Cotech CED806 Manual

Cotech Lettelse CED806

Læs nedenfor 📖 manual på dansk for Cotech CED806 (5 sider) i kategorien Lettelse. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
Ver. 20170201
LED Downlight
Art.no 36-5858 Model CED806
36-5876 CED806
36-6295 WCVC012W10
Please read theentire instruction manual before using theproduct
and save it for future reference. We reserve theright for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Safety
Theproduct is intended for indoor use only (IP44).
Installation and maintenance may only be carried out by
aqualified tradesman according to local safety regulations.
Thelight fitting must not be used if any part is damaged.
It should either be discarded or repaired by aqualified
technician.
None of theproduct’s parts are to be disassembled or
modified.
3. Unscrew theterminal block cover.
4. Hold down thecable holder on theterminal block and
insert theends of thewires. Pull gently on thepower
lead to make sure that thewires are firmly secured in
theterminal block.
5. Screw theterminal block cover back on. Thecover also
functions as astrain relief.
6. Lift thespring clips up and mount thelight in a76 mm hole.
Responsible disposal
Do not cover thedownlight with
anything that will hinder ventilation such
as foil, paper or plastic.
Make sure that thewires do not rub against sharp corners
or edges.
Therating label containing thetype designation must not
be removed or made illegible.
Theproduct must only be connected to a230 V AC
power supply.
Installation/mounting
Mounts in a76 mm diameter hole. Mounting depth: 90 mm.
Plan thelayout of thepower lead before you begin installation.
No minimum clearance from combustible surfaces is required
for LED bulbs.
1. Turn off thepower.
2. Strip theends of thewires as shown in thediagram.
Dimmable
Thedownlight can be used with atraditional
incandescent or LED bulb dimmer.
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout theentire EU. In order to
prevent any harm to theenvironment or health
hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that
thematerial can be disposed of in aresponsible
manner. When recycling your product, take it to
your local collection facility or contact theplace
of purchase. They will ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Power supply 200–240 V AC, 50 Hz
Power 11 W (36-6295: 10 W)
Protection class IP44
Light source Warm white LEDs (2,300–2,700 K), 540 lm
Beam angle 36°
Size Mounting hole diam: 76 mm
Outer ring diam: 90 mm
Mounting depth: 90 mm
GREAT BRITAIN CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
postal 10 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ


Produkt Specifikationer

Mærke: Cotech
Kategori: Lettelse
Model: CED806

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech CED806 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Cotech Manualer

Cotech

Cotech IPC15A3A-D3 Manual

30 August 2024
Cotech

Cotech EMP701MD Manual

27 August 2024
Cotech

Cotech IPC30SA1A Manual

16 August 2024
Cotech

Cotech JF4011G Manual

14 August 2024
Cotech

Cotech RP120W Manual

10 August 2024
Cotech

Cotech 36-4137 Manual

8 August 2024
Cotech

Cotech WCVC012W10 Manual

5 August 2024
Cotech

Cotech TOE-12 Manual

5 August 2024
Cotech

Cotech 36-6078 Manual

5 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer