Cotech IPC30SA1A Manual

Cotech Lettelse IPC30SA1A

Læs nedenfor 📖 manual på dansk for Cotech IPC30SA1A (4 sider) i kategorien Lettelse. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
UNITED KINGDOM
www.clasohlson.co.uk
Ver. 20220406
LED Floodlight
Art.no 36-7617-1, 36-7617-2, 36-7618-1, 36-7618-2
Model IPC15A1A-B, IPC15A1A-W, IPC30SA1A-B, IPC30SA1A-W
Please read theentire instruction manual before use and then save it for
future reference. Wereserve theright for any errors in text or images and any
necessary changes made to technicaldata. Intheevent of technical problems or
other queries, please contact our Customer Services.
Safety
This product is extremely bright. Donot look directly into thelight, doing so
could cause eye damage.
Never let children play with theproduct.
The product should only be connected to an earthed 230 V AC, 50 Hz
mains outlet.
Theproduct must not be used in rooms where explosive gases or liquids are
used or stored.
Treat theproduct with care and do not subject it to shocks or impacts.
Never immerse theproduct in water or other liquid.
Theproduct must not be covered.
Never try to open thehousing, repair or modify theproduct in anyway.
Never use theproduct if your hands are moist orwet.
Never use theproduct if it, its mains lead or plug is damaged in anyway.
All repairs must be carried out by qualified service technicians using genuine
spareparts.
Themains lead should be checked regularly. Ifthemains lead is damaged in
any way it must be replaced by aqualified electrician.
Installation
Fasten thefloodlight to afirm, level surface.
Do not mount thefloodlight where there is arisk of it falling into water or
other liquids.
Warning
Make sure that thewall has no concealed electrical wiring, gas or water
pipes before drilling/screwing.
Make sure that thepower supply to thefloodlight is switched off/isolated.
Thefloodlight should be connected to apower supply protected by asafety
device such as aresidual current circuit breaker/residual current device
(RCCB/RCD).
TheLED module in thelighttting must not be replaced by anyone other
than aqualified electrician.
Specifications
36-7617-1
Rated voltage 220–240V AC, 50/60Hz
Power 15W
Colour Black
Light source COB-LED, 1400 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 15×12×4.2cm
36-7617-2
Rated voltage 220–240V AC, 50/60Hz
Power 15W
Colour White
Light source COB-LED, 1400 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 15×12×4.2cm
36-7618-1
Rated voltage 220–240V AC, 50/60Hz
Power 30W
Colour Black
Light source COB-LED, 2600 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40°C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 17.5×14.5×5cm
36-7618-2
Rated voltage 220–240V AC, 50/60Hz
Power 30W
Colour White
Light source COB-LED, 2600 lm (non-replaceable)
Colour temperature 4000K
Colour rendition > 80 Ra
Beam angle 120°
IP rating IP65
Protection class Class 1 (theproduct must be earthed)
Operating temperature −20 to 40 °C
Connecting cable 80 cm, H05RN-F3G1.0 mm²
Size 17.5×14.5×5cm
1. Use thewall bracket as atemplate
and mark out where thescrew holes
are to be drilled.
Note: You don’t need to detach
thewall bracket from thefloodlight,
it pivots to make it easier to mark
out holes for drilling and screwing in
mounting screws.
2. Use anappropriate type of screw
for thewall material and attach
thebracket to thewall.
3. Tilt thefloodlight to thedesired angle
and tighten thescrews fastening
thewall bracket to thefloodlight.
Care and maintenance
Clean thefloodlight by first switching it off and then wiping it with adrycloth.
Important
If theglass on thefront of thefloodlight is damaged, it must be replaced before
thefloodlight is usedagain. Thefloodlight must not be used if theglass is
damaged or missing.
Responsible disposal
This symbol indicates that this product should not be
disposed of with general householdwaste. Thisapplies
throughout theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by incorrect
waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible
manner. Whenrecycling theproduct, take it to your local
collection facility or contact theplace of purchase. Theywill
ensure that theproduct is disposed of in anenvironmentally
sound manner.


Produkt Specifikationer

Mærke: Cotech
Kategori: Lettelse
Model: IPC30SA1A

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech IPC30SA1A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Cotech Manualer

Cotech

Cotech IPC15A3A-D3 Manual

30 August 2024
Cotech

Cotech EMP701MD Manual

27 August 2024
Cotech

Cotech IPC30SA1A Manual

16 August 2024
Cotech

Cotech JF4011G Manual

14 August 2024
Cotech

Cotech RP120W Manual

10 August 2024
Cotech

Cotech 36-4137 Manual

8 August 2024
Cotech

Cotech WCVC012W10 Manual

5 August 2024
Cotech

Cotech TOE-12 Manual

5 August 2024
Cotech

Cotech 36-6078 Manual

5 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer