Dnipro Krait Manual
Dnipro
Syntese maskine
Krait
Læs nedenfor 📖 manual på dansk for Dnipro Krait (1 sider) i kategorien Syntese maskine. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
To change incoming clock
resolution, power on Krait while
holding BIG button.
Choose Mode
for selected
channel
Select one of three CV tracks by
pressing < > buttons. Current
selected track is shown with
corresponding led.
This buttons also work as fine +-
tuner in MOD and SET menus.
Press MOD button and choose
desired tool with “< >” buttons or
potentiometer.
Second press of MOD button will
select output voltage range for
current track: use “< >” buttons or
knob to set it to Uni or Bi-polar:
-5v+5v or 0v +5v.
F.e. track 2 is currently selected
here. Function buttons and
potentiometer are modal
controllers for the selected
track.
Each of three tracks has a
dedicated output.
Selected
channel
indicators
Function
button
“x”
Function
button “o”
Channels
outputs
Clock
in
Reset
in
BIG
button
Select
next
channel
Select
previous
channel
Channel
Settings
Krait is a versatile 3-channel
modulation source for eurorack
system. Each individual channel
can be either a Knob Recorder,
LFO or loopable Random
Generator. The module is
designed to be in solid sync with
your beat, so in order to work,
Krait should receive steady
external clock pulse. However,
LFO will work without clock. All
settings and waveforms will be
autosaved and reloaded after
power off.
The second channel optionally
can be a mixer of the 1st and 3d
channels.
Can record pot turns continu-
ously or simultaneously with Big
button press. Up to 8 bars loops
possible.
Tap tempo LFO with morphable
waveforms and phase offset.
Syncable random with
portamento and possibility to
freeze and loop 16 steps.
FLOWKRAIT
Knob Recorder:
Lfo:
Random Generator:
Produkt Specifikationer
| Mærke: | Dnipro |
| Kategori: | Syntese maskine |
| Model: | Krait |
Har du brug for hjælp?
Hvis du har brug for hjælp til Dnipro Krait stil et spørgsmål nedenfor, og andre brugere vil svare dig
Syntese maskine Dnipro Manualer
30 December 2025
30 December 2025
Syntese maskine Manualer
- Syntese maskine Moog
- Syntese maskine Pioneer
- Syntese maskine Behringer
- Syntese maskine Roland
- Syntese maskine Yamaha
- Syntese maskine Casio
- Syntese maskine Suzuki
- Syntese maskine Korg
- Syntese maskine Arturia
- Syntese maskine Dreadbox
- Syntese maskine Studiologic
- Syntese maskine AAS
- Syntese maskine Waldorf
- Syntese maskine Modal Electronics
- Syntese maskine Nord
- Syntese maskine Sonicware
- Syntese maskine ELTA Music
- Syntese maskine Analogue Solutions
- Syntese maskine Ferrofish
Nyeste Syntese maskine Manualer
4 Januar 2025
2 Januar 2025
2 Januar 2025
15 December 2024
15 December 2024
15 December 2024
10 December 2024
15 November 2024
15 November 2024
2 November 2024