Cuisinart CSG-700 Manual

Cuisinart Termometer CSG-700

Læs nedenfor 📖 manual på dansk for Cuisinart CSG-700 (2 sider) i kategorien Termometer. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

INSTRUCTION MANUAL CUISINART WIRELESS

DUAL PROBE GRILLING THERMOMETER – CSG-900

Introduction

Congratulations on your purchase of the Cuisinart Wireless Dual Probe Grilling Thermometer, a

programmable radio frequency food thermometer. You will now be able to remotely monitor the

temperature of grilling food and the temperature inside your grill from anywhere in your home.

We’re Here To Help

Any questions you may have can be answered by email grilling@thefulhamgroup.com or

phone 866-994-6390

Components

1. 1 – Receiver unit

2. 1 – Transmitter unit

3. 1 – Detachable stainless steel FOOD probe

4. 1 – Detachable stainless steel BARBECUE probe with clip

5. 4 – AAA batteries.

Receiver Features

• LCD (Liquid Crystal Display) – Displays all icons, temperature and time.

• CLIP – Removable clip allowing you to have the receiver hang.

• BATTERY COMPARTMENT – Holds 2 AAA batteries.

• STAND (Removable Clip) – Swings out and allow you to stand the receiver on tabletop.

Buttons

1. HI/HR – In THERMOMETER MODE, press and hold until the digits ash; press to increase the

maximum BARBECUE temperature. Press and hold for 2 seconds to increase 10 degrees per second.

In TIMER MODE, when the TIMER is stopped, press to set the hour. Press and hold for 2 seconds to

increase 10 hours per second.

2. – In THERMOMETER MODE, press and hold until the digits ash, press to increase the LO/MIN

minimum BARBECUE temperature. Press and hold for 2 seconds to increase 10 degrees per second.

In TIMER MODE, when the TIMER is stopped, press to set the minute. Press and hold for 2 seconds to

increase 10 minutes per second.

3. LIGHT/MODE – Press to turn on the LCD back light for 5 seconds. Press and hold for 2 seconds to

select THERMOMETER MODE or TIMER MODE.

4. HI/CLEAR – In THERMOMETER MODE, press and hold until the digits ash, press to increase the

maximum FOOD temperature. Press and hold for 2 seconds to increase 10 degrees per second. In

TIMER MODE, when the timer is stopped, press to clear the timer setting back to 0:00.

5. ALERT, °C /°F, START/STOP – Press and hold for 2 seconds to switch between °C and ºF display. In

THERMOMETER MODE, press to turn ON/OFF the alarm. In TIMER MODE, press to start or stop the

timer countdown or count up.

6. Power – Press to turn ON/OFF the receiver.

Transmitter Features

LCD (Liquid Crystal Display) – displays temperature of both FOOD and BARBECUE. It will automatically

switch between FOOD and BARBECUE displays. (Note: Press the re-sync button to switch the

display between °C and ºF.)

WIRE STAND – Allows you to stand the receiver on tabletop or it can be reversed and used as a

hanger.

BATTERY COMPARTMENT – holds 2 AAA batteries.

FOOD – Plug-in for stainless steel FOOD probe.

BARBECUE –Plug-in for stainless steel BARBECUE probe.

Buttons

1. Re-sync – Transmit manually, terminates the auto registration process. Press and hold for

2 seconds to register the radio frequency with the receiver.

Press to select the temperature unit between °C and ºF.

2. – Press to turns ON/OFF the transmitter. Power

Installing batteries

Open the battery compartment of the receiver and insert two “AAA” batteries with correct polarity.

Open the battery compartment of the by removing the two small screws and insert two “AAA” batteries

with correct polarity.

Registering Receiver & Transmitter

The Barbecue Thermometer needs the receiver to register and lock in the radio frequency signal from

the transmitter, every time the device is turned on. Proceed as follows to register.

1. Plug the stainless steel probe sensors into the corresponding plug ins of the transmitter.

Note: The FOOD probe is 6 inches long with pointed end while the BARBECUE probe is 2 inches long

with a grill rack clip.

2. Turn on the receiver by pressing the power button 2 seconds.

3. Turn on the transmitter by pressing the power button 2 seconds, found on the back of the transmitter.

This needs to be done within seconds of turning on the receiver in order for the receiver to 120

receive the Registration Code from the transmitter. If it doesn’t beep within 5-10 seconds and the “---”

shown on LCD was ashing or is solid, press the power button 2 seconds to turn OFF the Transmit-

ter and then turn back ON. Pressing and holding the RESYNC button for 2 seconds will get the

same result as turning the transmitter OFF and then ON.

4. Registration is completed when the unit beeps and the probe temperatures will appear on LCD.

Loss link alert

If the receiver is taken out of range or there is abnormal external interference or after shutting OFF the

transmitter, the receiver may not be able to receive the transmission from the transmitter. If this happens

over 4 minutes, the unit will alert you by beeping for every 4 seconds to tell you to re-sync the once

signal. Pressing any button on Receiver will stop the Loss Link beep.

To regain transmission signal, move the receiver close to the transmitter, turn OFF the Receiver and then

turn back ON. Press and hold the RESYNC button of the transmitter 2 seconds within 120 seconds

and the temperatures should appear on the receiver display.

Remarks:

According to FCC Part 15.231(e) rule, the RESYNC button can be activated once every 12 seconds

manually. If the re-synchronization doesn’t succeed 1st time, wait for 12 seconds before pressing &

hold the RESYNC button again. Or you can press and hold the power button 2 seconds to turn OFF the

Transmitter and then turn back ON again. It will produce the same result.

THERMOMETER MODE

In thermometer mode, the LCD will show a FOOD icon in the upper part of the display and a

BARBECUE icon in the lower part of the display. You can follow processes below to gain your

desired settings.

Setting HI (Maximum) FOOD Temperature

1. Press the HI/ CLEAR button to display the maximum FOOD temperature, which will only be

displayed for 5 seconds. The FOOD temperature range is 32 ºF - 572 ºF and the default setting is

176 ºF.

2. Press and hold the HI/ CLEAR button until the digits ash.

3. Press the HI/ CLEAR button to set your desired temperature. It will increase one with each press.

Press and hold the HI/ CLEAR button to fast increase.

4. Press the LIGHT/MODE button to conrm the setting.

Note: Press HI/CLEAR to read your set maximum FOOD temperature.

To destroy harmful bacteria like Salmonella and E Coli the USDA recommends the following minimum

internal temperatures:

• (Beef, Veal, Lamb Steaks & Roasts and Fish) to be 145 ºF

• (Egg Dishes, Pork and Ground Beef Veal & Lamb) to be 160 ºF

• (Turkey, Chicken & Duck Whole, Pieces & Ground) to be 165 ºF

Setting HI (Maximum) BARBECUE Temperature

1. Press the HI/HR button to display the maximum BARBECUE temperature, which will only be

displayed for 5 seconds. The maximum BARBECUE temperature range is 140 ºF – 572 ºF and the

default setting is 176 ºF.

Note: The unit will not allow you to set the maximum BARBECUE temperature below the minimum

BARBECUE temperature.

2. Press and hold the HI/HR button until the digits ash.

3. Press the HI/HR button to set your desired temperature. It will increase one with each press. Press

and hold the HI/ CLEAR button to fast increase.

4. Press the LIGHT/ MODE button to conrm the setting.

Note: Press the HI/HR button to read your set maximum BARBECUE temperature.

Setting LO (Minimum) BARBECUE Temperature

1. Press the LO/MIN button to display the minimum BARBECUE temperature, which will only be dis-

played for 5 seconds. The minimum BARBECUE temperature range is 32 ºF – 554 ºF and the default

setting is 50 ºF.

Note: The unit will not allow you to set the minimum BARBECUE temperature above the maximum

BARBECUE temperature.

2. Press and hold the LO/MIN button until the digits ash.

3. Press the LO/MIN button to set your desired temperature. It will increase one with each press. Press

and hold the LO/MIN button to fast increase.

4. Press the LIGHT/MODE button to conrm the setting.

Note: Press the LO/MIN button to read your set minimum BARBECUE temperature.

Activating the temperature alarm

You can press the ALERT, °C /°F, START/STOP button to activate the temperature alarm for BARBECUE

and FOOD. The alarm icons will appear beneath the FOOD and BARBECUE icons. The

receiver will beep with the alarm icon and probe temperature ashing if:

a) The actual FOOD temperature has exceeded your set maximum FOOD temperature. (Beep twice in

every second)

b) The actual BARBECUE temperature has exceeded your set maximum BARBECUE temperature. (Beep

once in every second)

c) The actual BARBECUE temperature has fallen below your set minimum BARBECUE temperature.

(Beep once in every second)

Produkt Specifikationer

Mærke:	Cuisinart
Kategori:	Termometer
Model:	CSG-700

Har du brug for hjælp?

Hvis du har brug for hjælp til Cuisinart CSG-700 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termometer Cuisinart Manualer

Cuisinart CGWM-070 Manual

19 August 2024

Cuisinart CSG-466 Manual

13 August 2024

Cuisinart CSG-700 Manual

13 August 2024

Cuisinart CSG-625 Manual

10 August 2024

Termometer Manualer

Nyeste Termometer Manualer

Medel No Contact Manual

21 November 2024

Neno Medic T02 Manual

19 November 2024

PCE Instruments PCE-T312N Manual

31 Oktober 2024

PCE Instruments PCE-T 330 Manual

31 Oktober 2024

PCE Instruments PCE-T 394 Manual

22 Oktober 2024

PCE Instruments PCE-T 318 Manual

22 Oktober 2024

PCE Instruments PCE-IR 1300 Manual

16 Oktober 2024

PCE Instruments PCE-FOT 10 Manual

16 Oktober 2024

PCE Instruments PCE-895 Manual

16 Oktober 2024

PCE Instruments PCE-PTH 10 Manual

16 Oktober 2024