Freestyle Predator Manual

Freestyle Ur Predator

Læs nedenfor 📖 manual på dansk for Freestyle Predator (14 sider) i kategorien Ur. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/14

ENGLISH

SHARK PREDATOR

S1S4

S2S3

S1. Start/stop Button

S2. Lap/reset Button

S3. Mode Button

S4. Light Button

S5. Lap/reset Button

DISPLAY MODES:

The watch has seven display modes:

HOME TIME, FOREIGN TIME (T2),

ALARM 1 (AL1), ALARM2 (AL2),

CHRONOGRAPH (CHR), PACER and

TIMER (TMR).

To change from one display mode to

another, press S3 button once.

NOTE: In any setting mode, if there is

no manipulation for around 2 minutes,

the watch will automatically save

the entered data and exit the setting

procedure.

TO SET THE TIME AND CALENDAR:

1. Press S3 button to select HOME

TIME mode.

2. Press and hold S2 button for

around 3 seconds, the second digits

will blink.

3. Press S1 button to reset the second

digits to 00. This will increase the

time by 1 minute of the original

setting is at 30 to 59 seconds.

4. Press S3 button, the minute digits

will blink.

5. Press S1 button to set the minute

digits. Holding down the button will

speed up the process.

6. Press S3 button, the hour digits will

blink.

7. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

8. Follow the same pattern to set day

(of the week), year, month and date.

9. After nished making all the set-

tings, press S2 button to conrm.

NOTE: The year can be set within the

range of 2000 to 2099.

TO SET THE FOREIGN TIME:

1. Press S3 button to select FOREIGN

TIME mode.

2. Press and hold S2 button for

around 3 second. The hour digits

will blink.

3. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

4. After nished making all the set-

tings, press S2 button to conrm.

NOTE: In FOREIGN TIME settings,

only hour digits are open to setting.

The minutes and seconds counts are

synchronized between HOME TIME and

FOREIGN TIME mode.

TO SET THE HOUR FORMAT:

In HOME TIME mode, press S2 button

to toggle between 12-hour and 24-hour

format. The A.M. and P.M. indicators

will be displayed in 12-hour format.

NOTE: The chosen hour format will

apply to both HOME TIME mode and

FOREIGN TIME mode.

TO TURN ON/OFF THE HOURLY

CHIME:

In HOME TIME mode,

1. Press S1 button to activate or

deactivate the hourly chime func-

tion.

2. When the hourly chime function is

activated, the hourly chime indica-

tor will appear.

TO SET THE DAILY ALARMS:

1. Press S3 button to select ALARM1

or ALARM2 mode to set.

2. Press and hold S2 button for around

3 seconds, the minute digits will

blink.

3. Press S1 button to set the minute

digits. Holding down the button will

speed up the process.

4. Press S3 button, the hour digits will

blink.

5. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

6. After nished making all the set-

tings, press S2 button to conrm.

TO TURN ON/OFF THE DAILY ALARMS:

In ALARM1 or ALARM2 mode,

1. Press S1 button to activate or

deactivate the alarm function.

2. While the alarm function is

activated, the alarm indicator

/ will appear.

WHEN AN ALARM GOES OFF:

An alarm tune will be emitted at the

designated time when the alarm is

activated. To stop the tune, press any

button.

TO USE THE CHRONOGRAPH:

Press S3 button to select CHRONO-

GRAPH mode.

1. The chronograph will then be

displayed in its current state –

reset, running, or stopped.

2. To resume a counting, press S1

button to resume from where it left

off.

3. To start a new counting, reset the

stop watch to zero rst.

4. Press S1 button to stop count-

ing, then press S2 button to reset

the counter to zero.

For the measurement of elapsed time:

In CHRONOGRAPH mode,

1. Press S1 button to start counting.

To stop counting, press S1 button.

2. Press S1 button again to resume

from where it left off.

3. To reset to zero, press S1 button to

stop counting and then press S2

button.

For the measurement of split time:

In CHRONOGRAPH mode,

1. Press S1 button to start counting.

2. While the chronograph is running,

press S2/S5 button to register a lap.

The chronograph is still running in

the background.

After around 8 seconds, the

currently accumulated time will be

displayed.

3. Repeat the last step until all the

laps have been registered.

4. To stop counting, press S1 button.

Press S1 button again to resume

from where it left off.

5. To reset to zero, press S1 button to

stop counting, then press S2 button

to reset the counter to zero.

NOTE: The chronograph can record

up to a maximum of 10 laps. If you try

to record more than 10 laps, the lap

number will show a ashing “F” and

the extra laps will not be recorded.

NOTE: You can leave the chronograph

running while switching over to other

operating modes.

NOTE: The chronograph will count up

to 9 hours, 59 minutes and 59.99 sec-

onds before starting from zero again.

TO USE THE RECALL FUNCTION:

1. Press S3 button to select RECALL

mode.

2. Press S1 button to scroll through

the recorded individual lap and split

time.

NOTE: The recall function is available

only when there is lap record stored.

NOTE: The previous set of lap record

will automatically be replaced by the

next set of lap record.

TO USE THE PACER:

1. Press S3 button to select PACER

mode.

2. The pacer frequency will be dis

played above the home time.

3. Press S2 button to cycle among the

pre-set values 40, 45, 50, 55, 60, 65,

70, 75, 80, 85, 90, 95, 100, 110,

120, 130, 140, 150 and 160 beeps

per minute.

4. After nished making all the

settings, press S1 button to start

the pacer.

5. To stop the pacer, press S1 button

again.

TO SET THE TIMER:

1. Press S3 button to select TIMER

mode.

2. Press and hold S2 button, the

second digits will blink.

3. Press S1 button to set the second

digits. Holding down the button will

speed up the process.

4. Press S3 button, the minute digits

will blink.

5. Press S1 button to set the minute

digits. Holding down the button will

speed up the process.

6. Press S3 button, the hour digits will

blink.

7. Press S1 button to set the hour

digits. Holding down the button will

speed up the process.

8. After nished making all the set-

tings, press S2 button to conrm.

NOTE: The timer can be set up to a

maximum of 9 hours, 59 minutes and

59 seconds.

TO USE THE TIMER:

1. Press S3 button to select TIMER

mode.

2. The timer will be displayed in its

current state – reset, running, or

stopped.

3. To resume a counting, press S1

button to resume from where it left

off.

4. To start a new counting, reload the

timer rst.

Press S1 button to stop counting

Produkt Specifikationer

Mærke:	Freestyle
Kategori:	Ur
Model:	Predator

Har du brug for hjælp?

Hvis du har brug for hjælp til Freestyle Predator stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Freestyle Manualer

Freestyle Predator Manual

31 August 2024

Freestyle Predator FS84997 Manual

23 Juli 2024

Ur Manualer

Nyeste Ur Manualer

Diesel Rasp Nsbb DZ1872 Manual

15 December 2024

Fossil Collider Hybrid HR FTW7009 Manual

15 December 2024

Fossil Neutra Hybrid HR FTW7027 Manual

15 December 2024

Fossil Neutra Hybrid HR FTW7025 Manual

15 December 2024

Fossil Monroe Hybrid HR FTW7035 Manual

15 December 2024

Fossil Collider Hybrid HR FTW7008 Manual

15 December 2024

Fossil Monroe Hybrid HR FTW7039 Manual

15 December 2024

Ice Watch Ola Kids Manual

15 December 2024

TFA 60.4512.01 Manual

14 December 2024

Oregon Scientific PrysmaChrome BAR292A Manual

14 December 2024