Cotech S105A-P-20W Manual

Cotech Lettelse S105A-P-20W

Læs nedenfor 📖 manual på dansk for Cotech S105A-P-20W (5 sider) i kategorien Lettelse. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
GREAT BRITAIN • CUSTOMER SERVICE
contact number: 08545 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
ENGLISH
Ver. 20131009
20 W LED Work Light
Art.no 18-2696 Model S105A-P-20W-UK
36-4846 S105A-P-20W
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our Customer Services.
Safety
• Read these instructions carefully before using the product.
• Never let children use the product without adult supervision.
• Never look directly into the light; it could damage your eyesight.
• Always unplug the light when it is not in use. Pull the plug, not the lead.
• Protect the work light from dust, water and extreme temperatures. High temperatures can damage the bulb.
• Before use, check that the plug, lead, diffuser and casing are all undamaged. If any damage is detected, do not
use the light until it has been repaired by a qualified technician.
• If the mains lead is damaged, to prevent any risk of fire or electrocution, it must only be replaced by
a qualified electrician.
• Never cover the work light. Never use the work light in the vicinity of explosive gases or liquids.
• The LED cannot be replaced.
• This product must not be dismantled or modified in any way.
• The light must only be used on the supplied stand, it must never be mounted on a wall or ceiling.
• Treat the light carefully.
• The light must only be connected to an earthed electrical socket.
• Before using the light, make sure that the supply voltage corresponds to the light’s rated voltage.
Operation
1. Place the stand on a firm surface where it cannot tip over.
2. Adjust the tilt angle.
3. Plug the light into a wall socket.
Care and maintenance
• Never use strong cleaning agents/solvents to clean the product. Clean the light using a soft cloth.
• Always unplug the light before cleaning it.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Specifications
Voltage 220–240 V AC, 50 Hz
Input current 0.105 A
Power 20 W
Power factor 0.9
Light source 1 LED. The light source is non-replaceable.
Lead 1.8 m rubber-clad cable H05RN-F 3×1 mm²
IP class IP54
Class 1
Luminous flux 1300 lm
Beam angle 130°
Tempered glass size 175×135×4 mm


Produkt Specifikationer

Mærke: Cotech
Kategori: Lettelse
Model: S105A-P-20W

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech S105A-P-20W stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Cotech Manualer

Cotech

Cotech IPC15A3A-D3 Manual

30 August 2024
Cotech

Cotech EMP701MD Manual

27 August 2024
Cotech

Cotech IPC30SA1A Manual

16 August 2024
Cotech

Cotech JF4011G Manual

14 August 2024
Cotech

Cotech RP120W Manual

10 August 2024
Cotech

Cotech 36-4137 Manual

8 August 2024
Cotech

Cotech WCVC012W10 Manual

5 August 2024
Cotech

Cotech TOE-12 Manual

5 August 2024
Cotech

Cotech 36-6078 Manual

5 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer