Denver ACT-1301 MK2 Manual

Denver Videokamera ACT-1301 MK2

Læs nedenfor 📖 manual på dansk for Denver ACT-1301 MK2 (2 sider) i kategorien Videokamera. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

ACT-1301 MK2 Quick Start Guide

Appearance and key introduction

Key/Indi

cator

Function

Power

On/Oﬀ

Power the camera on or oﬀ. When opening the

menu, switch over between normal (eﬀect

parameters and replay of image, video) and

setup menu.

Shutter

In recording video mode, it is used to start/stop

recording. In capture mode, it is used as a

shutter. In replay mode; it is used to play the

video. When operating the menu, it is used to

conﬁrm the selection.

Up key

Digital zoom in (capture/video mode); menu

selection (after opening the menu); pause,

continue playing (when playing and recording

video in replay mode).

OK key

Open/exit from menu. Stop playing (when

replaying video).

Down key

Digital zoom out (capture/video mode); menu

selection (after opening the menu).

Mode

switch

Switch over among modes of capture, video and

replay.

Operation

indicator

The upper one is

a charging

indicator.

In power-oﬀ state, it keeps

constant lighting when the

charger is connected for

charging.

The lower one is

an operation

indicator.

It ﬂashes once during

capturing, and it keeps

constant lighting when

connected with computer

portable disk.

Start Use

1. Charge built-in lithium battery

In power-oﬀ state, when the camera is connected with computer,

charging begins. At this time, the charger indicator lights and it turns oﬀ

when charged full. Generally, it costs 2-4 hours to charge full.

2. Use memory card

1. Follow the instructions carved by slot of the memory card, it is to insert

FT card into the card slot till entirely inserted.

2. To take the FT card out, after gently pressing the end of the memory

card inwards, the card will reject out.

Please notice: UHS (ultra highspeed) cards doesn’t work, as they

are not 100% backward compatible

Note: The camera is not equipped with a built-in memory, and thus

a memory card is required.

3. Power On/Oﬀ:

3.1 Power-on: If to press and hold POWER key for 3 seconds, the

screen starts up and the camera enters startup state.

3.2 Power-oﬀ: In idle state of the camera, if to click POWER key, the

camera turns oﬀ.

Automatic power-oﬀ: When idle time set for the camera reaches, it

automatically turns oﬀ to save power. The default time of the

system automatic power-oﬀ is 5 minutes;

3.3 Power-oﬀ due to low battery: In case of extremely low battery, the

icon “ ”appears on the LCD screen. Please timely

charge the battery. When the icon turns red and ﬂashes, the

camera will automatically power oﬀ.

4. Functional mode switchover

The camera is equipped with three modes: capture, video and replay

mode. After power-on, the modes can be switched over with MODE

switch.

5. Indicators

Operation indicator: When the camera works (e.g. recording video,

capturing or automatic screen turn-oﬀ), the

operation indicator lights.

Charger indicator: Constant lighting is to remind user that the

camera is being charged.

6 Video mode

( With maximum 29 minutes video recording per sequence)

When pushing Mode switch to video mode, click shutter in

preview state to start recording video; to stop video recording,

it is to click it again. It will also automatically stop recording in

case that no free room left in the memory card or the battery is

over low:

1 00:00:01: time-meter, indicating 1 second left for recording

(indicating 1 second recorded during recording).

2 : mode icon: indicates the current mode is video

recording.

3 : loop recording video time icon: indicates the current loop

video recording time is 3 minutes.

4 : movie size: indicates the current movie size is 720P.

5 : indicates currently a memory card is inserted.

6 : magniﬁcation of digital zoom: press Up and down key to

adjust zoom among 1x-4x.

7 : battery icon: indicates current battery level.

8 : white balance icon: indicates the current white balance

mode is automatic.

9 ：metering icon: indicates it is currently the pan overall

perspective metering.

Video menu setup

In video mode, press OK key to open menu, and then press Up and

Down key to select menu. When selecting menu, background of the

selected item will be highlighted. Press Shutter to enter sub-menu. In

sub-menu, press Up and Down key for selection, press Shutter for

conﬁrmation and back to main menu. In the main menu, press OK

USB Cable

Capture mode: Take pictures.

Video mode: Record video and

driving (5min, 3min and 1min).

Replay mode: Picture and video

ﬁle playback.

Mode switch:

-Photograph

-Video

-Replay

Lens

Power

On/Oﬀ

Shutter

Charging indicator

Operation indicator

Up key

OK key

Down key

LCD TFT

Produkt Specifikationer

Mærke:	Denver
Kategori:	Videokamera
Model:	ACT-1301 MK2
Bredde:	30 mm
Dybde:	70 mm
Højde:	45 mm
Vægt:	- g
Produktfarve:	Sort
Batterikapacitet:	220 mAh
Indbygget skærm:	Ja
Skærm diagonal:	1.77 "
Kompatible hukommelseskort:	MicroSD (TransFlash)
Wi-Fi:	Ingen
Bluetooth:	Ingen
Batteriteknologi:	Lithium
Produkter pr. intermodal container (20 fod):	5360 stk
Produkter pr. intermodal container (40 fod, HC):	12800 stk
HD-type:	HD
Antal USB 2.0-porte:	1
Understøttede videoformater:	AVI
Skærm:	LCD
Kabler inkluderet:	USB
Understøttede billedformater:	JPG
Near Field Communication (NFC):	Ingen
LED-indikatorer:	Ja
Batterilevetid (maks.):	1 t
GPS (satellit):	Ingen
Lagermedie:	Hukommelseskort
Indbygget mikrofon:	Ja
Sensortype:	CMOS
Maksimal billedopløsning:	2592 x 1944 pixel
Samlet antal megapixels:	1.3 MP
Maksimal videoopløsning:	1280 x 720 pixel
Maksimal størrelse på hukommelseskort:	32 GB
Maksimum billedhastighed:	30 fps
USB-stik type:	Mini-USB
Synsfelt vinkel (FOV):	45 °
Fototilstand:	Ja
HD-Ready:	Ja
Undervandsbeholder:	Ja
Undervandskabinet vandtæt op til:	10 m
Cykelbeslag:	Ja
Hjelmbeslag:	Ja