Datalogic 8400 Manual
Læs nedenfor 📖 manual på dansk for Datalogic 8400 (2 sider) i kategorien Stregkodescanner. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
1x
1x 1x 1x
MagellanTM 83/8400 Calibration Process Quick Reference Sheet
1 2 3 4
5 6 7 8
Ensure that the Scanner-
Scale is powered-on (the
green top LED and orange
>0< button will be lit or
flashing).
Return the wire lift handle
to its down position and
replace the Top Platter. (If
the Top Platter does not
seat correctly, recheck to
see that the lift handle is
fully retracted.)
After ensuring the platter
is fully seated, press &
release the flashing >0<
button once. Wait for the
scanner to sound two
beeps. (The >0< button
will continue to flash.)
Place 20 lbs. of certified
weights on the platter and
press & release the >0<
button once. The scanner
will emit a trill sound upon
registering the weight.
Remove the weights from
the platter and press &
release the >0< button once
to complete the calibration
sequence. The scanner will
reset and the >0< button
will light steadily.
Remove the Top Platter
from the scanner-scale,
and locate the switch
door.
Open the calibration door
cover by pushing back
towards the optics
chassis. (It may be
necessary to push the
wire lift handle into the
upright position to access
the cover.)
Use your finger to reach
inside the calibration bay,
locate the small plunger
switch and press &
release it once. The
scanner will issue seven
rapid beeps and the >0<
button will begin to flash.
www. datalogic.com © 2013 Datalogic, Inc. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Produkt Specifikationer
| Mærke: | Datalogic |
| Kategori: | Stregkodescanner |
| Model: | 8400 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Datalogic 8400 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Stregkodescanner Datalogic Manualer
21 August 2024
20 August 2024
19 August 2024
18 August 2024
16 August 2024
16 August 2024
14 August 2024
10 August 2024
10 August 2024
9 August 2024
Datalogic Manualer
9 Oktober 2024
22 September 2024
12 September 2024
30 August 2024
21 August 2024
20 August 2024
19 August 2024
18 August 2024
16 August 2024
16 August 2024