Cotech HK-LB644A-1TSV Manual

Cotech Lettelse HK-LB644A-1TSV

Læs nedenfor 📖 manual på dansk for Cotech HK-LB644A-1TSV (5 sider) i kategorien Lettelse. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/5
UNITED KINGDOM • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
1
6
5
3
2
4
Ver. 20180917
Tripod Work Light
Art.no 18-1327 Model HK-LB644A-1TSV(UK)
36-6502 HK-LB644A-1TSV
Please read theentire instruction manual before using theproduct and then
save it for future reference. We reserve theright for any errors in text or images
and any necessary changes made to technical data. If you have any questions
concerning technical problems please contact our Customer Services.
Safety
• Make sure that theelectrical socket that theproduct is plugged into is
easily accessible in case it and theconnected product need to be quickly
disconnected from themains electricity.
• Do not connect products of this type to each other.
• Do not cover theproduct.
• TheLEDs in this work light have avery intensive light output. Do not let
children play with thework light. Do not look directly into thelight or direct
thelight into another person’s eyes, doing so could cause eye damage.
• Do not touch thehousing or glass of thework light when it is switched on
– risk of burn injury.
• Do not install thework light near flammable materials or surfaces.
• Do not cover thework light.
• Do not dismantle or modify thework light.
• Themains lead should be checked regularly. Never use thework light if
themains lead or plug is damaged.
• Always unplug thework light from thepower point when it is not in use.
Pull theplug, not thelead.
• Themains lead must be changed if damaged. This is to prevent therisk of
electric shock or fire and should only be carried out by themanufacturer,
authorised service facility or aqualified tradesman.
• Thework light is suitable for use in temperatures between −20 and +40 °C.
• Thework light should be connected to anearthed 230 V power point.
• Before using theproduct, check that thehousing, glass, power switch,
mains lead and plug are all undamaged. Any fault or damage must be
repaired immediately by aqualified electrician before thework light is used.
• Do not use thework light near combustible or explosive liquids, solids or gases.
• Thework light must only be used when it is mounted on theincluded base
and bracket assembly. Thework light must not be mounted on awall or ceiling.
• Treat thework light with care and do not subject it to shocks or impacts.
• Thework light must not be immersed in water or other liquid.
Product description Power take-off sockets
Power tools with acombined total power load of 2300W can be connected to
thetwo power sockets on therear of thework light. Thepower switch Note:
(4) only controls thework light, not thepower take-off sockets on therear of
thelamp housing.
Care and maintenance
Unplug thework light and allow it to cool before cleaning.
Clean thelight using asoft, damp cloth. Use amild detergent.
Never use solvents or strong, abrasive cleaning agents.
Responsible disposal
This symbol indicates that this product should not be disposed
of with general household waste. This applies throughout
theentire EU. In order to prevent any harm to theenvironment
or health hazards caused by incorrect waste disposal,
theproduct must be handed in for recycling so that thematerial
can be disposed of in aresponsible manner. When recycling
your product, take it to your local collection facility or contact
theplace of purchase. They will ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Voltage 220–240V, 50/60Hz
Power 30W
Light source COB/Bridgelux LED
Luminous flux 3000 lm
Colour temperature 4000 K
Colour rendition > 80 Ra
Beam angle 120°
Ingress protection IP44
Power sockets Max 2300W (10A) total load
Protection class Class 1 (thework light must be earthed)
Cable 2.5m rubber clad cable with earthed plug
(H07RN-F 3 × 1.5 mm²)
Size Lamp housing: 220×185×210 mm,
tripod height: max 1.8, min 0.8 m
1. Tripod
2. Locking screws (star knob)
3. Lamp housing with bracket
4. Power switch
5. 230V power take-off socket
6. Friction lock height adjustment,
twist anticlockwise to unlock,
clockwise to lock.
3. Connect themains lead to a230 V power point.
Assembly
Fit thelamp housing (3) onto thetripod (1) and tighten thescrew (2).
Operating instructions
1. Open out thelegs of thetripod and
lock them in place by tightening
thethumbscrew.
2. To adjust thelength of thetripod:
undo thefriction lock (6) by turning
it anticlockwise; lock it by turning it
clockwise.
4. Adjust thelamp housing to thedesired angle.
5. Switch thework light on using thepower switch (4).
6. Switch off and unplug thework light after use.
Thelight source contained in this luminaire shall only
be replaced by themanufacturer or his service agent
or asimilar qualified person.

Produkt Specifikationer

Mærke: Cotech
Kategori: Lettelse
Model: HK-LB644A-1TSV

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech HK-LB644A-1TSV stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lettelse Cotech Manualer

Cotech

Cotech IPC15A3A-D3 Manual

30 August 2024
Cotech

Cotech EMP701MD Manual

27 August 2024
Cotech

Cotech IPC30SA1A Manual

16 August 2024
Cotech

Cotech JF4011G Manual

14 August 2024
Cotech

Cotech RP120W Manual

10 August 2024
Cotech

Cotech 36-4137 Manual

8 August 2024
Cotech

Cotech WCVC012W10 Manual

5 August 2024
Cotech

Cotech TOE-12 Manual

5 August 2024
Cotech

Cotech 36-6078 Manual

5 August 2024
Cotech

Cotech IVY-405-11W Manual

4 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Goobay

Goobay 30780 Manual

15 Oktober 2024
Livarno

Livarno IAN 94799 Manual

15 Oktober 2024
Astro

Astro Denia Manual

13 Oktober 2024
Brennenstuhl

Brennenstuhl HARLON 2000 M Manual

8 Oktober 2024
Neewer

Neewer SRP18C Manual

7 Oktober 2024
Crivit

Crivit IAN 283689 Manual

7 Oktober 2024
BeamZ

BeamZ 150.590 Manual

5 Oktober 2024
BeamZ

BeamZ 150.780 Manual

5 Oktober 2024
BeamZ

BeamZ 150.371 IGNITE180 LED Spot Manual

5 Oktober 2024
BeamZ

BeamZ 151.341 BT430 PAR Manual

5 Oktober 2024