CyberPower CPBC5200T Manual

CyberPower power bank CPBC5200T

Læs nedenfor 📖 manual på dansk for CyberPower CPBC5200T (2 sider) i kategorien power bank. Denne guide var nyttig for 35 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

PACKAGE CONTENTS

• USB Battery Pack (CPBC5200T Series)

• User Guide

SPECIFICATIONS

Battery Capacity: 5200mA

Rated Input: DC 5V 1A

Rated Output: DC 5V 2.1A

PC Charging time: ~6.5 Hrs

Dimension: 3.7 x 2.5 x 1.0 inch

Weight: 5.57 oz

Environment:

Storage: 14 to 122°F (-10 to 50°C)

Operation: 32 to 104˚F (0 to 40˚C)

IMPORTANT! PRIOR TO FIRST USE

The CPBC5200T Series is packaged in a protection mode

for shipping. Prior to use, connect the CPBC5200T Series

to a USB power source to set it to normal mode and the

suggested a full 10-hour charge.

TO CHARGE THE BATTERY PACK

Charge the USB Battery Pack by attaching the USB charging

connector to any powered USB port, including but not limited

to a desktop computer, laptop, USB powered hub or USB

wall charger.Recharge the CPBC5200T Series every 3

months when not use to ensure the best battery performance.

The battery capacity may decline after 300 times usage.

SAFETY PRECAUTION

Before using the USB Battery Pack, please read the following

warnings carefully. Use the product according to the

procedures described in this manual. Failure to follow these

safety precautions may result in fire, explosion, electrical

shock or other dangers.

1. Do not disassemble this product, or any of its parts.

2. Store between 14 to 122°F (-10 to 50°C).Operate between

32 to 104°F(0 to 40°C).

3. Do not immerse this product in water or other liquids, as

such use may result in fire or electrical shock. If water or

other liquids enter the battery interior, unplug the product

immediately from any attached power source or device.

4. Do not use this product with wet hands. Moisture in or on

this product may result in electrical shock.

5. Do not expose this product to direct flame or leave it in an

overheated condition, as the battery may explode.

6. Store this product in a cool and dry environment when not

in use.

7. Do not puncture this product. Puncturing the battery may

cause the release of harmful substances.

8. It is normal for the USB Battery Pack to become warm

during charging.

9. Keep this product out of the reach of children. Ensure that

all users read these warnings and instructions before using.

10. Please recycle USB Battery Pack in accordance with local

environmental laws and regulations.

LEGAL NOTICES

FCC Part 15

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency

energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

If the LED indicator extinguishes automatically during the

charging process, press the button to revert.

FCC WARNING

Changes or modifications not expressly approved by the

party responsible for compliance with the FCC Rules

could void the user’s authority to operate this equipment.

LIMITED PRODUCT WARRANTY

CyberPower offers limited product warranty for the

hardware of the USB Battery Pack* and the product is

free from material and manufacturing defects for one year.

(*battery excluded) A reasonable purchase proof with

date must be provided when submission. CyberPower's

sole responsibility is to repair or replace the product if a

material or manufacturing defect results in product failure

during its normal use. The warranty is void if the product is

damaged due to abuse, alteration, misuse, negligence,

incorrect voltage supply, air/water pollution, accidents and

natural disasters.

INTRODUCTION

The USB Battery Pack (CPBC5200T Series) is a

rechargeable lithium-ion battery that is designed for

powering up to two mobile devices such as phones, MP3

players, tablets, and handheld gaming devices while away

from other power sources.

FEATURES

- Compact and portable design

- Built in USB power cable

- Battery life indicator

PRODUCT VIEW:

CyberPower Systems, Inc.

www.cpsww.com

USB BATTERY PACK

USER GUIDE

Model: CPBC5200T Series

TROUBLE SHOOTING

K09-0000175-00

POWER

YOUR DEVICES

CHARGE THE

POWER PACK

PAD

USB

Flash Light White Light

ITEMNO. DESCRIPTION

Discharge Display Switch

Charging LED Indicator Switch

Power Off

Flash Light ON / OFF

LED lndicator

5V USB Output Port

Charger Input Port

5V Micro USB Output Port

Press the button

Press and hold 3 seconds

Press twice

As the “LED INDICATOR”

table showing

5V/2.1A(max) USB Port output

5V/1A USB port input

5V/2.1A(max.) Micro USB

port output

CONDITIONNO. LED INDICATION

Battery Life Indicator

Battery Failure

Overload

Low Battery

Four LEDs represent 25%,

50%, 75% and 100% battery

life from left to right side.

The first and forth LEDs are

flashing simultaneously.

All four LEDs are flashing

simultaneously.

The first LED is flashing rapidly.

LED INDICATOR

Micro

Output Port

Problem Possible Cause Solution

USB Battery

Pack does

not power

the device

C.The battery pack is

charging the device

and the power source

is charging the

battery pack

simultaneously.

The device can’t be charged

when the power source is

charging the battery pack.

The solution is to remove the

device from the battery pack.

Power bank

does not

charge

a.Incorrect connection

between charger and

USB Battery Pack.

b.No power from the

source.

C.Short Circuit of

battery pack product

Re-attach the USB connector

to the USB port.

a.Check that power is provided

to the USB port.

b. The battery pack has a low

charge. Recharge the

power battery pack.

Reset the battery pack.

Problem Possible Cause Solution

USB Battery

Pack does

not power

the device

a.The power of device

is over specification.

b.The battery is out

of power

Check the power specification

of the device before charging

with the CPBC5200T Series.

Charge the battery pack via a

USB port.

Micro USB to Apple charger tip

5V Micro USB Output Port

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	power bank
Model:	CPBC5200T
Tænd-/slukkontakt:	Ja
Bredde:	94 mm
Dybde:	64 mm
Højde:	25.4 mm
Vægt:	158 g
Antal pr. pakke:	1 stk
Produktfarve:	Hvid
Batterispænding:	3.7 V
Batterikapacitet:	5200 mAh
Lampe type:	LED
Indbygget lommelygte:	Ja
Batteriteknologi:	Lithium-Ion (Li-Ion)
Relativ luftfugtighed ved drift (H-H):	-20 - 60 %
Driftstemperatur (T-T):	0 - 40 °C
Pakketype:	Hængende boks
Certificering:	FCC, CE, MFi
LED-indikatorer:	Ja
Udgangsspænding:	5 V
Udgangsstrøm:	2.1 A
Lysfarve:	Hvid
Bæredygtighedscertifikater:	RoHS
Indgangsspænding:	5 V
Opladningskilde:	USB
Hurtig opladning:	Ingen
Antal enheder der er tilsluttet samtidigt (maks.):	1
Oplader, kompabilitet:	Universel
Inputgrænseflade:	Micro-USB
USB A udgangsporte:	1
Antal Micro USB-stik:	1
Indgangsstrøm:	1 A
Antal opladningscyklusser:	500
USB opladningsstik:	Ja
Batteri, opladningstid (USB):	6.5 t
Micro-USB-stik:	Ja
Power bank & enhed oplades på en gang:	Ja