Datalogic Lynx Single Slot Dock Manual
Datalogic
Stregkodescanner
Lynx Single Slot Dock
Læs nedenfor 📖 manual på dansk for Datalogic Lynx Single Slot Dock (2 sider) i kategorien Stregkodescanner. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Lynx™ Single Slot Dock
NOTE
Read this manual carefully before performing any type of
connection from the terminal to a host PC using the
Single Slot Dock.
The user is responsible for any damages caused by
incorrect use of the equipment or by inobservance of the
indication supplied in this manual.
NOTE
Do not attempt to disassemble the Single Slot Dock, as it
does not contain parts that can be repaired by the user.
Any tampering will invalidate the warranty.
The Single Slot Dock paired with a Lynx PDA builds a reading system for
the collection, decoding and transmission of barcoded data.
The Single Slot Dock is both a USB and a serial communication adapter
between the terminal and the host computer.
The Single Slot Dock also functions as a battery charger, both for the
terminal and the spare battery pack (standard 94ACC0064 and high
capacity 94ACC0065). The spare battery can be charged by inserting it
into the slot at the back of the cradle.
Power supply is required for the Lynx to be connected to the cradle and
for battery recharging operations.
Figure 1 –Single Slot Dock General View
Key:
A) Contacts for Lynx
B) Power on LED
C) Battery charge status LED
D) RS232 connector
E) USB connector
F) Power supply connector
G) Spare battery slot
822001281 (Rev. A)
PDA INSERTION/ REMOVAL
For correct insertion into the cradle, insert the PDA from the top of the
cradle and push it down.
Figure 2 - PDA Insertion
To remove the PDA from the cradle, simply pull it upwards while holding
the cradle firmly down.
Power Supply
Each dock requires a power supply to be connected to mobile computers.
We recommend the power supply already included in the box.
-
+
Figure 3 - Power Supply Polarity
LED INDICATORS
Power LED Status Indicator
Color Status
Green Cradle powered
Battery Charging LED Status Indicators
Color Status
Off Battery absent
Red Battery charge in progress
Green Charge completed
Red Blinking Error
USING THE SPARE BATTERY CHARGER
Insert the battery, contacts side first, into the slot and press it until the
battery latch is automatically closed; charging starts automatically.
Figure 4
To remove the battery, press the battery-release lever.
Figure 5
FASTENING THE DOCK TO A SURFACE
To securely fasten the Single Slot Dock to tables, desks and other
surfaces, and to prevent the dock from moving when you remove the
device, use the four velcro dual lock feet provided with the matching dual-
lock adhesive pads.
Figure 6
Remove the protective feet from the dock before attaching the velcro dual
lock feet.
A
C
B
F
G
D
E
Produkt Specifikationer
| Mærke: | Datalogic |
| Kategori: | Stregkodescanner |
| Model: | Lynx Single Slot Dock |
Har du brug for hjælp?
Hvis du har brug for hjælp til Datalogic Lynx Single Slot Dock stil et spørgsmål nedenfor, og andre brugere vil svare dig
Stregkodescanner Datalogic Manualer
21 August 2024
20 August 2024
19 August 2024
18 August 2024
16 August 2024
16 August 2024
14 August 2024
10 August 2024
10 August 2024
9 August 2024
Datalogic Manualer
9 Oktober 2024
22 September 2024
12 September 2024
30 August 2024
21 August 2024
20 August 2024
19 August 2024
18 August 2024
16 August 2024
16 August 2024