Cotech JF8100-1A Manual

Cotech Lettelse JF8100-1A

Læs nedenfor 📖 manual på dansk for Cotech JF8100-1A (5 sider) i kategorien Lettelse. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/5
GREAT BRITAIN • CUSTOMER SERVICE tel. 0845 300 9799 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.com/uk
1 2 3
Ver. 20140704
Rechargeable 10 W
LED Work Light
Art.no 36-5612 Model JF8100-1A
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright for any
errors in text or images and any necessary changes made to
technicaldata. In theevent of technical problems or other queries,
please contact our Customer Services.
Safety
• Never let children use theproduct without adult supervision.
Neverlook directly into thelight; it could damage your eyesight.
• Do not subject theproduct to knocks, strong vibrations or
high temperatures. Hightemperatures can damage thebulb.
• Do not use theproduct if thesafety glass, housing or stand is
damaged in anyway.
• Never cover theproduct.
• Never use theproduct in thevicinity of explosive gases or liquids.
• TheLED bulb cannot be replaced.
• Theproduct must not be dismantled or modified in anyway.
• Theproduct must only be used on thesupplied stand, it must
not be mounted on awall or ceiling.
Buttons and functions
Care and maintenance
• Theexterior of theproduct can be cleaned by wiping with
adampcloth. Useonly mild cleaning agents, never solvents
or corrosive chemicals.
• If theproduct is not used for anextended period, thebattery
should be fully charged every second month to maintain its
capacity.
Troubleshooting guide
Thework light
does not comeon.
Thebattery might beflat. Recharge
thebattery.
Thebattery does
not charge.
• Check that themains adaptor/12 V
car charger is connected properly
to both thework light and electrical
socket.
• Make sure that thecable of
themains adaptor/12 V car charger
is undamaged.
• Is theelectrical socket that
themains adaptor/12 V car charger
is plugged intolive?
Disposal
This product should be disposed of in accordance with local
regulations. Ifyou are unsure how to proceed, contact your
localcouncil.
Specifications
Power 10W
Operating time approx. 3hours when fully charged
Charging time 5–6hours
Colour temperature 4000K
Lumens 600
IP rating IP54
Charged by 230 V AC (mains) or 12 V DC (car)
Size with handle
extended (L×W×H) 16.5×18×25cm
Weight 985g
Operating instructions
Charging
Plug adaption for different countries
Theplug of themains adaptor might need adapting to suit
theelectrical sockets used in your country.
1. Depress thecatch and detach thecontact
pin plate from thebody of themains adaptor.
2. Attach thedesired contact pin plate to
themains adaptor (theknurled surface lines
up with thecontact inside theadaptor).
3. Ensure that thecatch snaps into place and
holds thecontact pin plate on securely.
• If thebattery is already partly charged and thework light shines
thefirst time it is switched on, leave thework light on until
thelight goes out and then recharge thebattery completely.
• If thework light does not come on when it has just been
unpacked (discharged battery), fully charge thebattery before
using thework light for thefirsttime.
• Use only theincluded mains adaptor for charging
theworklight.
230 V mains power
1. Connect themains adaptor to thecharge cable input socket(1)
on thework light and to anavailable electrical socket. TheLED
indicator (2) shines red to show that thebattery is being charged.
2. TheLED indicator shines green once thebattery is fully charged.
12 V car power
Connect the12 V car charger cable to thecharge cable input socket
(1) on theworklight. Theincluded 12 V car charger is only intended
as atemporary charger as it does not always fully charge thebattery.
Note: Ifthework light is charged from the12 V socket of acar
with theengine switched off, thebattery will only be charged to
about 70 % (theLED will shine red all thetime).
If thework light is charged in acar with theengine running,
thecharging time will be shorter and thebattery will charge to
100%,i.e. theLED indicator will change from red togreen.
Switching the light on/off
1. Thework light is switched on by setting the [ 50 % OFF 100% ]
switch to either or .50 % 100 %
2. Thework light is switched off by setting theswitch to
themiddle position, marked .OFF
1. Charging input socket for theincluded charge cables
2. LED charge indicator
3. [ 50 % OFF 100 % ] 3-position switch: 50 % brightness, off,
100 % brightness

Produkt Specifikationer

Mærke: Cotech
Kategori: Lettelse
Model: JF8100-1A

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech JF8100-1A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lettelse Cotech Manualer

Cotech

Cotech IPC15A3A-D3 Manual

30 August 2024
Cotech

Cotech EMP701MD Manual

27 August 2024
Cotech

Cotech IPC30SA1A Manual

16 August 2024
Cotech

Cotech JF4011G Manual

14 August 2024
Cotech

Cotech RP120W Manual

10 August 2024
Cotech

Cotech 36-4137 Manual

8 August 2024
Cotech

Cotech WCVC012W10 Manual

5 August 2024
Cotech

Cotech TOE-12 Manual

5 August 2024
Cotech

Cotech 36-6078 Manual

5 August 2024
Cotech

Cotech IVY-405-11W Manual

4 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Gemini

Gemini GDL13T Manual

16 December 2024
Gemini

Gemini GDL250 Manual

16 December 2024
Fuzzix

Fuzzix Orion Manual

16 December 2024
BeamZ

BeamZ Phoenix 1200 Manual

15 December 2024
Ranex

Ranex Zoe Manual

15 December 2024
Ranex

Ranex Mia Manual

15 December 2024
Ranex

Ranex Carlo Manual

15 December 2024
Vimar

Vimar 14394 Manual

15 December 2024
Vimar

Vimar 14393 Manual

15 December 2024
Vimar

Vimar 16440 Manual

15 December 2024