D-Link DES-6505 Manual

D-Link Audio/video konverter DES-6505

Læs nedenfor 📖 manual på dansk for D-Link DES-6505 (13 sider) i kategorien Audio/video konverter. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/13

Introduction

This Quick Installation Guide gives step- -step by

instructions for installing modules in the D-Link

DES-6500 Modular Ethernet Switch. This switch is

used to connect an entire department to your

Ethernet backbone. For more detailed information

about the switch, its components, making network

connections, configuration and technical

specifications, please refer to the User’s Guide

included in Adobe Acrobat format on the CD-ROM

that was included with the switch.

Step 1 Unpacking –

Please ensure your box contents included:

 One switch networking module

 This Quick Installation Guide

Step 2 - Hardware Installation

The DES-6500 ships as a base unit which includes:

 DES-6501 Backplane Chassis –

provides electrical power to and conveys

transmissions between modules

 DES-6502 CPU Module Switching and –

management module located in the

uppermost slot

 DES-6 Redundant Power Supply 511

Module located in one of the two large –

slots at the bottom of the switch

Networking modules sold separately include:

 DES-6502 U module CP

 DES-6504 -port 100BASE-FX SFF Fast 12

Ethernet Switch module

 DES-6505 8-port 1000BASE-SX SC

Gigabit Ethernet Switch module

 DES-6506 -port RJ45 Patch Panel 24

module

 DES-6507 -port 1000BASE-T + 2-port 12

Combo SFP slot Gigabit Ethernet Switch

module

 D -ES 6508 16-port

10BASE-T/100BASE-TX (RJ45) Fast

Ethernet Switch module

 DES-6509 12-port Mini GBIC Gigabit

Ethernet Switch module

 DES-6510 24-port 10/100 RJ21Switch

module

 DES-6511 Redundant Power Supply

module

Carefully follow the procedures defined below to

install modules in the switch. Networking modules

can be installed in any unused slot with the

exception of the DES-6502 CPU module which must

be installed in the uppermost slot (only).

1. Remove a blank slot cover.

2. Carefully slide a module into the slot, making

sure that its sides are inside the guide rails.

3. When the module reaches the back of the chassis,

push gently but firmly to connect the rear

sockets of the module to the backplane. Ensure

that the module is completely inserted into the

chassis such that its front panel is flush with the

front panel of the chassis.

4. Tighten the two large module screws to ensure

that the module is held firmly in place.

Note: Networking modules are hot-swappable,

meaning they can be added and removed while power

to the switch is ON. The CPU module however, is

NOT hot-swappable. Removing or inserting the CPU

module while the power is on may cause irreparable

damage to the module and/or to the switch itself.

Further, make sure you have unplugged the power

cord from the removable power supply module before

inserting or removing it from the switch.

Produkt Specifikationer

Mærke:	D-Link
Kategori:	Audio/video konverter
Model:	DES-6505

Har du brug for hjælp?

Hvis du har brug for hjælp til D-Link DES-6505 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Audio/video konverter D-Link Manualer

D-Link DES-6505 Manual

24 December 2024

D-Link DIS‑M100G‑SW Manual

2 November 2024

D-Link DMC-805X Manual

23 Oktober 2024

D-Link DMC-300M Manual

20 Oktober 2024

D-Link DMC-1000 Manual

5 August 2024

D-Link DMC-300SC Manual

17 Juni 2024

D-Link DMC-515SC Manual

19 Juni 2023

D-Link DIS-M100G-SW Manual

19 November 2022

Audio/video konverter Manualer

Nyeste Audio/video konverter Manualer

Smart-AVI V2V-MAX 3 Manual

21 December 2024

Smart-AVI V2V-AV2HV Manual

21 December 2024

Smart-AVI V2V-H2V-01 Manual

21 December 2024

Smart-AVI V2V-C2H-01 Manual

21 December 2024

19 December 2024

19 December 2024

19 December 2024

19 December 2024

Kramer VP-427A Manual

19 December 2024

Kramer VP-480 Manual

19 December 2024