Exibel Enderbite H-801 Manual

Exibel Hovedtelefoner Enderbite H-801

Læs nedenfor 📖 manual på dansk for Exibel Enderbite H-801 (7 sider) i kategorien Hovedtelefoner. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/7
UNITED KINGDOM - CUSTOMER SERVICE contact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
postal: Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER
English
1
2
3
4
7
5
6
Ver. 20200129
Wireless Earphones
with Microphone
Art. no 38-8856-1/2/3/4 Model Enderbite/H-801
Please read theentire instruction manual before using theproduct
and then save it for future reference. Wereserve theright for any
errors in text or images and any necessary changes made to technical
data. Intheevent of technical problems or other queries, please
contact our Customer Services (see address details on theback).
Things to consider:
Other wireless equipment using thesame frequency band can
reduce therange.
Therange of all wireless equipment depends on thetype of
obstacles located between thetransmitter and thereceiver
(e.g. aconcrete wall will interfere with thesignal more than
aplasterboard wall).
If you experience problems, try thefollowing:
Turn off any other existing wireless equipment to check whether
this is thecause of theproblem.
Reposition thewireless equipment, shorten thedistance between
thetransmitter and thereceiver or reduce thenumber of
obstacles (walls, furniture,etc.) betweenthem.
Reattempt to establish aconnection between theheadphones
and your external device.
Safety
Important
Care should be taken when theearphones are worn whilst
walking or running. Thevolume should be kept at a level which
enables surrounding sounds to beheard.
Do not use theproduct if doing so could pose adanger to
yourself or others.
Check your local regulations regarding mobile phone use in
combination with driving.
Do not subject theproduct to impacts, shocks, humidity, water,
extreme temperatures or dusty conditions.
Do not place theproduct in continuous sunlight or near naked
flames.
Do not use theproduct in areas where you are requested to
turn off your mobile phone, such as in hospitals, aircraft or areas
where there is arisk of explosion.
Protect your hearing. Listening on high volume for prolonged
periods can lead to permanent hearingloss. Setthevolume to
alow level before using theproduct.
Do not use theproduct in theevent of athunderstorm, risk of
electricshock.
Never leave theproduct charging for extended periods when
Buttons and functions Switching on/off
Hold down [ ] for approximately 2 seconds. Release On:
thebutton when theLED indicator flashesblue.
Hold down [ ] for 3 seconds. Release thebutton when Off:
theLED indicator flashesred.
Listening to audio
1. Start playback on your connected Bluetooth device.
2. Adjust thevolume and manage playback using thecontrols on
theexternal device or thebuttons on theearphones.
Note: The following functions only work on certain phone models.
Play/pause: Press once on [ ].
Advance to thenext track: Hold down [ + ] for 2 seconds.
Go to theprevious track: Hold down [ – ] for 2 seconds.
Increase thevolume: Press several times on [ + ].
Decrease thevolume: Press several times on [ – ].
(An audible signal will sound in theearphones when
themaximum or minimum volume level has been reached).
Call management
To answer anincoming call: Press once on [ ].
To end acall: Press once on [ ].
To reject anincoming call: Hold down [ + ] or [ – ] for 2 seconds.
Siri/Google Assistant
To activate Siri/Google Assistant: Press [ ] twice in quick succession.
Troubleshooting guide
The earphones
will not
switchon.
Make sure that thebattery is charged.
Referto the section.Charging
The battery
does not
charge.
If you are using acomputer as apower
source, check that it is on and not in
standbymode.
Check that theMicro-USB cable is correctly
connected to both theearphones and
thecomputer/adapter.
The earphones
won’t connect
to (pair with)
theexternal
device.
Place theearphones next to thedevice that
you are trying to connect themto.
Make sure that:
- Both devices are switchedon.
- The Bluetooth function is enabled on
thedevice you are trying to connectto.
Poor or
nosound.
Adjust thevolume on both your telephone
and theearphones.
Make sure that theBluetooth connection has
been properly established.
Test playback from your telephone without it
being connected to theearphones to check
that itworks.
Try playback using another file or track,
theone you are attempting to play may be
corrupt.
Make sure that no other wireless devices are
disrupting your Bluetooth connection.
Make sure that your telephone is within
the10 m reception range of theearphones.
Care and maintenance
Use adry cloth to wipe theearphones clean when needed.
Always switch theearphones off when they are not inuse.
Responsible disposal
1. Right earphone
2. Left earphone
3. Microphone and LED indicator.
4. [ + ] Press repeatedly to raise
thevolume, hold down to
play thenext track or reject
incomingcalls.
5. [ ] Press and hold down to
turn on/off or pair with another
device. Short-press to play or
pause atrack or answer/end
atelephonecall. Presstwice in
quick succession to activate Siri/
Google Assistant.
6. [ – ] Press repeatedly to lower
thevolume, hold down to play
theprevious track or reject
incomingcalls.
7. Micro-USB port for theincluded chargercable.
Instructions for use
The earphones come with three pairs of different sized earbuds.
Try them all for size to find out which ones fit youbest.
Charging
Charge thebattery for1.5 hours before using theearphones for
thefirsttime.
1. Connect theincluded charger lead to theMicro-USB port on
theearphones (7) and to acomputer or other USB charger.
2. The LED indicator (3) will shine asteady red while charging is in
progress and change to blue when thebattery is fully charged.
The LED indicator will flash red when thebattery power islow.
Charge thebattery.
Connecting a Bluetooth device (pairing)
Before theearphones can be used they must first be paired with
aBluetooth device. EachBluetooth device only needs
to be paired with theearphonesonce.
1. Make sure that theearphones are turned off by checking that
theLED indicator is not flashing.
2. Hold in [ ] for approx. 4seconds until theLED indicator
flashes red/blue.
3. Activate Bluetooth mode on theexternal device that you want
to connect theearphonesto. Search for theearphones on your
Bluetooth device (refer to themanual for your device).
4. The earphones will appear on your device as “ ”, Enderbite
select connect.
5. When contact has been established theLED indicator will
indicate asuccessful connection by flashing blue every 5
seconds.
NOTE
The earphones will automatically connect to thelast connected
device provided they are both switched on and have Bluetooth
activated.
If you are prompted to enter aPIN code on your device, you
should enter “0000” (four zeroes). Certain devices may also
require you to approve theconnection.
If you have connected amobile phone to theearphones and
receive acall whilst you are listening to music, themusic will
be switched off automatically. Oncethecall has ended, music
playback will be resumed (if your phone settings enable this).
it is not inuse. Discontinue charging during
thunderstorms.
Never attempt to repair, modify or disassemble
theproduct.
Never let children play with theproduct.
This symbol indicates that theproduct should not be
disposed of with general householdwaste. Thisapp-
lies throughout theentireEU. Inorder to prevent any
harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed
in for recycling so that thematerial can be disposed of
in aresponsible manner. Whenrecycling your product,
take it to your local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is disposed of in an
environmentally sound manner.
Specifications
Bluetooth
Version Ver5.0
10 mRange
5 dBmOutput
2402–2480 MHzFrequency range
Battery capacity 60 mAh
Charging time approx. 1.5 hours
Listening time approx. 4hours
Standby time approx. 20hours
Weight 13.4 g


Produkt Specifikationer

Mærke: Exibel
Kategori: Hovedtelefoner
Model: Enderbite H-801

Har du brug for hjælp?

Hvis du har brug for hjælp til Exibel Enderbite H-801 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hovedtelefoner Exibel Manualer

Exibel

Exibel MBH-300 Manual

22 August 2024
Exibel

Exibel 953 Manual

22 August 2024
Exibel

Exibel BIX80 Manual

22 August 2024
Exibel

Exibel BIX82 Manual

22 August 2024
Exibel

Exibel MBH-600 Manual

22 August 2024

Hovedtelefoner Manualer

Nyeste Hovedtelefoner Manualer