Denver ACT-5001 Manual

Denver Videokamera ACT-5001

Læs nedenfor 📖 manual på dansk for Denver ACT-5001 (2 sider) i kategorien Videokamera. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
ACT-5001Quick Start Guide
Appearance
Key/Indica
tor
Function
Power key
Power On/Off; switch over among video recording,
capturing and playback
Shutter key
Video recording/capturing; play/stop playing video
file (Playback mode); menu confirmation
MENU key
Open and exit from menu Stop play video files
(playback mode)
Up key
Digital zoom-in: select menu (after opening the
menu); file page-up; pause playing video (playback
mode); Retreat quickly video (playback mode)
Down key
Digital zoom-out: select menu (after opening the
menu); file page-down Fast forward video
(playback mode)
Charger
indicator
Indicator lights in red during charging, and the
indicator turns off after charging full.Power off
charging
Busy
indicator
When the camera is busy (for example: during film
recording, capturing, automatic screen-off), the
busy indicator will light.
Start to use
1. Charge the built-in lithium battery
The camera is equipped with built-in 3.7V lithium battery. Please
ensure power available for the camera and timely charge it in case of
low battery.
Connect the camera to computer for charging under shutdown
status. The charging indicator will be on when charging, and will be
off when the battery is fully charged. Generally, the battery can be
fully charged after 2-4 hours.
2. How to use the memory card
2.1 Properly insert the TF card into the card holder as per the
instructions indicated near the card holder.
2.2 To remove the TF card, press the end of memory card gently, the
card will be ejected.
Note: The camera is not equipped with built- memory. Please in
insert memory card before using. Before using the camera,
it is a must to format the memory card on the camera.
3. Startup and shutdown:
3.1 Startup: press the POWER key for 3 second, the camera will show
startup screen and enters into POWER ON state;
3.2 Shutdown: press the POWER key when the camera is under idle
mode to shut down;
3.3 Auto shutdown: the camera will be shut down automatically when
the camera is under idle mode for a certain time to save power.
The default time for auto shutdown is 3 min.
3.4 Shutdown under low power: when the
battery is under low power, the LCD will
indicate ”. Please charge the battery timely. When the
icon turns red and flashes, the camera will be shut down
automatically.
4. Function modes switching
The camera has 3 modes: photo mode, recording mode, and
playback mode. Use the power key to switch the modes after starting
up.
Recording mode: for recording videos;
Photo mode: for taking photos;
Playback mode: for playing back the current video.
5. Indicators
6.1 BUSY indicator: When the camera is working (e.g. recording,
photographing, auto screen off etc.), the indicator will light;
6.2 Charging indicator: In shutdown state, the lightened indicator
means the user is charging the camera.
6. Photo/recording mode
(With maximum 29 minutes video recording per sequence)
It enters automatically into recording mode.
Press Shutter to start recording, and press Shutter again to stop
recording.
Press Shutter to directly take photo.
In rerecording/photo mode, press Up/Down for digital zoom in/out.
6.1 Screen display in photo mode


Produkt Specifikationer

Mærke: Denver
Kategori: Videokamera
Model: ACT-5001

Har du brug for hjælp?

Hvis du har brug for hjælp til Denver ACT-5001 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Videokamera Denver Manualer

Videokamera Manualer

Nyeste Videokamera Manualer

Panasonic

Panasonic NV-DS65 Manual

2 December 2024
Minolta

Minolta MN90NV Manual

20 November 2024
Aquapix

Aquapix WDV5630 Manual

19 November 2024
Ikan

Ikan PT4700-SDI Manual

15 November 2024
Panasonic

Panasonic NV-DS60 Manual

13 November 2024
Panasonic

Panasonic NV-DS15 Manual

7 November 2024
Aiptek

Aiptek A-HD Manual

21 Oktober 2024