Elmo MO-2 Manual

Elmo Overheadprojektor MO-2

Læs nedenfor 📖 manual på dansk for Elmo MO-2 (70 sider) i kategorien Overheadprojektor. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/70

MA-1 / MO-2

MA-1 / MO-2MA-1 / MO-2

VISUAL

VISUALVISUAL PRESE

PRESE

PRESEPRESENTER

NTER

NTERNTER

INSTRUCTION MANUAL

■IMPORTANT SAFEGUARDS

■ Read Instructions

All the safety and operating instructions should be read before the appliance is operated.

■ Retain Instructions

The safety and operating instructions should be retained for future reference.

■ Heed Warnings

All warnings on the product and in the operating instructions should be adhered to.

■ Follow Instructions

All operating and use instructions should be followed.

■ Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

■ Attachments

Do not use attachments not recommended by the product manufacturer as they may

cause hazards.

■ Water and Moisture

Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool, and the like.

■ Placement

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product

may fall, causing serious injury to a child or adult, and serious damage to the product. Use

only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or

sold with the product. Any mounting of the product should follow the manufacturer’s

instructions, and should use a mounting accessory recommended by the manufacturer.

■ Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure reliable

operation of the product and to protect it from overheating, and these openings must not

be blocked or covered. The openings should never be blocked by placing the product on a

bed, sofa, rug, or other similar surface. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

■ Power Sources

This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home consult your

appliance dealer or local power company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

■ Grounding or Polarization

This product may be equipped with either a polarized 2-wire AC line plug (a plug having

one blade wider than the other) or a 3-wire grounding type plug, a plug having a third

(grounding) pin. If the 2-Wire polarized plug will not fit in the outlet, try reversing the plug.

If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug. The 3-wire grounding type plug will fit into

a grounding type power outlet.

This is a safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the

grounding type plug.

■ Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the product.

■ Lightning

For added protection for this product during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the product due to

lightning and power-line surges.

■ Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this

can result in a risk of fire or electric shock.

■ A product and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the product

and cart combination to overturn.

■ Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

■ Servicing

Do not attempt to service this product yourself as opening or removing covers may expose

you to dangerous voltage or other hazards. Refer all servicing to qualified service

personnel.

■ Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

• When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will often require extensive

work by a qualified technician to restore the product to its normal operation.

• If the product has been dropped or damaged in any way.

• When the product exhibits a distinct change in performance - this indicates a need for

service.

■ Replacement Parts

When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric shock or other

hazards.

■ Safety Check

Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in proper operating condition.

■ Heat

The product should be situated away from heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that produce heat.

The lightning ash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product s enclosure that may be of sucient magnitude ’

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the product.

SA 1966

SA 1965

FOR UNITED STATES USERS:

INFORMATION

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

USER-INSTALLER

CAUTION:

Your authority to operate this FCC veried equipment could be voided if you make changes

or modications not expressly approved by the party responsible for compliance to Part 15

of the FCC rules.

This symbol [crossed-out wheeled bin WEEE Annex IV] indicates

separate collection of waste electrical and electronic equipment in the

EU countries.

Please do not throw the equipment into the domestic refuse.

Please use the return and collection systems available in your country

for the disposal of this product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

The connection of a non-shielded equipment interface cable to this equipment will

invalidate the FCC Certication or Declaration of this device and may cause interference

levels which exceed the limits established by the FCC for this equipment. It is the

responsibility of the user to obtain and use a shielded equipment interface cable with this

device. If this equipment has more than one interface connector, do not leave cables

connected to unused interfaces. Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

USA

USAUSAGE

GE GE PREC

PREC

PRECPRECAU

AUAUTIO

TIO

TIOTIONS

NSNS

■ Be sure to use the AC adapter.

■ The supplied AC adapter is designed for exclusive use with this product. Do not use it

with other products.

■ Do not press the touchscreen strongly by nger or sharp objects. This can cause

damage or malfunction.

■ Be careful not to pinch your nger when you move the arm or touchscreen.

■ A protective sheet is attached to the surface of the touchscreen. Remove it before you

use the product.

■ The AC adapter appropriate for the country where it is used is supplied with the product.

If the product was sold in Japan, use the AC adapter sold with the product with 100 VAC

and 50 or 60 Hz.

■ When storing the product, do not leave it under direct sunlight or by heaters. It may be

discolored, deformed, or damaged.

■ Do not place the product in any humid, dusty, salt bearing wind, or vibrating locations.

■ Use it under the following environmental conditions:

Temperature： ℃～ ℃ ：0 40 Humidity 30％～ (No condensation) 85％

■ Do not use the product in an environment where the temperature of the product

becomes too hot, such as under direct sunlight or by heaters. The product will

automatically stop the operation to protect the battery when the internal temperature

reaches 65 . ℃

■ Use a soft, dry cloth for cleaning. Do not use any volatile solvent such as thinner or

benzene.

■ Luminescent and Black Spots

There may be some pixels that do not properly operate due to the use of CMOS Area

Image Sensors made-up of many pixels.

Though luminescent or black spots may be found on the screen, it is a phenomenon

peculiar to the CMOS Area Image Sensors and is not a malfunction.

■ Follow the guidelines below to prevent the product from dropping or overturning.

- Use the product on a stable base, desk, or table. Do not place the product on an

unstable base or slanted location.

- Place or wire the product so as to prevent the cables from being pulled or drawn.

■ Do not point the lens directly to the sun. It could degrade the imaging capability.

■ Do not look directly into the LED light. If you look directly into it at pointblank range,

your eyes may be injured.

■ Some type of SD card/USB ash drive can be used.

■ Transfer the data saved in the recording media (such as the internal storage, SD card

and USB flash drive) to a device such as a PC to save a backup copy. Malfunction of the

product or repairs to it may cause the data to be deleted.

■ ELMO is not liable for any damage caused by the loss or damage of the data in the

recording media.

■ Disposal of battery

This product uses Lithium Ion rechargeable and recyclable battery.

When disposing of the battery, contact the dealer from whom you purchased the

product. Do not try to remove the battery by yourself.

■ If e product is used for longer than the warranty period, its performance and quality th

may deteriorate due to the lifetime of its parts. For parts replacement (on chargeable

basis), consult the dealer from whom you purchased this product or our branch/oce

near your location.

■ The built-in lithium-ion battery has its own life span. Along with the temperature,

frequency of use, time of use and the time passed, battery capacity decreases gradually.

If operation time becomes substantially short at normal temperature (between 10°C

and 30°C), the battery life seems to have come near its end. Replace it with a new

battery. Contact your dealer or ELMO Customer Service for battery replacement (fee

applies).

■ Copyright

Unless used for personal use, it is prohibited strictly under copyright law to use any

photo les without the prior consent of the copyright holder. Even if using for personal

use, be careful that there could be a situation where video or audio recording is

restricted or illegal.

■ About WiFi (Wireless LAN)

・ This product and the wireless device in this product have been certied under the

Radio Law for 2.4GHz and 5GHz band. Using this product in countries other than the

country where you purchased it may infringe the radio wave laws of the country

where it is used.

・ In case of communication problem change location. Depending on the using

environment (e.g., there are many obstacles) the wireless communication may be

adversely aected. Especially the wireless communication is not available under the

following conditions.

There are metal and/or concrete between the product and monitor. ‒

・ Do not use this product under the following conditions.

Near industrial, scientic, and medical devices, such as a pacemaker ‒

Near in-plant radio station for mobile equipment identier (license required and ‒

being used in factory line; etc.)

Near low power wireless base station (license not required) ‒

・ There are conditions to be met before using 5GHz wireless LAN outdoor.

■ Precautions for using the product in 2.4GHz band

This product shares a frequency band with a wide range of equipment (e.g. industrial,

scientic, and medical equipment such as microwave ovens), in-plant radio station for

mobile equipment identifier (radio stations requiring licenses), and specied low-power

radio stations (radio stations not requiring licenses) used for factory production lines as

well as amateur radio stations (radio stations requiring licenses).

・ Before use, conrm that no in-plant radio station for mobile equipment identier and

specied low-power radio stations or amateur radio stations operate in your vicinity.

・ In the event that this equipment causes harmful interference to any in-plant radio

station for mobile equipment identier, immediately change frequencies or halt radio

wave emission and contact the dealer from whom you purchased the product for

consultation on interference avoidance measures (e.g., partition installation).

・ Please contact the dealer from whom you purchased the product if this equipment

causes harmful interference to any specied low-power radio stations or amateur radio

stations, or if other problems arise.

■ Connectivity with all wireless LAN (WiFi) compatible devices is not guaranteed.

■ The contents of this document are subject to change without notice. The latest version

is available from the following ocial websites:

https://www.elmousa.com https://www.elmoeurope.com

■ It is prohibited under copyright law to use or copy any part or the whole of this

document without our prior written consent.

■ TABLE OF CONTENTS

■IMPORTANT SAFEGUARDS 1

USAGE PRECAUTIONS 4

HANDLING PRECAUTIONS 6

■ TABLE OF CONTENTS 7

➊ BEFORE YOU USE 8

◆CHECKING PACKAGE CONTENTS ···················································································· 8

◆CHECKING NAME OF EACH PART 9 ····················································································

◆OPERATING PANEL ······································································································· 10

◆FRONT PANEL ·············································································································· 12

◆REAR PANEL AND CABLE CONNECTION ········································································· 12

■START SCREEN ·········································································································· 13

■STATUS AREA ············································································································· 14

■ZOOM AREA ··············································································································· 14

■PEN MENU FOR DRAWING ··························································································· 15

◆CHECKING MOVING PARTS OF THE PRODUCT ································································ 18

➋ PREPARATION AND CONNECTION 19

◆SETTING UP ················································································································ 19

◆CONNECTING TO A PROJECTOR OR MONITOR ······························································· 20

◆CONNECTING TO A PC ·································································································· 20

◆TURNING ON OR OFF THE POWER 21 ················································································

➌ USING THE PRODUCT 22

◆OPERATING MA-1 ········································································································· 22

■ADJUSTING THE IMAGE SIZE ······················································································· 22

■ADJUSTING THE FOCUS ······························································································ 22

■ADJUSTING THE BRIGHTNESS ····················································································· 23

■ROTATING THE IMAGE································································································· 23

■TURNING ON OR OFF THE LED LIGHTING ····································································· 23

■PAUSING THE IMAGE ·································································································· 24

■CAPTURING STILL PICTURES ······················································································ 24

■RECORDING VIDEOS ·································································································· 24

■SELECTING THE IMAGE SOURCE ················································································· 25

◆OPERATING MO-2 ········································································································· 26

■ADJUSTING THE IMAGE SIZE ······················································································· 26

■ADJUSTING THE FOCUS ······························································································ 26

■ADJUSTING THE BRIGHTNESS ····················································································· 26

■ROTATING THE IMAGE································································································· 26

■TURNING ON OR OFF THE LED LIGHTING ····································································· 27

■PAUSING THE IMAGE ·································································································· 27

■CAPTURING STILL PICTURES ······················································································ 28

■RECORDING VIDEOS ·································································································· 28

■SELECTING THE IMAGE SOURCE ················································································· 29

➍ ADVANCED OPERATIONS 30

◆OPERATING THE HOME SCREEN ··················································································· 30

◆CHECKING THE CAMERA SETTINGS ·············································································· 33

◆USING THE DRAWING FUNCTION ··················································································· 39

◆USING THE BROWSER ·································································································· 40

◆DISPLAYING THE EXTERNAL INPUT IMAGE ····································································· 42

◆LIST OF CONTENT ITEMS ······························································································ 43

◆PLAYBACK OF A CONTENT ITEM ···················································································· 44

◆USING THE QR CODE READER ······················································································ 48

◆USING THE DIGITAL TEXTBOOK ····················································································· 49

◆USING THE SHARE MENU ····························································································· 50

◆USING MIRACAST ········································································································· 52

◆USING THE TIMER ········································································································ 54

◆USING ELMO PLAY ······································································································· 55

◆USING THE FILE MANAGER ··························································································· 55

◆USING THE AUTOMATIC DESKEW FUNCTION ·································································· 56

◆USING WITH WIRELESS TABLET OR PORTABLE IWB (BOTH SOLD SEPARATELY) ················ 56

➎ LIST OF ERROR MESSAGES 57

➏ TROUBLE SHOOTING 59

◆SYMPTOMS AND CONFIRMATION ··················································································· 59

❼ SPECIFICATION 62

◆RESOLUTION ··············································································································· 62

◆RESTRICTIONS ON THE IMAGE OUTPUT ········································································ 62

◆BATTERY ····················································································································· 62

◆HOW TO USE THE FIXING SCREWS ················································································ 64

◆MAIN CAMERA ············································································································· 65

◆ILLUMINATION DEVICE ··································································································· 65

◆FUNCTIONAL SPECIFICATION ························································································· 65

◆VIDEO QUALITY ··········································································································· 66

◆SUPPORTED MEDIA FORMAT ·························································································66

◆SETTINGS ····················································································································66

■ TRADEMARKS AND LICENSES 68

➊

➊➊

BEFORE YOU USE

◆CHECKING PACKAGE CONTENTS

The items below are included with the product. If any item is missing, contact the

dealer from whom you purchased product. the

Quick Start Guide

Warranty Card

(For Japan

/ North America only）

CAUTION

Do not wrap the power cable tightly around the AC adapter while the power cable is

connected to the AC adapter. The cable could be damaged (disconnected) or the

inside of the cable could be exposed and result in an accident.

AC adapter

IMPORTANT SAFEGUARDS

●About AC adapter

Press and slide the plug into the groove of the AC adapter

as shown in the drawing.

※Slide it until it clicks.

※Choose the correct plug according to the outlet.

When removing the plug from the AC adapter, slide and pull

the plug in the opposite direction while pressing the lock button.

MA-1

MO-2

◆CHECKING NAME OF EACH PART

Name

①

Camera head

②

LED lighting

③

Arm

④

Operating panel

⑤

Front panel

⑥

Rear panel

⑦

Touchscreen

MA-1

MO-2

①

②

④

⑦

⑤

⑥

②

①

③

④

⑥

⑤

⑥

MA MO-1／-2

◆OPERATING PANEL

■MA-1

Name

Description

①

Power

Long press To turn on or o the power. ＝

Short press To enter or cancel the standby mode. ( P.21) ＝ ⇒

Power LED

Power Turns blue on：

Power o O：（※When charging: Turns red ）

Standby : O ( When charging: Turns red) ※

②

Freeze

To pause the currently displayed image. Press this button again to

cancel the pause. (⇒P.24)

③

Capture

To save the currently displayed image as a still picture. ( P.24) ⇒

④

Home

To switch to the Home screen. ( ) ⇒P.30

⑤

Zoom +

To enlarge the image. ( P.22) ⇒

⑥

Zoom －

To shrink the image. ( P.22) ⇒

⑦

To adjust the focus automatically when the button is pressed.

(One-push AF). (⇒P.22)

⑧

Built-in

microphone

To record the surrounding audio.

⑨

Speaker

To output the audio. ( P.33) ⇒

⑩

Touchscreen

To display the Document camera image or menus.

Various settings can be congured by touching the screen.

①

⑨

②

③

④

⑤

⑥

⑦

⑧

⑩

■MO-2

Name

Description

①

Power

Long press To turn on or o the power. ＝

Short press To enter or release the standby mode. ( P.21) ＝ ⇒

Power LED

Power Turns blue on：

Power o O When charging: Turns red ：ff（※ ）

Standby : O ( When charging: Turns red) ※

②

To adjust the focus automatically when the button is pressed.

(One-push AF). ( P.26) ⇒

③

Zoom -

To shrink the image. ( P.26) ⇒

④

Zoom +

To enlarge the image. ( P.26) ⇒

⑤

Camera

To display the camera image. ( P.29) ⇒

⑥

External input

To switch between the HDMI IN-image and the camera image.

( P.29) ⇒

⑦

Status LED

To indicate each status.

HDMI: External input ( ) ⇒P.42

WiFi: WiFi connection ( ) ⇒P.50

Miracast: Miracast connection ( ) ⇒P.52

⑧

Brightness -

To darken the image. ( P.26) ⇒

⑨

Brightness＋

To brighten the image. ( P.26) ⇒

⑩

Home

To switch to the Home screen. ( ) ⇒P.30

⑪

Capture

To save the currently displayed image as a still picture. P.28 （⇒ ）

Direction button: Up

⑫

LED lighting

To turn on or turn o the LED lighting.（⇒P.27 ）

Direction button: Enter

⑬

Image rotation

To rotate the camera image. 0 ( P.26 （ °／90 180 270°／ °／ °） ⇒ ）

Direction button: Left

⑭

Freeze

To pause the currently displayed image. Press this button again to

cancel the pause.（⇒P.27 ）

Direction button: Right

⑮

Video

To record the camera image as a video. P.28 （⇒ ）

Direction button: Down

⑯

Built-in

microphone

To record the surrounding audio.

⑰

Speaker

To output the audio. （⇒P.33）

①

④

⑤

② ③

⑥ ⑦

⑧ ⑨

⑩ ⑪

⑫

⑬ ⑭

⑮

⑯

⑰

◆FRONT PANEL

◆REAR PANEL AND CABLE CONNECTION

※1 The priority order for the audio output: AUDIO OUT > HDMI OUT > speaker

Name

Description

①

Audio input

To connect the microphone. P.33（⇒ ）

Use the electret condenser microphone.

②

USB2.0 (Type A)

To connect the mouse or the USB ash drive.（⇒P.41）

③

SD card

To insert the card.SD （⇒ ）P.41

Name

Description

①

Security slot

To connect a security cable. (Size of the slot: 7 x 3 mm)

②

LAN

To connect the product to the network. P.35, P.（⇒ 50）

③

USB2.0

(TypeB)

To connect the product to a PC to use UVC (USB Video Class).

（⇒ ）P.49

④

USB2.0

(TypeA)

To connect the mouse or the USB ash drive. （⇒P.41）

⑤

AUDIO OUT

To output audio. 1 ※

⑥

RGB OUT

To output analog RGB images by connecting to a monitor which has

an analog RGB input port. （⇒P.20）

⑦

HDMI OUT

(TypeA)

To output digital images and audio by connecting to a monitor which

has an HDMI input port. 1 （⇒P.20）※

⑧

HDMI IN

(TypeA)

To input HDMI images and audio.（⇒P.42）

⑨

DC IN 5V

To connect the supplied AC adapter.

⑩

Reset

To reset the system and return to the factory settings.

Press this button with a sharp object such as a pin. When the product

freezes, reset it using this button.

⑪

Fixing screw

holes

To secure the product to a table.

Use a M3 screw, with 0.5mm thread pitch, and 7 - 12mm long.

(Screws are not included.)

Connecting the microphone other than the electret condenser microphone

(a microphone for a ) may cause malfunction. PC

CAUTION

①

②

③

②

③

⑤

⑥

⑦

⑧

④

①

⑨

B ottom

⑩

⑪

■START SCREEN

At start up, the Document camera screen will be displayed. The Pen menu for drawing

( P.15) can be displayed by the following operations: ⇒

For MA-1: Press the left tab or right tab on the touchscreen or click the left tab or right

tab on the external monitor with the mouse.

For MO-2: Click the left tab or right tab on the external monitor with the mouse.

(The same Pen menu will be displayed no matter which tab is selected. Use the tab you

like according to the subject.)

Document camera screen (Drawing screen)

The Menu area ( P.17), the Status area ⇒

( P.14) and the Zoom area ( P.14 will be ⇒ ⇒ )

displayed.

Press the Home button on the operating panel to

move to the Home screen.

（⇒ ）P.30

If you want to open other app after start-up,

select the app from the Home screen.

The Menu area can be hidden by swiping it

down. (The Drawing screen will be displayed .)

The Pen menu will be displayed either at the

left-end or the right-end of the screen.

Select a pen to perform the drawing.

（⇒ ）P.39

※The Menu area will not appear while the

Pen menu for drawing is displayed. Close

the Drawing menu to display the Menu

area.

Left tab

(A)

Right tab (C)

Bottom Tab (B)

Camera image

Screen (A) or (C)

Pen menu

Menu area

Status area

Zoom area

Screen (B)

■STATUS AREA

The status of the camera will be displayed with icons.

※1 Either WiFi icon or LAN icon will be displayed depending on the network connection

status.

※2 The currently set recording destination will be displayed. （⇒P.41）

(The priority order for the recording destination: USB ash drive > SD card >

internal storage)

■ZOOM AREA

The Zoom area will be displayed when zoom operated is performed

in the Document camera screen or when the Menu area is

displayed.

The Zoom slider and the AF button will be displayed.

※The Zoom area does not appear during video playback as no

zoom operation can be performed during video playback.

Zoom slider: Adjust the zoom by moving the round tab up and

down.

AF button Press once. One-push：（）

※The AF button will be displayed only when the camera

image is displayed.

Icon

Name

Function

WiFi 1 ※

To display the WiFi status.

LAN 1 ※

This icon will be displayed when the LAN cable is connected.

Battery

To display the battery level and the charging status.（⇒P.62）

SD card 2 ※

This icon will be displayed when the recording destination is set

to SD card.

USB ash

drive 2 ※

This icon will be displayed when the writing destination is set to

USB ash drive.

Freeze

This icon will be displayed during freeze.

Image rotation

This icon will be displayed during image rotation.

(The icon changes according to the rotation angle.)

Recording

This icon will be displayed during recording.

Speaker mute

This icon will be displayed when the speaker is muted.

(This icon will not appear when the speaker mute setting is o.)

Miracast

This icon will be displayed during Miracast communication.

Zoom slider

AF button

Zoom in

Zoom out

■PEN MENU FOR DRAWING

When either tab is selected in the Document camera screen , the Pen menu, （⇒P.13）

the Highlighter menu, the Eraser menu and the Hand tool menu will be displayed.

Select the menu you want to use.

Press or long press the menu to display the sub menu. You can change the type of Pen

or Eraser from the sub menu.

※The selected icon will be highlighted. (Background: Dark blue)

※Performing a capture operation o recording operation during the drawing process r

will record the image with all added drawings.

Pen

Type

Icon

Function

Pen

To draw a line.

Highlighter

To draw a line with opacity 50%.

Pen color

To draw a red line.

To draw a green line.

To draw a blue line.

To draw a black line.

To draw a magenta line.

To draw a cyan line.

To draw a yellow line.

To draw a white smoke line.

Thickness

To draw a thin line.

To draw a middle thickness line. (Default setting)

To draw a thick line. (Default setting for Highlighter)

Pen

Hand tool

Eraser

Sub menu

Highlighter

Eraser

Type

Icon

Function

Eraser

To delete a line drawn by Pen or Highlighter.

(A continuously drawn line can be erased.)

Press the line or swing the nger while pressing the line to erase it.

Delete all

To delete all the lines that are drawn on the screen.

This icon will be displayed when the Eraser menu is pressed after

performing “Delete all”.

To cancel the last “Delete all” action and recover deleted lines. (Only

lines deleted by the last action can be recovered.)

※After deleting the selected line, the Eraser becomes deselected and the last selected Pen

becomes selected again.

Hand tool

To move the display area by dragging when the image is enlarged.

※When displaying the camera image, this function is available only

when the Scroll mode setting is enabled. 33（⇒P. ）

The display area cannot be moved when the Scroll mode setting is

disabled.

■Menu area

The Menu area will be displayed by selecting the bottom tab in the Document camera

screen. 13 （⇒P. ）

The Menu area can be hidden by swiping a nger from inside the screen to the outside

or selecting the bottom tab displayed on the external monitor with the mouse.

※The recording destination can be changed by long pressing the Capture icon or

Recording icon.

（SD card [ ] USB [ ] / / internal storage [ ] ）

※1 The Freeze icon, Brightness icon, LED lighting icon and QR code reader icon will only

be displayed in the Document camera screen.

Icon

Main menu

Sub menu

Function

Capture

To capture the camera image and save it as a still

picture.

○

(Long press)

To select the destination media.

Freeze

※1

To pause or restart the camera image.

Image

rotation

To rotate the camera image.

（／90°／180°／270°）0°

Record

To record a video to the specied media.

○

(Long press)

To select the destination media.

Brightness

※1

To display the Brightness adjustment menu.

The brightness can be adjusted by moving the

Brightness adjustment slider.

LED lighting

※1

To turn on or turn o the LED lighting.

QR code

reader

※1

To enter the QR code reader mode. 48 （⇒P. ）

Home

To display the Home screen. （⇒P.30）

◆CHECKING MOVING PARTS OF THE PRODUCT

This product can be moved as shown below.

Touchscreen

(For -1 only) MA

9090°

°°

27270

°°

35350

°°

9090

°°

9090

°°

CAUTION

Be careful not to let the top of the

camera head hit the camera arm.

CAUTION

Do not move the parts over the

angle specied here. By doing so

may damage the product.

180

180180

°°

➋ PREPARATION AND CONNECTION

◆SETTING UP

STEP1 Raise the camera head while holding the operating panel. ．

STEP2 Raise the arm as indicated by an arrow. ．

STEP3. Raise the camera head. Set it horizontally.

STEP4. Raise the touchscreen monitor as indicated by an arrow. (For MA-1 only)

STEP5 Rotate the camera head according to the shooting direction. ．

STEP1

Operating

panel

Camera

head

Arm

Camera

head

STEP2

STEP3

STEP4

Touchscreen

※For MA-1 only

90°

120°

90°

0 °

CAUTION

・Be careful not to pinch your ngers when moving the arm.

・Do not hold the arm or camera head when carrying the product.

・Be careful not to give an impact to the camera head.

・This product uses static electricity sensitive components.

In order to avoid malfunction from static electricity, hold the edge of the camera

head to rotate the camera head. Do not touch the rotating part.

Rotating part

◆CONNECTING TO A PROJECTOR OR MONITOR

1. Connect the product to a projector or monitor with the HDMI cable or the RGB cable.

2 Long press the Power button to turn on the product. (Power LED. ：Blue)

◆CONNECTING TO A PC

The product is compliant with UVC (USB video class) standard. You can transfer the

image via USB.

1. Connect the Type B terminal of the USB cable to [ ] connector in the back of

the product.

2. Connect the Type A terminal of the USB cable to the USB port of the . PC

3. Turn on the product. Power LED（：Blue ）

4. Turn on the PC. Launch the app and check the image.

The app (ELMO Interactive Toolbox) can be downloaded from the following website:

⇒ https://www.elmousa.com/software/

⇒ https://www.elmoeurope.com/index.php/en/products/software-choice

For details about the app (ELMO Interactive Toolbox), refer to the Instruction Manual

in the website above.

CAUTION

・This product does not support USB power supply.

・When the battery is not fully charged or when the remaining battery level is low,

supply power by connecting the AC adapter to a wall outlet.

・The frame rate may be decreased depending on the PC used.

USB cable Type B ⇒

Type A

USB USB cable ⇒ port

HDMI cable

RGB cable

・The maximum zoom ratio is 16x (digital zoom). The image quality will be degraded

when using the digital zoom.

・The zoom ratio can also be adjusted by performing a pinch gesture on the

touchscreen.

Enlarge Pinch out Spread the distance between two ngers：＝

Shrink Pinch in：＝ Shorten the distance between two ngers

➌ USING THE PRODUCT

Various functions or settings can be operated or congured from the menu (texts or

icons) displayed on the touchscreen or external monitor or using the buttons on the

operating panel.

For MA-1: Button operations on the operating panel / touchscreen operations / mouse

operations on the external monitor via USB

For MO-2: Button operations on the operating panel / mouse operations on the

external monitor via USB

◆OPERATING MA-1

MA-1 can be operated by either one of the following ways: touchscreen operations or

mouse operations on the external monitor via USB or button operations on the

operating panel ( P.12) ⇒

■ADJUSTING THE IMAGE SIZE

The size of the image can be adjusted using [ ] buttons on the operating panel./

：To enlarge the camera image.

：To shrink the camera image.

The zoom ratio can also be adjusted by using the Zoom slider in the Zoom area, which

will be displayed on the touchscreen by selecting the bottom tab in the Document camera

screen. ( P.14) ⇒

■ADJUSTING THE FOCUS

Press the AF button [ ] on the operating panel to automatically focus on the subject.

The AF can also be operated by using the AF button [ ] in the Zoom area, which will

be displayed on the touchscreen by selecting the bottom tab in the Document camera

screen. ( P.14) ⇒

NOTE

■ADJUSTING THE BRIGHTNESS

The Brightness adjustment slider [ ] will be displayed when the Brightness icon

[ ] in the Menu area ( P.17) is tapped ⇒.

The brightness of the image can be adjusted by moving the slider left and right.

The Brightness adjustment slider will disappear when outside area of the Brightness

adjustment slider is tapped.

※Brightness adjustment slider 7 levels -3~+3：（）

※ ：Default value 0

■ROTATING THE IMAGE

Tap the Image rotation icon [ ] in the Menu are 17) to a (⇒P.

rotate the image.

The image will rotate by 90 each time the icon is tapped. °

（0°／ °／90 180°／270 °）

※The rotation angle can be selected between 90 and 180 . ° °

( 33 Camera settings ⇒P. “Image rotation ngle”.)a

※The camera image with drawings does not rotate.

※ ：Default value 0

※The Image rotation icon will be displayed in the Status area

( P.13) during image rotation. ⇒

■TURNING ON OR OFF THE LED LIGHTING

Tap the LED lighting icon [ ] in the Menu area ( 17) to turn on the LED lighting. ⇒P.

(ON: )

Tapping the icon again will turn o the LED lighting.

Rotation

status

Icon

0 °

－

90°

180°

270°

Brightness adjustment slider

－

＋

CAUTION

• To take shots of people, turn o the LED lighting.

• Make sure that the light from the LED lighting does not shine directly into your

eyes.

• This product is equipped with a high-brightness LED. You can safely use it to light

up the subject. The brightness will gradually decrease with long-term use. This is

not a malfunction but a characteristic of the LED.

• Do not touch the LED lighting while it is on as it may become very hot.

■PAUSING THE IMAGE

Pressing the Freeze button [ ] on the operating panel to pause the camera image.

Press the button again to restart.

※ ⇒Long press To perform the Automatic Deskew function.

(The product will automatically detect the skew angle of the document such as a

printing paper and a textbook in the shooting area and correct it to t the screen.)

（⇒ ）P.56

※If the product is turned o during freeze, the setting will not be

saved the next time the product is turned on.

※The Freeze icon will be displayed in the Status are ( P.14) a ⇒

during freeze.

■CAPTURING STILL PICTURES

Press the Capture button [ ] on the operating panel or tap the Capture icon [ ]

in the Menu area ( P.17) on the touchscreen to capture the camera image. ⇒

(Captured still pictures will be saved as JPEG le in the recording media.)

※To change the destination for captured still pictures, long press (for about 1 second)

the button or icon. The sub menu will be displayed and you can change the

destination. The image capture will be performed once the destination is changed.

※The drawings on the image can also be saved. ( P.15) ⇒

Captured still pictures can be saved in the following destination: SD card / USB ash

drive / internal storage

(The currently selected device will be displayed as destination in the Status area .)

■RECORDING VIDEOS

Press the Record icon [ ] in the Menu area ( P.17⇒) to start recording of the camera

image.

To stop recording, press the icon again. (Recording: )

※To temporarily change the destination for recorded videos, long press the button or

icon. The sub menu will be displayed and you can change the destination.

※The camera image and the added drawings can be recorded as video. ( P.15, 39) ⇒P.

※The recording will be performed at the set recording quality. ( 33 Camera settings ⇒P.

“Recording quality”.)

Recorded videos can be saved in the following destination: SD card / USB ash drive /

internal storage

As the capacity of the internal storage is limited, it is recommended to set the

destination to either SD card or USB ash drive.

Status

Icon

Live

－

Freeze

・The maximum zoom ratio is 16x (digital zoom). The image quality will be degraded

when using the digital zoom.

◆OPERATING MO-2

■ADJUSTING THE IMAGE SIZE

The size of the image can be adjusted using [ ] buttons on the operating panel./

：To enlarge the camera image.

：To shrink the camera image.

The zoom ratio can also be adjusted by using the Zoom slider in the Zoom area, which

will be displayed on the connected external monitor by selecting the bottom tab in the

Document camera screen using the mouse. ( P.14) ⇒

■ADJUSTING THE FOCUS

Press the AF button [ ] on the operating panel to automatically focus on the subject.

The can also be operted by using the AF button in the Zoom area, which will be AF

displayed on the connected external monitor by selecting the bottom tab in the

Document camera screen using the mouse. ( P.14) ⇒

■ADJUSTING THE BRIGHTNESS

The brightness can be adjusted by using [ / ] buttons on the operating panel.

The brightness adjustment can also be performed by using the Brightness adjustment

slider displayed on the connected external monitor.

The Brightness adjustment slide [ ] will be displayed when the Brightness icon r

[ ] in the Menu area ( P.17) is clicked by the mouse ⇒.

The brightness of the image can be adjusted by moving the slider left and right.

The Brightness adjustment slider will disappear when outside area of the Brightness

adjustment slider is clicked.

※Brightness adjustment slider 7 levels -3~+3 ：（）

※ ：Default value 0

■ROTATING THE IMAGE

Press the Image rotation button [ ] on the operating panel to rotate the image.

The image will rotate by 90 each time the icon is tapped. °

（0°／ °／90 180°／270 °）

The image rotation can also be performed by using the Image rotation icon displayed on

NOTE

Brightness adjustment slider

－

＋

the connected external monitor.

The Image rotation icon will be displayed on the connected external

monitor in the Menu area, which will be displayed by selecting the

bottom tab in the Document camera screen using the mouse. ( P.17) ⇒

※The rotation angle can be selected between 90 and 180 . ° °

( 33 Camera settings ⇒P. “Image rotation ngle”.)a

■TURNING ON OR OFF THE LED LIGHTING

Press the LED lighting button [ ] on the operating panel to turn on the LED lighting.

Pressing the button [ ] again will turn o the LED lighting.

On or o t LED lighting can also be performed by clicking the LED lighting icon [ ] in he

the Menu area (⇒P.17) displayed on the external monitor using the mouse.

■PAUSING THE IMAGE

Pressing the Freeze button [ ] on the operating panel to pause the camera image.

Press the button again to restart.

The image freeze can also be performed by clicking the Freeze icon [ ] in the Menu

area ( 17) displayed on the external monitor using the mouse. ⇒P.

※ ⇒Long press To perform the Automatic Deskew function.

(The product will automatically detect the skew angle of the document such as a

printing paper and a textbook in the shooting area and correct it to t the screen.)

（⇒ ）P.56

※If the product is turned o during freeze, the setting will not be saved the next time

the product is turned on.

※The Freeze icon will be displayed in the Status area ( during freeze. ⇒P.14)

Rotation

status

Icon

0 °

－

90°

180°

270°

Status

Icon

Live

－

Freeze

CAUTION

• To take shots of people, turn o the LED lighting.

• Make sure that the light from the LED lighting does not shine directly into your

eyes.

• This product is equipped with a high-brightness LED. You can safely use it to light

up the subject. The brightness will gradually decrease with long-term use. This is

not a malfunction but a characteristic of the LED.

• Do not touch the LED lighting while it is on as it may become very hot.

■SELECTING THE IMAGE SOURCE

The source of the image to be displayed on the external monitor can be switched easily.

Camera image ：

Press the Home button [ ] to open the Home screen. Then click the Camera icon

[ ] or press the Camera button [ ] on the operating panel.

Images being input to HDMI IN ：

Press the Home button [ ] to open the Home screen. Then click the External input

select icon [ ] or press the External input button [ ] on the operating panel.

Images saved in the card or the USB ash drive SD ：

Press the Home button [ ] to open the Home screen. Then click the Gallery icon

[ ] to display a list of content items.

Up（）Capture

Right

（）Freeze

Down Vide（

Left

（）Image rotation

Enter

（）LED lighting

➍

➍➍ ADVANCED OPERATIONS

◆OPERATING THE HOME SCREEN

MA-1

Press the Home button [ ] on the operating panel to display the Home screen on

the touchscreen or the connected external monitor.

Select the item to operate by tapping the touchscreen or by clicking with the mouse.

MO-2

Press the Home button [ ] on the operating

panel to display the Home screen on the connected

external monitor.

Move the cursor by using the mouse or by using the

Four-way control buttons on the operating panel as

shown to the right. Press the LED lighting button to

execute.

Press the Home button [ ] to return.

The installed apps will be displayed in the Home screen.

You can select a desired app to launch.

You can hide or display apps from the Home screen.

■Home screen

The icon of the installed app will be added to the list of installed apps.

(Icons will be displayed in the order in which they are added.)

※ If the number of apps becomes large, the icons will be added to the bottom and

cannot be displayed in one screen. To view such icons, scroll down the screen.

Settings icon P.33（⇒ ）

Battery status（⇒ ）P.62

Installed application software

Icon

App. name

Function

Reference

Camera

To display the camera image.

⇒P.13

External input

switching

To switch between the camera image and

the HDMI IN image.

⇒P.25

⇒P.29

Whiteboard

To display the Whiteboard screen. (In case

that the Whiteboard app has not been used

before, a new whiteboard will be created.)

⇒P.38

gallery

To display a list of content items.

Files such as still pictures, videos, PDF les

and Excel les stored in the internal

storage, SD card or USB ash drive can be

opened.

⇒P.43

QR Code Reader

To enter the QR code reader mode.

After reading the QR code, the product will

start the browser and access the Internet.

⇒P.48

Miracast

To connect a device which supports

Miracast.

⇒P.52

browser

To start the browser to access the Internet.

※The network conguration needs to be

completed in advance.

※The product needs to be connected to the

Internet via WiFi or LAN.

⇒P.40

timer

To sound an alarm at a set time.

⇒P.54

Elmo Play

To access the portal run by ELMO.

Apps on the portal can be downloaded.

⇒P.55

File manager

To open folders of the internal storage, SD

card or USB ash drive.

⇒P.55

Scottie Go!Edu

This is an educational app for learning

programming.

－

WPS Oce

To open the les such as PDF les, Word

les, Excel les and PowerPoint les

stored in the internal storage, SD card or

USB ash drive.

⇒P.46

Settings

To display the Settings screen.

⇒P.35

Digital textbook

To access the server for the digital textbook

to open the digital textbook.

⇒P.49

※To open PDF les or Excel les in the Gallery, the app “WPS” will be needed.

(WPS is installed in the MA-1 as default. For MO-2, install it from ELMO Play. ( ⇒P.55))

Produkt Specifikationer

Mærke:	Elmo
Kategori:	Overheadprojektor
Model:	MO-2
Bredde:	218.44 mm
Dybde:	114.3 mm
Højde:	343 mm
Vægt:	952.5 g
Produktfarve:	Hvid
Antal USB 2.0-porte:	2
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Strømforsyningstype:	DC/batteri
Understøttede grafikopløsninger:	1920 x 1080 (HD 1080)
Batterilevetid (maks.):	3 t
Digital zoom:	16 x
Autofokus:	Ja
Maksimum billedhastighed:	30 fps
Driftsspænding:	5 V
USB-stik type:	USB Type-A, USB Type-B
Optisk sensorstørrelse:	- "
Maksimale blænderåbning tal:	2
Lyskilde:	LED
Lydudgang:	Ja
Antal RJ-45-porte:	1
Dimensioner foldet sammen (BxDxH):	218.44 x 114.3 x 57.2 mm
Antal HDMI-indgangsporte:	1
Antal HDMI-udgangsporte:	1
Billedområde (BxD):	330.2 x 438.15 mm