EtherWAN EX19162A Manual

EtherWAN Netværkskort/adapter EX19162A

Læs nedenfor 📖 manual på dansk for EtherWAN EX19162A (2 sider) i kategorien Netværkskort/adapter. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Copyright 2022 EtherWAN Systems, Inc.
Page 1
All Rights Reserved
EX19162A
11/01/2022
1 Unpacking
Unpack the items. Your package should include:
One EX19162A Ethernet PoE switch
One AC power cord
Rack-mounting hardware kit
If items are missing or damaged, notify your
EtherWAN representative. Keep the carton and
packing material.
2 What Else You Need
Category 5e or better Ethernet cables
Small form-factor pluggable (SFP) optical
transceiver modules for optional fiber
connectivity
3 Select a Location
Desktop installations: Mount on a flat table
or shelf surface.
Rack installations: Use a 19-inch EIA standard
equipment rack that is grounded and
physically secure.
Identify a power source within 6 feet (1.8
meters).
Choose a dry area with ambient temperature
between 0 and 40ºC (32 and 104ºF).
Do not cover fans on the rear and side.
Keep away from heat sources, sunlight, warm
air exhausts, hot-air vents, and heaters.
Be sure there is adequate airflow.
Keep the switch at least 6 ft (1.83 m) away
from the nearest source of electromagnetic
noise, such as a photocopy machine.
4 Connect to the Data Ports
Sixteen Gigabit RJ45 PoE+ Ports
The switch is equipped with 16 10/100/1000
Mbps RJ45 ports that provide IEEE802.3at Power
over Ethernet (PoE+), with up to 30W per port
(250W total PoE power budget). These ports can
be connected to PoE devices such as IP
surveillance cameras or Voice Over Internet
Protocol (VoIP) phones.
A.
Insert one end of a Category 5e or better
Ethernet cable into a PoE port (ports 1 to 16)
on the switch.
B.
Connect the other end into the Ethernet port
of the device.
C.
Repeat steps A and B for each additional
device you want to connect to the switch.
Four Gigabit Data Uplink Ports
Ports 17 to 20 can be used as data uplink ports,
with ports 17 and 18 being RJ45 and ports 19 and
20 being SFP.
The SFP ports accommodate standard SFP
modules; wear an ESD-preventive wrist strap
before connecting SFP modules.
5 Apply AC Power
A.
Connect the female end of the supplied AC
power adapter cable to the power receptacle
on the switch rear panel. Connect the other
end to a grounded 3-pronged AC outlet.
B.
On the switch rear panel, move the ON/OFF
switch to the ON position.
When you apply AC power:
The fans start.
The
Power
LED goes ON.
The
Link/ACT
LEDs turn on for every port
connected to a networked device.
The
PoE
LEDs also turn on for every port
connected to a PoE powered device.
EX19162A PoE Switch Installation Guide

Produkt Specifikationer

Mærke: EtherWAN
Kategori: Netværkskort/adapter
Model: EX19162A

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN EX19162A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Netværkskort/adapter EtherWAN Manualer

EtherWAN

EtherWAN EX41922-T Manual

2 December 2024
EtherWAN

EtherWAN EX42005-00-1-A Manual

2 December 2024
EtherWAN

EtherWAN EX19082A Manual

2 December 2024
EtherWAN

EtherWAN EX19244 Manual

2 December 2024
EtherWAN

EtherWAN EX19162A Manual

2 December 2024

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

OpenVox

OpenVox AE2410E40 Manual

19 November 2024
StarTech.com

StarTech.com ST1000SPEXD2 Manual

18 November 2024
StarTech.com

StarTech.com O1210I-NETWORK-CARD Manual

17 November 2024
Nexxt

Nexxt Lynx 1300-AC Manual

16 November 2024
Edimax

Edimax EU-4307 V2 Manual

16 November 2024
Devolo

Devolo MicroLink dLAN duo Manual

15 Oktober 2024
LevelOne

LevelOne FNC-0109TX Manual

14 Oktober 2024
StarTech.com

StarTech.com USB4000IP Manual

13 Oktober 2024
StarTech.com

StarTech.com USBC3LINK Manual

13 Oktober 2024
StarTech.com

StarTech.com USBA-BLUETOOTH-V5-C2 Manual

13 Oktober 2024