kategori: Vandingskontrol
Model: DY907

Har du brug for hjælp?

Hvis du har brug for hjælp til Clas Ohlson DY907 stil et spørgsmål nedenfor, og andre brugere vil svare dig